]> git.gag.com Git - fw/openocd/history - src
flash/nor/stm32h7x: remove unused 'pages_per_sector' from stm32h7x_part_info
[fw/openocd] / src /
2019-09-08 Tarek BOCHKATIflash/nor/stm32h7x: remove unused 'pages_per_sector...
2019-09-08 Tarek BOCHKATIflash/nor/stm32h7x: remove flash size information from...
2019-09-08 Caleb Szalacinskiflash/nor: flash driver for Synwit SWM050 MCUs
2019-09-08 Han Hartgerstarget/dsp563xx: dsp563xx restore reg support
2019-09-08 Seth LaForgesrc/flash/nand: Fix some operator precedence bugs.
2019-08-28 Tim Newsomegdb_server, rtos: Fine-grained RTOS register access
2019-08-04 Tarek BOCHKATIflash/nor/core: fix some minor typo
2019-07-28 Andreas Fritiofsonmflash: Remove this broken flash driver
2019-06-20 Antonio Borneocortex_m: set C_DEBUGEN in soft_reset_halt
2019-06-20 Antonio Borneohelper/options: simplify the code using command_run_linef()
2019-06-20 Christopher Headhelper/command: make command_run_line reentrant
2019-06-19 Marc Schinktarget/cortex_m: Add support for AHB5-AP
2019-06-19 Marc Schinktarget/arm_adiv5: Add type for AHB5-AP
2019-06-19 Omair JavaidSupport for debugging on ARMv8-M CPUs
2019-06-14 Antonio Borneotarget/cortex_a: remove dependency from jtag queue
2019-06-14 Antonio Borneotarget/aarch64: remove dependency from jtag queue
2019-06-13 Antonio Borneojtag: fix error on TCL command "return" in jtag event...
2019-06-13 Antonio Borneotarget: fix error on TCL command "return" in target...
2019-06-13 Tarek BOCHKATIflash/stm32h7x: fix register names to comply with RM039...
2019-06-13 Tilman Sauerbeckjtag: drivers: buspirate: chunk SWD switch sequence...
2019-06-13 Christopher Headjtag/drivers/jtag_usb_common: fix typo
2019-06-12 Tomas Vanektarget: make target re-configuration possible again
2019-06-12 Michael Schwingenfix XScale register access
2019-06-12 Antonio Borneomem_ap: fix format of logged addresses
2019-06-12 Daniel GoehringARMv8: Update rtos_reg storage from 8 to 16 bytes
2019-06-12 Florian Fainelliarmv7a_mmu: Add support for decoding Super Sections
2019-06-12 Florian Fainelliarmv7a_mmu: Do not restrict virtual addresses to uint32_t
2019-06-12 Florian Fainelliarmv7a_mmu: Remove armv7a_mmu_translate_va()
2019-06-12 Florian Fainelliarmv7a_mmu: Check earlier for PAR read
2019-06-10 Tomas Vanektarget/armv7m: fix register number in armv7m_get_core_reg()
2019-06-06 Antonio Borneojtag: set default "jtag_only" to uninitialized transports
2019-06-06 Antonio Borneogdb_server: remove call to jtag_execute_queue()
2019-06-06 Antonio Borneotarget/cortex_m: remove dependency from jtag queue
2019-06-06 Antonio Borneohelper: add bitmap helper primitives
2019-06-06 Antonio Borneojtag: simplify management of non-implemented handlers
2019-06-06 Antonio Borneoswd: remove unused API frequency()
2019-06-04 Andreas FritiofsonConvert DEBUG_JTAG_IO to LOG_DEBUG_IO
2019-06-04 Bohdan Tymkivgdb_server: fix GDB_BUFFER_SIZE usage, fix unaligned...
2019-05-31 Oleksij Rempeljlink: add usb location support
2019-05-31 Marc Schinkjtag/drivers/jtag_usb_common: Fix variable name
2019-05-31 Oleksij Rempellibjaylink: Update to latest Git version
2019-05-31 Marc Schinkjtag/drivers/jtag_usb_common: Remove warning
2019-05-25 Leonard Crestezarm_adi_v5: Split CSW bits into AHB/APB/AXI
2019-05-23 Tomas Vanektarget: make handle_md_output() global
2019-05-23 Tarek BOCHKATIcortex_m: set the debug reason to DBGRQ when NVIC_DFSR...
2019-05-23 Antonio Borneohelper/command: remove dead code in command_unknown()
2019-05-23 Antonio Borneotarget: remove unused function target_buffer_get_u8()
2019-05-17 Antonio Borneohelper/command: print the command output in case of...
