tcl: replace the deprecated commands with "adapter ..."

[fw/openocd] / tcl / board / at91rm9200-ek.cfg

diff --git a/tcl/board/at91rm9200-ek.cfg b/tcl/board/at91rm9200-ek.cfg
index a3f253a26c602edbcfa17ca36b2537e05fd9d7ea..958bc9d5189510660105920031288d6543064d3f 100644 (file)
--- a/tcl/board/at91rm9200-ek.cfg
+++ b/tcl/board/at91rm9200-ek.cfg
@@ -19,12 +19,12 @@ set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
 
 # The chip may run @ 32khz, so set a really low JTAG speed
-adapter_khz 8
+adapter speed 8
 
 proc at91rm9200_ek_init { } {
        # Try to run at 1khz... Yea, that slow!
        # Chip is really running @ 32khz
-       adapter_khz 8
+       adapter speed 8
 
        mww 0xfffffc64 0xffffffff
        ## disable all clocks but system clock
@@ -61,7 +61,7 @@ proc at91rm9200_ek_init { } {
        #========================================
        # CPU now runs at 180mhz
        # SYS runs at 60mhz.
-       adapter_khz 40000
+       adapter speed 40000
        #========================================
 
        ## Init SDRAM