+commit 895665eefe846394926d70e4a5d51346841cb251
+Merge: 5d0a76157 36f3368a6
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Aug 5 10:37:52 2024 -0600
+
+ Merge branch 'master' into branch-1.9
+
+commit 36f3368a6dfc61e4391719559efadaac19a566fc
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Aug 2 08:58:44 2024 -0700
+
+ Version 1.9.19
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit fc66c028ff6945edf5aa99d47c21c02a89093e96
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Aug 2 08:57:39 2024 -0700
+
+ Add easymega v3.0 firmware to fat images
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3d3505186ff0eff219c3c4326288181f4f6f95e1
+Author: Keith Packard <keithp@keithp.com>
+Date: Fri Aug 2 08:53:56 2024 -0700
+
+ doc: Version 1.9.19 release notes
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit d5b471c360fc57f924e37e1d4844bb8960470d21
+Author: Bdale Garbee <bdale@gag.com>
+Date: Fri Aug 2 10:26:43 2024 -0600
+
+ capture link for EasyMini production scripts
+
+commit 44066a8c77cd3b40bba3c58a2b2e5001a8fe99bf
+Author: Bdale Garbee <bdale@gag.com>
+Date: Fri Aug 2 10:25:15 2024 -0600
+
+ production bench scripts for EasyMega v3
+
+commit e421a62342e3dde9210663d6c8b81e5ee22fe4df
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed May 29 13:54:06 2024 -0600
+
+ make EasyMini v2.1 our "current" thing to flash/cal/test
+
+commit 6f4f9015612a18406de7c80e9c4a72544fccc35e
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jul 31 13:12:04 2024 -0700
+
+ ao-accel-cal: Validate ADXL375 sensitivity
+
+ If the accel device is an ADXL375, make sure the Z axis sensitivity is
+ within the data sheet range of 18.4 to 22.6 g. Allow for rounding as the
+ device only records the integer value (sigh).
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 7da6e6eb53154a8d94513cb4ddb570949ff5d1c9
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jul 31 12:06:43 2024 -0700
+
+ src: Open up the ADXL375 self test range
+
+ Reading the datasheet more carefully, we discover that it mentions
+ that the self test magnitude can vary within a rather wide range.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 259dbc4202b8980a6983deaa7187188d5cbbca41
+Merge: 955c49611 2009090f5
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Jul 31 12:01:27 2024 -0600
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 955c49611be14868252b496fd458f2dc4ab74c2b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Jul 31 12:01:00 2024 -0600
+
+ include EasyMega v3 firmware in that captured in LLC repo during release
+
+commit 2009090f5a6eed5ecdb59ba0cd6f614f93f327bd
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat Jul 27 14:59:39 2024 -0700
+
+ ao-bringup: Re-add cal-freq
+
+ This got deleted by mistake
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 28a42c348d1ec584d0dcdb20cc6ff243aea7575c
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Jul 16 17:49:31 2024 -0600
+
+ doc: reflect move of mailing list from lists.gag.com to groups.io
+
+commit 6db5b9a1a56073d2942a36854fdcff633dfb7aa0
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Jul 16 17:44:51 2024 -0600
+
+ doc: EasyTimer v2.0 also has mag sensor
+
+commit 68f6a5c6d23658c41950ccf0c7533ea0f4cb6a04
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Jul 16 17:41:32 2024 -0600
+
+ docs: correct EasyMotor v3.0 battery in specs table
+
+commit 34fe19d319c8e178171b9d8cc0e6acbf0495c5a9
+Author: Bdale Garbee <bdale@gag.com>
+Date: Tue Jun 25 12:11:31 2024 -0600
+
+ doc: clarify how EasyMotor gets put into idle mode
+
+commit f8527ffca57c7c7dad33c5788b8a060da84280c9
+Merge: a41cae3fd 3bc1ab004
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Jun 24 09:03:17 2024 -0600
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit a41cae3fd90509d272146493dd7812e28df0f333
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Jun 24 09:02:46 2024 -0600
+
+ doc: add Terry Lee's TRA and NAR numbers to TeleLaunch doc as his request
+
+commit 3bc1ab0046c4dbebbde8557d3a1f45707aaefa42
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jun 20 15:35:38 2024 -0700
+
+ altoslib: Check for negative tick wrap when importing flight records
+
+ If the tick count wraps just as boost is detected, there may be some
+ data records on the device with large tick values which are recorded
+ after the AO_FLIGHT record. Check for these in two places which manage
+ 16-bit tick values by wrapping tick values to negative numbers in
+ those cases.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 3e2cadd282479e21ce74f80e4fe844f65db16bab