2019-05-16 Marc SchinkFix 'adapter usb location' documentation
2019-05-15 Jan Matyasjtag/drivers/imx_gpio: fixed calls to command_print
2019-05-15 Antonio Borneodrivers/bcm2835gpio: fix build for ARM host
2019-05-14 Jan Matyasjtag_vpi: fixed state transitions in "stableclocks"
2019-05-14 Megan Wachsjtag_vpi: correct runtest behavior
2019-05-14 Marc Schinktarget: Fix breakpoint usage
2019-05-14 Antonio Borneohelper/command: fix printing usage for incomplete commands
2019-05-14 Antonio Borneohelper/command: send command output only to the right...
2019-05-14 Antonio Borneotarget: fix output of command "targets"
2019-05-14 Antonio Borneohelper/command: remove search for "ocd_" prefix
2019-05-14 Paul Fertserhelper/command: remove command "command type"
2019-05-14 Paul Fertserhelper/command: do not replace new commands with ocd_...
2019-05-14 Paul Fertserhelper/command: do not capture log in script_command_run()
2019-05-14 Paul Fertserhelper/command: Handle Tcl return values consistently
2019-05-14 Paul Fertserflash/nor: use command_print() in command "flash banks"
2019-05-14 Paul Fertsernor/niietcm4: fix indentation
2019-05-14 Antonio Borneohelper/command: change prototype of command_print/comma...
2019-05-14 Paul Fertserjlink: change prototype of show_config*() functions
2019-05-14 Paul Fertsertarget/esirisc_trace: change prototype of trace dump...
2019-05-14 Paul Fertsertarget/esirisc_trace: change prototype of trace analyse...
2019-05-14 Paul Fertsertarget: change prototype of binprint()
2019-05-14 Paul Fertsertarget: change prototype of handle_bp_command_set()
2019-05-14 Paul Fertsertarget: change prototype of handle_bp_command_list()
2019-05-14 Paul Fertsertarget: change prototype of handle_md_output()
2019-05-14 Paul Fertsertarget/arm_adi_v5: change prototype of dap_rom_display()
2019-05-14 Paul Fertsertarget/etm: change prototype of etmv1_analyze_trace()
2019-05-14 Paul Fertsertarget/x86_32_common: change prototype of handle_iod_ou...
2019-05-14 Paul Fertsertarget/armv7a_cache_l2x: change prototype of arm7a_hand...
2019-05-14 Paul Fertsertarget/armv7a: change prototype of armv7a_handle_cache_...
2019-05-14 Paul Fertsertarget/armv4_5_cache: change prototype of armv4_5_handl...
2019-05-14 Paul Fertsertarget/dsp563xx: change prototype of handle_md_output()
2019-05-14 Paul Fertsertarget/armv8: change prototype of display_cache_info()
2019-05-14 Paul Fertsertarget/xscale: change prototype of xscale_display_instr...
2019-05-14 Paul Fertsertarget/xscale: change prototype of xscale_verify_pointer()
2019-05-14 Paul Fertsertarget/mips_m4k: change prototype of mips_m4k_verify_po...
2019-05-14 Paul Fertsertarget/mips32: change prototype of mips32_verify_pointer()
2019-05-14 Paul Fertsertarget/cortex_m: change prototype of cortex_m_verify_po...
2019-05-14 Paul Fertsertarget/arm946e: change prototype of arm946e_verify_poin...
2019-05-14 Paul Fertsertarget/arm720t: change prototype of arm720t_verify_poin...
2019-05-14 Paul Fertsertarget/arm966e: change prototype of arm966e_verify_poin...
2019-05-14 Paul Fertsertarget/arm926ejs: change prototype of arm926ejs_verify_...
2019-05-14 Paul Fertsertarget/arm920t: change prototype of arm920t_verify_poin...
2019-05-14 Paul Fertsernor/at91sam4: change prototype of get_current_sam4()
2019-05-14 Paul Fertsernor/at91sam3: change prototype of get_current_sam3()
2019-05-14 Paul Fertsernand/tcl: pass CMD to nand_list_walker()
2019-05-14 Paul Fertsernand/fileio: change prototype of nand_fileio_start()
2019-05-14 Antonio Borneotarget_request: replace command_print() with command_ou...
2019-05-14 Antonio Borneotarget: unify memory read/write commands
2019-05-14 Antonio Borneotarget: use LOG_USER to print errors in events
2019-05-14 Antonio Borneotarget: change prototype of target_process_reset()
2019-05-14 Antonio Borneohelper/command: add macro CMD
2019-05-14 Tomas Vanektarget/arm946e: rewrite jim_arm946e_cp15 to arm945e_han...
next