update load cell channel based on repaired board and 1T load cell
[fw/altos] / src / telemini-v2.0 / ao_pins.h
diff --git a/src/telemini-v2.0/ao_pins.h b/src/telemini-v2.0/ao_pins.h
deleted file mode 100644 (file)
index fad029e..0000000
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright © 2010 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-#define HAS_RADIO      1
-
-#define HAS_FLIGHT             1
-#define HAS_USB                        1
-#define USB_FORCE_FLIGHT_IDLE  1
-#define HAS_BEEP               1
-#define HAS_GPS                        0
-#define HAS_SERIAL_1           0
-#define HAS_EEPROM             1
-#define HAS_LOG                        1
-#define USE_INTERNAL_FLASH     0
-#define HAS_DBG                        0
-#define PACKET_HAS_SLAVE       1
-#define USE_FAST_ASCENT_LOG    1
-
-#define AO_LED_GREEN           1
-#define AO_LED_RED             2
-#define LEDS_AVAILABLE         (AO_LED_RED|AO_LED_GREEN)
-#define HAS_EXTERNAL_TEMP      0
-#define HAS_ACCEL              0
-#define HAS_IGNITE             1
-#define HAS_IGNITE_REPORT 1
-#define HAS_MONITOR            0
-
-/*
- * SPI
- */
-
-#define SPI_CS_PORT            P1
-#define SPI_CS_SEL             P1SEL
-#define SPI_CS_DIR             P1DIR
-
-/*
- * Flash
- */
-#define AO_M25_SPI_CS_PORT     SPI_CS_PORT
-#define AO_M25_SPI_CS_MASK     0x04    /* cs_flash is P1_2 */
-#define M25_MAX_CHIPS          1
-
-/*
- * MS5607
- */
-
-#define HAS_MS5607             1
-#define HAS_MS5611             0
-#define AO_MS5607_PRIVATE_PINS 0
-#define AO_MS5607_CS_PORT      P1
-#define AO_MS5607_CS_PIN       3
-#define AO_MS5607_CS           P1_3
-#define AO_MS5607_CS_MASK      (1 << AO_MS5607_CS_PIN)
-#define AO_MS5607_MISO_PORT    P0
-#define AO_MS5607_MISO_PIN     2
-#define AO_MS5607_MISO_MASK    (1 << AO_MS5607_MISO_PIN)
-#define AO_MS5607_SPI_INDEX    0
-
-/*
- * Igniters
- */
-#define AO_IGNITER_PORT                P2
-#define AO_IGNITER_DROGUE_PORT AO_IGNITER_PORT
-#define AO_IGNITER_DROGUE      P2_3
-#define AO_IGNITER_MAIN                P2_4
-#define AO_IGNITER_DIR         P2DIR
-#define AO_IGNITER_DROGUE_BIT  (1 << 3)
-#define AO_IGNITER_MAIN_BIT    (1 << 4)
-#define AO_IGNITER_DROGUE_PIN  3
-#define AO_IGNITER_MAIN_PIN    4
-
-#define AO_IGNITER_DROGUE_PORT AO_IGNITER_PORT
-#define AO_IGNITER_MAIN_PORT   AO_IGNITER_PORT
-
-/* test these values with real igniters */
-#define AO_IGNITER_OPEN                1000
-#define AO_IGNITER_CLOSED      7000
-#define AO_IGNITER_FIRE_TIME   AO_MS_TO_TICKS(50)
-#define AO_IGNITER_CHARGE_TIME AO_MS_TO_TICKS(2000)
-
-#define AO_SEND_MINI
-
-/*
- * ADC
- */
-
-#define HAS_ADC                        1
-#define AO_ADC_FIRST_PIN       0
-
-struct ao_adc {
-       int16_t         sense_a;        /* apogee continuity sense */
-       int16_t         sense_m;        /* main continuity sense */
-       int16_t         v_batt;         /* battery voltage */
-};
-
-#define ao_data_count  ao_adc_count
-
-#define AO_SENSE_DROGUE(p)     ((p)->adc.sense_a)
-#define AO_SENSE_MAIN(p)       ((p)->adc.sense_m)
-
-#define AO_NUM_TASKS   10
-
-#define AO_ADC_DUMP(p) \
-       printf("tick: %5u apogee: %5d main: %5d batt: %5d\n", \
-              (p)->tick, (p)->adc.sense_a, (p)->adc.sense_m, (p)->adc.v_batt)
-
-#define FETCH_ADC()                                                    \
-       a = (uint8_t __xdata *) (&ao_data_ring[ao_data_head].adc);      \
-       switch (sequence) {                                             \
-       case 4:                                                         \
-               a += 4;                                                 \
-               sequence = 0;                                           \
-               break;                                                  \
-       case 1:                                                         \
-               a += 2;                                                 \
-               sequence = 4;                                           \
-               break;                                                  \
-       case 0:                                                         \
-               sequence = 1;                                           \
-               break;                                                  \
-       }                                                               \
-       if (sequence)                                                   \
-               ;
-
-#endif /* _AO_PINS_H_ */