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Jun 20 15:34:44 2024 -0700
+
+ altosui: Don't add pyro table to graph UI when npyro == MISSING
+
+ For some reason, npyro is set to MISSING in some flight records. Check
+ for that before adding pyro info.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit ff6116f1a65a1a623a5b00759e5b922c3f482278
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Jun 19 23:02:30 2024 -0700
+
+ telelco-v3.0: Support ambient light sensor
+
+ A TEPT5700 ALS and 15k resistor from 3.3V to ground hooked to ADC10 on
+ PC0.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 18f3c100b7073bd9aeaedfacc25324a7771b0723
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 11 20:53:25 2024 -0700
+
+ altos/telelco-v3.0: Merge info into one screen
+
+ Move all of the info bits from separate screens to a single
+ screen. Eliminate the contrast screen, plan on eliminating the
+ backlight screen once we've switched to an ALS.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 14f82893c918d224f28a79211840a5523684fedc
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Jun 11 16:26:16 2024 -0700
+
+ altos/telelco-v3.0: Swap version and serial on info page
+
+ Rationale is that model and sn are part of the hardware, version is
+ fw, call and freq are config.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 04469f35a791b34b95145e222384f0a4661f10e4
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 10 14:31:11 2024 -0700
+
+ altos/telelco-v3.0: Display good vs bad packets received
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 934301ca378192aecbaacf345cdb76a4d96c269d
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 10 13:47:41 2024 -0700
+
+ altos/telelco-v3.0: Add "Scanning..." to startup screen
+
+ Make it clear what's going on. Had to shrink the logo to make room, so
+ switched from 26 to 24 point text.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 45bcdbdb5c4709646416857c5db7e7f29780b674
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 10 13:37:47 2024 -0700
+
+ altos/telelco-v3.0: Delete debug code
+
+ Remove the display debugging code which is no longer used.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1200e0c549c4b7e3b40d270879af4180cdd5f689
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon Jun 10 13:31:05 2024 -0700
+
+ src/telelco-v3.0: Increase LED test time to 1 second
+
+ Make it possible to verify all LEDs active during testing.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit bf1e38a6f085c630cf56c3da44fc6d4eb232e373
+Author: Keith Packard <keithp@keithp.com>
+Date: Mon May 20 21:22:33 2024 -0700
+
+ altos/easymega-v3.0: Add combined dfu and ihx targets
+
+ Build these for testing the boards at Seeed
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 2830a47f142e79b8e4435f3957f19c7858606cd9
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat May 11 19:03:51 2024 -0700
+
+ altosui: Add config and pyro tabs to graph widget
+
+ Show the flight computer configuration in the graph when available.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 407086a6b36032f0c780d3b3e94101fa96a1c900
+Author: Keith Packard <keithp@keithp.com>
+Date: Sat May 11 17:52:20 2024 -0700
+
+ altos/test: Get the flight software test code working again
+
+ This had gotten very stale; much hacking was required. I know the
+ TeleMega v4 code works, other things "might". At least it seems to
+ build without errors?
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit db58d8c58fd6dcb4d153d85e3fd37d59956c84db
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Apr 29 11:41:48 2024 -0600
+
+ first cut at turnon scripts for EasyTimer v2
+
+commit 0d8c2354e7c4f7d2671e6c0a0d088fd94de75c46
+Author: Bdale Garbee <bdale@gag.com>
+Date: Mon Apr 29 11:20:53 2024 -0600
+
+ remove garbage line from easymotor turnon script
+
+commit 5de98063f8e638e18ea0f05f09e31e435dfd7d0a
+Author: Keith Packard <keithp@keithp.com>
+Date: Sun Apr 28 21:19:58 2024 -0700
+
+ altos/easymini-v2.0: Remove combined .dfu file
+
+ This is delivered to seeed for testing the hardware.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 673d326fd861672feaee7c903486e54e8de9471d
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Apr 28 20:44:55 2024 -0600
+
+ capture things learned during 1.9.18 release
+
+commit 5d0a76157ae14b6cc8ff9236db4960dc475905db
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sun Apr 28 19:40:41 2024 -0600
+
+ update ChangeLog for 1.9.18 release
+