tcl: replace the deprecated commands with "adapter ..."

[fw/openocd] / tcl / tools / firmware-recovery.tcl

diff --git a/tcl/tools/firmware-recovery.tcl b/tcl/tools/firmware-recovery.tcl
index 8e017ce5b3cf55d04af4b7c3f2595b5728e918ac..8b28656aaeeb8dd661aa2a78c1ea8c1b5bc576c3 100644 (file)
--- a/tcl/tools/firmware-recovery.tcl
+++ b/tcl/tools/firmware-recovery.tcl
@@ -29,7 +29,7 @@ dump_part <name> <filename>   save partition's contents to a file
 erase_part <name>              erase the given partition
 flash_part <name> <filename>   erase, flash and verify the given partition
 ram_boot <filename>            load binary file to RAM and run it
-adapter_khz <freq>             set JTAG clock frequency in kHz
+adapter speed <freq>           set JTAG clock frequency in kHz
 
 For example, to clear nvram and reflash CFE on an RT-N16 using TUMPA, run:
 openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
@@ -39,7 +39,7 @@ openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
 }
 
 # set default, can be overriden later
-adapter_khz 1000
+adapter speed 1000
 
 proc get_partition { name } {
     global partition_list