#define ao_gps_set_speed ao_serial2_set_speed
#define ao_gps_fifo (ao_stm_usart2.rx_fifo)
-#define HAS_EEPROM 0
-#define USE_INTERNAL_FLASH 0
+#define HAS_EEPROM 1
+#define USE_INTERNAL_FLASH 1
#define HAS_USB 1
#define HAS_BEEP 0
-#define HAS_RADIO 0
-#define HAS_TELEMETRY 0
+#define HAS_RADIO 1
+#define HAS_TELEMETRY 1
+#define HAS_APRS 1
+#define HAS_RADIO_RECV 0
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0
+#define HAS_SPI_1 1
+#define SPI_1_PA5_PA6_PA7 1 /* SD card */
#define SPI_1_PB3_PB4_PB5 0
#define SPI_1_PE13_PE14_PE15 0
+#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz
#define HAS_SPI_2 1
#define SPI_2_PB13_PB14_PB15 1 /* CC115L */
#define LEDS_AVAILABLE (AO_LED_RED | AO_LED_GREEN)
-#define HAS_GPS 0
+#define HAS_GPS 1
#define HAS_FLIGHT 0
#define HAS_ADC 0
#define HAS_LOG 0
#define AO_CC115L_MARC_GPIO 0
#define AO_CC115L_MARC_GPIO_IOCFG CC115L_IOCFG0
+#define AO_RADIO_HAS_PA 1
+
+/*
+ * Power amplifier (RFPA0133)
+ */
+
+#define AO_PA_POWER_GPIO (&stm_gpiob)
+#define AO_PA_POWER_PIN 1
+#define AO_PA_GAIN_8_GPIO (&stm_gpiob)
+#define AO_PA_GAIN_8_PIN 10
+#define AO_PA_GAIN_16_GPIO (&stm_gpiob)
+#define AO_PA_GAIN_16_PIN 11
+
+/*
+ * SD card
+ */
+
+#define AO_SDCARD_SPI_BUS AO_SPI_1_PA5_PA6_PA7
+#define AO_SDCARD_SPI_CS_PORT (&stm_gpioa)
+#define AO_SDCARD_SPI_CS_PIN 4
+#define AO_SDCARD_SPI stm_spi1
#endif /* _AO_PINS_H_ */