/*
- * Copyright © 2010 Keith Packard <keithp@keithp.com>
+ * Copyright © 2019 Keith Packard <keithp@keithp.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define HAS_FLIGHT 0
#define HAS_USB 1
#define HAS_BEEP 0
-#define BEEPER_TIMER 3
-#define BEEPER_CHANNEL 1
-#define BEEPER_PORT (&stm_gpioc)
-#define BEEPER_PIN 6
#define HAS_GPS 0
#define HAS_SERIAL_1 0
#define HAS_ADC 1
#define HAS_LOG 0
#define HAS_PAD 1
#define USE_INTERNAL_FLASH 1
-#define IGNITE_ON_P0 0
-#define PACKET_HAS_MASTER 0
-#define PACKET_HAS_SLAVE 0
#define AO_DATA_RING 32
#define USE_EEPROM_CONFIG 1
#define USE_STORAGE_CONFIG 0
#define SPI_1_PB3_PB4_PB5 0
#define SPI_1_PE13_PE14_PE15 1
#define SPI_1_GPIO (&stm_gpioe)
-#define SPI_1_SCK 13
-#define SPI_1_MISO 14
-#define SPI_1_MOSI 15
#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz
#define HAS_SPI_2 0
#define HAS_I2C_2 0
-#define PACKET_HAS_SLAVE 0
-#define PACKET_HAS_MASTER 0
-
-#define FAST_TIMER_FREQ 10000 /* .1ms for debouncing */
-
/*
* Radio is a cc1200 connected via SPI
*/
#define AO_CC1200_SPI_CS_PIN 11
#define AO_CC1200_SPI_BUS AO_SPI_1_PE13_PE14_PE15
#define AO_CC1200_SPI stm_spi1
-#define AO_CC1200_SPI_SPEED AO_SPI_SPEED_FAST
#define AO_CC1200_INT_PORT (&stm_gpioe)
#define AO_CC1200_INT_PIN (12)
#define LED_8_PORT (&stm_gpioe)
#define LED_8_PIN 3
-#define LED_PIN_ARMED 8
+#define AO_LED_ARMED AO_LED_8
/* RF good/marginal/poor */
#define LED_9_PORT (&stm_gpioe)
#define LED_11_PORT (&stm_gpioe)
#define LED_11_PIN 6
-#define AO_LED_ARMED AO_LED_8
#define AO_LED_GREEN AO_LED_9
#define AO_LED_AMBER AO_LED_10
#define AO_LED_RED AO_LED_11
};
#define AO_ADC_DUMP(p) \
- printf ("tick: %5u " \
+ printf ("tick: %5lu " \
"0: %5d 1: %5d 2: %5d 3: %5d " \
"4: %5d 5: %5d 6: %5d 7: %5d " \
"pyro: %5d batt: %5d\n", \