+++ /dev/null
-# Test suite Makefile
-# Part of SDCC - http://sdcc.sourceforge.net/
-# Michael Hope <michaelh@juju.net.nz> 2001
-#
-# This Makefile builds and runs the test suites under tests/ for each
-# one of the supported ports located under ports/. The test suite
-# results are summarised and individual test failures are logged. The
-# expected result is a single line per port summarising the number of
-# failures, test points, and test cases. The philosophy is that
-# checked in code should always pass the suite with no failures, as
-# then if there are failures then it is in the current developers code.
-#
-# Only the required suites are run. Changing sdcc causes all to be
-# re-run. Changing one suite causes just that to be run. Changing
-# one of the library files should cause all to re-run
-
-# Dependancies:
-# * The sdcc-extra package, available from CVS.
-# o cvs -d cvs.sdcc.sourceforge.net:/cvsroot/sdcc co sdcc-extra
-# o Provides the emulators
-# * The gbdk-lib package from gbdk.
-# o cvs -d cvs.gbdk.sourceforge.net:/cvsroot/gbdk co gbdk-lib
-# o Proviles mul, div, and include files for the z80 tests.
-# * python 1.5 or above
-# * uCsim for the mcs51 port
-#
-# The paths below assume that sdcc, sdcc-extra, and gbdk-lib all reside in
-# the same directory.
-
-# Old notes:
-# Starting at the bottom
-# Set of source test suites
-# Each source suite is processesd producing multiple device specific test suites.
-# Each device specific test suite is compiled.
-# Each device specific test suite is run, and the output recorded.
-# The output from each device specific test suite derrived from a source
-# test suite are collated.
-
-# Uncomment this to show only errors and the summary.
-# Comment this out for debugging.
-.SILENT:
-
-# All original tests live in TESTS_DIR and below
-TESTS_DIR = tests
-TESTS_NAME = $(TESTS_DIR)
-# All suite results go in RESULTS_DIR
-RESULTS_DIR = results
-# All data relating to supported ports live in their own directory
-# under PORTS_DIR.
-PORTS_DIR = ports
-
-# Itermediate data directories
-# Directory that generated cases and the related object code go.
-CASES_DIR = gen
-
-# Script that takes a source test suite and generates the iterations
-GENERATE_CASES = generate-cases.py
-
-# Magically generate the list of configured ports to test.
-# Each directory under ports/ is used as a port name. Each port is tested.
-# Each port must have a spec.mk which describes how to build the object
-# files and how to run the emulator.
-ALL_PORTS = $(filter-out CVS xa51 ucz80 gbz80,$(notdir $(wildcard $(PORTS_DIR)/*)))
-
-# These ports will be cleaned with 'make clean'
-CLEAN_PORTS = $(filter-out CVS,$(notdir $(wildcard $(PORTS_DIR)/*)))
-
-MAKE_LIBRARY =
-
-all: test-ports
-
-# Test all of the ports
-test-ports:
- for i in $(ALL_PORTS); do $(MAKE) make_library test-port PORT=$$i; done
-
-# Helper rule for testing the z80 port only
-test-z80:
- $(MAKE) test-port PORT=z80
-
-# Helper rule for testing the z80 port only
-test-gbz80:
- $(MAKE) test-port PORT=gbz80
-
-# Helper rule for testing the mcs51 port only
-test-mcs51:
- $(MAKE) test-port PORT=mcs51
-
-test-mcs51-large:
- $(MAKE) test-port PORT=mcs51-large
-
-test-mcs51-stack-auto:
- $(MAKE) make_library test-port PORT=mcs51-stack-auto
-
-test-mcs51-xstack-auto:
- $(MAKE) make_library test-port PORT=mcs51-xstack-auto
-
-# Helper rule for testing the ds390 port only
-test-ds390:
- $(MAKE) test-port PORT=ds390
-
-# Helper rule for testing the z80 port only(use ucSim simulator)
-test-ucz80:
- $(MAKE) test-port PORT=ucz80
-
-# Helper rule for testing the hc08 port only(use ucSim simulator)
-test-hc08:
- $(MAKE) test-port PORT=hc08
-
-# Helper rule for testing the xa51 port only(use ucSim simulator)
-test-xa51:
- $(MAKE) test-port PORT=xa51
-
-### Helper rule for testing the host cc only
-test-host:
- $(MAKE) test-port PORT=host
-
-test-host2:
- $(MAKE) test-port PORT=host
-
-# Begin per-port rules
-# List of all of the known source test suites.
