*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
-#define HAS_TASK_QUEUE 1
/* 8MHz High speed external crystal */
#define AO_HSE 8000000
#define ao_gps_set_speed ao_serial2_set_speed
#define ao_gps_fifo (ao_stm_usart2.rx_fifo)
-#define HAS_EEPROM 0
+#define HAS_EEPROM 1
#define USE_INTERNAL_FLASH 0
+#define USE_EEPROM_CONFIG 1
+#define USE_STORAGE_CONFIG 0
+
#define HAS_USB 1
#define HAS_BEEP 0
-#define HAS_RADIO 0
-#define HAS_TELEMETRY 0
+#define HAS_RADIO 1
+#define HAS_TELEMETRY 1
+#define HAS_APRS 1
+#define HAS_RADIO_RECV 0
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0
+#define HAS_SPI_1 1
+#define SPI_1_PA5_PA6_PA7 1 /* SD card */
#define SPI_1_PB3_PB4_PB5 0
#define SPI_1_PE13_PE14_PE15 0
+#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz
+
+#define SPI_1_PORT (&stm_gpioa)
+#define SPI_1_SCK_PIN 5
+#define SPI_1_MISO_PIN 6
+#define SPI_1_MOSI_PIN 7
#define HAS_SPI_2 1
#define SPI_2_PB13_PB14_PB15 1 /* CC115L */
#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN)
-#define HAS_GPS 0
+#define HAS_GPS 1
#define HAS_FLIGHT 0
#define HAS_ADC 0
#define HAS_LOG 0
#define AO_RADIO_CAL_DEFAULT 0x10b6a5
+#define HAS_RADIO_POWER 1
+
#define AO_FEC_DEBUG 0
#define AO_CC115L_SPI_CS_PORT (&stm_gpiob)
#define AO_CC115L_SPI_CS_PIN 12
#define AO_CC115L_SPI_BUS AO_SPI_2_PB13_PB14_PB15
#define AO_CC115L_SPI stm_spi2
-#define AO_CC115L_INT_PORT (&stm_gpioa)
-#define AO_CC115L_INT_PIN (9)
+#define AO_CC115L_FIFO_INT_GPIO_IOCFG CC115L_IOCFG2
+#define AO_CC115L_FIFO_INT_PORT (&stm_gpioa)
+#define AO_CC115L_FIFO_INT_PIN (9)
-#define AO_CC115L_MCU_WAKEUP_PORT (&stm_gpioa)
-#define AO_CC115L_MCU_WAKEUP_PIN (10)
+#define AO_CC115L_DONE_INT_GPIO_IOCFG CC115L_IOCFG0
+#define AO_CC115L_DONE_INT_PORT (&stm_gpioa)
+#define AO_CC115L_DONE_INT_PIN (10)
-#define AO_CC115L_INT_GPIO 2
-#define AO_CC115L_INT_GPIO_IOCFG CC115L_IOCFG2
+#define HAS_RADIO_AMP 1
-#define AO_CC115L_MARC_GPIO 0
-#define AO_CC115L_MARC_GPIO_IOCFG CC115L_IOCFG0
+/*
+ * Power amplifier (RFPA0133)
+ */
+
+#define AO_PA_POWER_GPIO (&stm_gpiob)
+#define AO_PA_POWER_PIN 1
+#define AO_PA_GAIN_8_GPIO (&stm_gpiob)
+#define AO_PA_GAIN_8_PIN 10
+#define AO_PA_GAIN_16_GPIO (&stm_gpiob)
+#define AO_PA_GAIN_16_PIN 11
+
+/*
+ * SD card
+ */
+#define AO_SDCARD_SPI_BUS AO_SPI_1_PA5_PA6_PA7
+#define AO_SDCARD_SPI_PORT SPI_1_PORT
+#define AO_SDCARD_SPI_SCK_PIN SPI_1_SCK_PIN
+#define AO_SDCARD_SPI_MISO_PIN SPI_1_MISO_PIN
+#define AO_SDCARD_SPI_MOSI_PIN SPI_1_MOSI_PIN
+#define AO_SDCARD_SPI_CS_PORT (&stm_gpioa)
+#define AO_SDCARD_SPI_CS_PIN 4
+#define AO_SDCARD_SPI stm_spi1
+
+#define SDCARD_DEBUG 1
+#define SDCARD_WARN 1
+#define SDCARD_TRACE 1
#endif /* _AO_PINS_H_ */