#!/bin/sh
-if [ -x /usr/bin/ao-flash-lpc ]; then
- FLASH_LPC=/usr/bin/ao-flash-lpc
+if [ -x ../ao-tools/ao-flash/ao-flash-lpc ]; then
+ FLASH_LPC=../ao-tools/ao-flash/ao-flash-lpc
+elif [ -x /usr/bin/ao-flash-lpc ]; then
+ FLASH_LPC=/usr/bin/ao-flash-lpc
else
- echo "Can't find ao-flash-lpc! Aborting."
- exit 1
+ echo "Can't find ao-flash-lpc! Aborting."
+ exit 1
fi
if [ -x /usr/bin/ao-usbload ]; then
exit 1
fi
-VERSION=1.0
PRODUCT=TeleGPS
+VERSION=1.0
BASE=`echo $PRODUCT | tr 'A-Z' 'a-z'`
echo $FILE
--- /dev/null
+/*
+ * Copyright © 2016 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#define LED_PORT_ENABLE STM_RCC_AHBENR_IOPAEN
+#define LED_PORT (&stm_gpioa)
+#define LED_PIN_RED 9
+#define LED_PIN_GREEN 10
+#define AO_LED_RED (1 << LED_PIN_RED)
+#define AO_LED_GREEN (1 << LED_PIN_GREEN)
+#define AO_LED_PANIC AO_LED_RED
+#define AO_CMD_LEN 128
+#define AO_LISP_POOL_TOTAL 3072
+#define AO_LISP_SAVE 1
+#define AO_STACK_SIZE 1024
+
+/* need HSI active to write to flash */
+#define AO_NEED_HSI 1
+
+#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN)
+
+#define AO_POWER_MANAGEMENT 0
+
+/* 48MHz clock based on USB */
+#define AO_HSI48 1
+
+/* HCLK = 48MHz */
+#define AO_AHB_PRESCALER 1
+#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+
+/* APB = 48MHz */
+#define AO_APB_PRESCALER 1
+#define AO_RCC_CFGR_PPRE_DIV STM_RCC_CFGR_PPRE_DIV_1
+
+#define HAS_USB 1
+#define AO_USB_DIRECTIO 0
+#define AO_PA11_PA12_RMP 1
+#define HAS_BEEP 0
+
+#define IS_FLASH_LOADER 0
+
+#endif /* _AO_PINS_H_ */
--- /dev/null
+/*
+ * Copyright © 2016 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <ao.h>
+
+static const struct ao_cmds blink_cmds[] = {
+// { lisp_cmd, "l\0Run lisp interpreter" },
+ { 0, 0 }
+};
+
+
+void main(void)
+{
+ ao_led_init(LEDS_AVAILABLE);
+ ao_clock_init();
+ ao_task_init();
+ ao_timer_init();
+ ao_dma_init();
+ ao_usb_init();
+ ao_cmd_init();
+ ao_cmd_register(blink_cmds);
+ ao_start_scheduler();
+}
+
+
--- /dev/null
+ao_product.h
+lambdakey*
--- /dev/null
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#include <ao_flash_stm_pins.h>
+
+/* Pin 5 on debug connector */
+
+#define AO_BOOT_PIN 1
+#define AO_BOOT_APPLICATION_GPIO stm_gpioa
+#define AO_BOOT_APPLICATION_PIN 15
+#define AO_BOOT_APPLICATION_VALUE 1
+#define AO_BOOT_APPLICATION_MODE AO_EXTI_MODE_PULL_UP
+
+/* USB */
+#define HAS_USB 1
+#define AO_USB_DIRECTIO 0
+#define AO_PA11_PA12_RMP 1
+
+#endif /* _AO_PINS_H_ */
--- /dev/null
+/*
+ * Copyright © 2012 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+MEMORY {
+ rom (rx) : ORIGIN = 0x08001000, LENGTH = 25K
+ flash (r): ORIGIN = 0x08007400, LENGTH = 3k
+ ram (!w) : ORIGIN = 0x20000000, LENGTH = 6k - 128
+ stack (!w) : ORIGIN = 0x20000000 + 6k - 128, LENGTH = 128
+}
+
+INCLUDE registers.ld
+
+EXTERN (stm_interrupt_vector)
+
+SECTIONS {
+ /*
+ * Rom contents
+ */
+
+ .interrupt ORIGIN(ram) : AT (ORIGIN(rom)) {
+ __interrupt_start__ = .;
+ __interrupt_rom__ = ORIGIN(rom);
+ *(.interrupt) /* Interrupt vectors */
+ __interrupt_end__ = .;
+ } > ram
+
+ .text ORIGIN(rom) + 0x100 : {
+ __text_start__ = .;
+
+ /* Ick. What I want is to specify the
+ * addresses of some global constants so
+ * that I can find them across versions
+ * of the application. I can't figure out
+ * how to make gnu ld do that, so instead
+ * we just load the two files that include
+ * these defines in the right order here and
+ * expect things to 'just work'. Don't change
+ * the contents of those files, ok?
+ */
+ ao_romconfig.o(.romconfig*)
+ ao_product.o(.romconfig*)
+
+ *(.text*) /* Executable code */
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ *(.rodata*) /* Constants */
+
+ } > rom
+ __text_end__ = .;
+
+
+ /* Boot data which must live at the start of ram so that
+ * the application and bootloader share the same addresses.
+ * This must be all uninitialized data
+ */
+ .boot (NOLOAD) : {
+ __boot_start__ = .;
+ *(.boot)
+ . = ALIGN(4);
+ __boot_end__ = .;
+ } >ram
+
+ /* Functions placed in RAM (required for flashing)
+ *
+ * Align to 8 bytes as that's what the ARM likes text
+ * segment alignments to be, and if we don't, then
+ * we end up with a mismatch between the location in
+ * ROM and the desired location in RAM. I don't
+ * entirely understand this, but at least this appears
+ * to work...
+ */
+
+ .textram BLOCK(8): {
+ __data_start__ = .;
+ __text_ram_start__ = .;
+ *(.ramtext)
+ __text_ram_end = .;
+ } >ram AT>rom
+
+ /* Data -- relocated to RAM, but written to ROM
+ */
+ .data : {
+ *(.data) /* initialized data */
+ . = ALIGN(4);
+ __data_end__ = .;
+ } >ram AT>rom
+
+ .bss : {
+ __bss_start__ = .;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } >ram
+
+ PROVIDE(end = .);
+
+ PROVIDE(__stack__ = ORIGIN(stack) + LENGTH(stack));
+
+ __flash__ = ORIGIN(flash);
+}
+
+ENTRY(start);