FIRMWARE_TM_1_0=$(top_srcdir)/src/telemetrum-v1.0-$(VERSION).ihx
FIRMWARE_TM_1_1=$(top_srcdir)/src/telemetrum-v1.1-$(VERSION).ihx
-FIRMWARE_TM=$(FIRMWARE_TM_1_0) $(FIRMWARE_TM_1_1)
+FIRMWARE_TM_1_2=$(top_srcdir)/src/telemetrum-v1.2-$(VERSION).ihx
+FIRMWARE_TM=$(FIRMWARE_TM_1_0) $(FIRMWARE_TM_1_1) $(FIRMWARE_TM_1_2)
FIRMWARE_TELEMINI_1_0=$(top_srcdir)/src/telemini-v1.0-$(VERSION).ihx
FIRMWARE_TELEMINI=$(FIRMWARE_TELEMINI_1_0)
File "../src/telemetrum-v1.0/telemetrum-v1.0-${VERSION}.ihx"
File "../src/telemetrum-v1.1/telemetrum-v1.1-${VERSION}.ihx"
+ File "../src/telemetrum-v1.2/telemetrum-v1.2-${VERSION}.ihx"
File "../src/telemini-v1.0/telemini-v1.0-${VERSION}.ihx"
File "../src/teledongle-v0.2/teledongle-v0.2-${VERSION}.ihx"
<section>
<title>Maximum Flight Log</title>
<para>
- TeleMetrum version 1.1 has 2MB of on-board flash storage,
+ TeleMetrum version 1.1 and 1.2 have 2MB of on-board flash storage,
enough to hold over 40 minutes of data at full data rate
(100 samples/second). TeleMetrum 1.0 has 1MB of on-board
storage. As data are stored at a reduced rate during descent
</para>
<para>
All of the configuration data is also stored in the flash
- memory, which consumes 64kB on TeleMetrum v1.1 and 256B on
+ memory, which consumes 64kB on TeleMetrum v1.1/v1.2 and 256B on
TeleMetrum v1.0. This configuration space is not available
for storing flight log data.
</para>
</para>
<para>
The default size, 192kB, allows for 10 flights of storage on
- TeleMetrum v1.1 and 5 flights on TeleMetrum v1.0. This
+ TeleMetrum v1.1/v1.2 and 5 flights on TeleMetrum v1.0. This
ensures that you won't need to erase the memory before
flying each time while still allowing more than sufficient
storage for each flight.
</listitem>
<listitem>
Select the image you want put on the TeleMetrum, which should have a
- name in the form telemetrum-v1.1-1.0.0.ihx. It should be visible
+ name in the form telemetrum-v1.2-1.0.0.ihx. It should be visible
in the default directory, if not you may have to poke around
your system to find it.
</listitem>
include Version
SUBDIRS=\
- telemetrum-v1.1 telemetrum-v1.0 \
+ telemetrum-v1.2 telemetrum-v1.1 telemetrum-v1.0 \
teledongle-v0.2 teledongle-v0.1 \
telemini-v1.0 telenano-v0.1 \
telebt-v0.0 telebt-v0.1 \
#define HAS_MONITOR 0
#endif
+#if defined(TELEMETRUM_V_1_2)
+ #define HAS_FLIGHT 1
+ #define HAS_USB 1
+ #define HAS_BEEP 1
+ #define HAS_GPS 1
+ #define HAS_SERIAL_1 1
+ #define USE_SERIAL_STDIN 0
+ #define HAS_ADC 1
+ #define HAS_EEPROM 1
+ #define HAS_LOG 1
+ #define USE_INTERNAL_FLASH 0
+ #define HAS_DBG 1
+ #define DBG_ON_P1 1
+ #define DBG_ON_P0 0
+ #define IGNITE_ON_P2 1
+ #define IGNITE_ON_P0 0
+ #define PACKET_HAS_MASTER 0
+ #define PACKET_HAS_SLAVE 1
+
+ #define HAS_COMPANION 1
+ #define COMPANION_CS_ON_P1 1
+ #define COMPANION_CS_MASK 0x4 /* CS1 is P1_2 */
+ #define COMPANION_CS P1_2
+
+ #define AO_LED_RED 1
+ #define LEDS_AVAILABLE (AO_LED_RED)
+ #define HAS_EXTERNAL_TEMP 0
+ #define HAS_ACCEL_REF 1
+ #define SPI_CS_ON_P1 1
+ #define SPI_CS_ON_P0 0
+ #define M25_CS_MASK 0x02 /* CS0 is P1_1 */
+ #define M25_MAX_CHIPS 1
+ #define HAS_ACCEL 1
+ #define HAS_IGNITE 1
+ #define HAS_MONITOR 0
+#endif
+
#if defined(TELEDONGLE_V_0_2)
#define HAS_FLIGHT 0
#define HAS_USB 1
#define AO_RDF_INTERVAL_TICKS AO_SEC_TO_TICKS(5)
#define AO_RDF_LENGTH_MS 500
-#if defined(TELEMETRUM_V_0_1) || defined(TELEMETRUM_V_0_2) || defined(TELEMETRUM_V_1_0) || defined(TELEMETRUM_V_1_1)
+#if defined(TELEMETRUM_V_0_1) || defined(TELEMETRUM_V_0_2) || defined(TELEMETRUM_V_1_0) || defined(TELEMETRUM_V_1_1) || defined(TELEMETRUM_V_1_2)
#define AO_TELEMETRY_SENSOR AO_TELEMETRY_SENSOR_TELEMETRUM
#endif
--- /dev/null
+telemetrum-*
+ao_product.h
--- /dev/null
+--directory=..
--- /dev/null
+include ../Makefile.proto
--- /dev/null
+PROG = telemetrum-v1.2-$(VERSION).ihx
+
+SRC = \
+ $(TM_BASE_SRC) \
+ $(SPI_DRIVER_SRC) \
+ $(M25_DRIVER_SRC) \
+ $(SKY_DRIVER_SRC) \
+ $(COMPANION_SRC) \
+ $(DBG_SRC)
+
+PRODUCT=TeleMetrum-v1.2
+PRODUCT_DEF=-DTELEMETRUM_V_1_2
+IDPRODUCT=0x000b