-ALL_TESTS = $(shell find $(TESTS_DIR) -name "*.c")
-
-# Intermediate directory
-PORT_CASES_DIR = $(CASES_DIR)/$(PORT)
-PORT_RESULTS_DIR = $(RESULTS_DIR)/$(PORT)
-# Each test generates a result log file
-PORT_RESULTS = $(ALL_TESTS:$(TESTS_DIR)/%.c=$(PORT_RESULTS_DIR)/%.out)
-
-SDCC_DIR = ../..
-SDCC_EXTRA_DIR = ../../../sdcc-extra
-INC_DIR = $(SDCC_DIR)/device/include
-
-# Defaults. Override in spec.mk if required.
-# Path to SDCC
-SDCC = $(SDCC_DIR)/bin/sdcc
-# Base flags.
-SDCCFLAGS +=
-# Extension of object intermediate files
-OBJEXT = .o
-# Extension of files that can be run in the emulator
-EXEEXT = .bin
-# Currently unused. Extension to append to intermediate directories.
-DIREXT =
-
-# Only include if we're in a per-port call.
-ifdef PORT
-include $(PORTS_DIR)/$(PORT)/spec.mk
-endif
-
-make_library: $(MAKE_LIBRARY)
-
-SDCCFLAGS += -Ifwk/include -Itests -I$(INC_DIR)
-
-# List of intermediate files to keep. Pretty much keep everything as
-# disk space is free.
-.PRECIOUS: $(PORT_CASES_DIR)/% %$(OBJEXT) %$(EXEEXT)
-
-# Rule to generate the iterations of a test suite off the soure suite.
-$(PORT_CASES_DIR)/%/iterations.stamp: $(TESTS_DIR)/%.c $(GENERATE_CASES)
- echo Processing $<
- rm -rf `dirname $@`
- mkdir -p `dirname $@`
- python $(GENERATE_CASES) $< `dirname $@` > /dev/null
- touch $@
-
-# Rule linking the combined results log to all of the files in the
-# iteration directory.
-$(PORT_RESULTS_DIR)/%.out: $(PORT_CASES_DIR)/%/iterations.stamp
- $(MAKE) iterations PORT=$(PORT) CASES=`dirname $<`
-
-# Rule to summaries the results for one port after all of the tests
-# have been run.
-port-results: port-dirs $(PORT_RESULTS)
- echo Summary for \'$(PORT)\': `cat $(PORT_RESULTS) | python collate-results.py`
-
-port-dirs:
- mkdir -p $(PORT_CASES_DIR) $(PORT_RESULTS_DIR)
-
-test-port: port-results
-
-# Begin rules that process each iteration generated from the source
-# test
-
-# List of all of the generated iteration source files.
-SUB_CASES = $(sort $(wildcard $(CASES)/*.c))
-# List of all the sub result logs generated from the iterations.
-SUB_RESULTS = $(SUB_CASES:%.c=%.out)
-# Overall target. Concatenation of all of the sub results.
-RESULTS = $(CASES:$(CASES_DIR)/%$(DIREXT)=$(RESULTS_DIR)/%.out)
-
-iterations: $(RESULTS)
-
-# Rule to generate the overall target from the sub results.
-$(RESULTS): $(SUB_RESULTS)
- cat $(SUB_RESULTS) > $@
-
-# The remainder of the rules are in $PORT/spec.mak. The port needs to
-# be able to turn an iterated test suite into a sub result, normally
-# by:
-# 1. Compile the required library files
-# 2. Compile this test suite.
-# 3. Link 1, 2, and any required stdlib into an executable.
-# 4. Run the executable inside an emulator, and capture the text
-# output into %.out.
-#
-# The emulator must exit when main() returns.
-
-# BeginGeneric rules
-
-clean:
- rm -rf $(CASES_DIR) $(RESULTS_DIR) *.pyc fwk/lib/timeout fwk/lib/timeout.exe
- for i in $(CLEAN_PORTS); do $(MAKE) -f $(PORTS_DIR)/$$i/spec.mk _clean PORTS_DIR=$(PORTS_DIR) PORT=$$i; done
projects / fw / sdcc / commitdiff