#ifndef _AO_PINS_H_
#define _AO_PINS_H_
-#define HAS_TASK_QUEUE 1
-
-/* 8MHz High speed external crystal */
-#define AO_HSE 8000000
-
-/* PLLVCO = 96MHz (so that USB will work) */
-#define AO_PLLMUL 12
-#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
-
-/* SYSCLK = 32MHz (no need to go faster than CPU) */
-#define AO_PLLDIV 3
-#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
-
-/* HCLK = 32MHz (CPU clock) */
-#define AO_AHB_PRESCALER 1
-#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+#define AO_STACK_SIZE 324
-/* Run APB1 at 16MHz (HCLK/2) */
-#define AO_APB1_PRESCALER 2
-#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
+#define HAS_TASK_QUEUE 1
-/* Run APB2 at 16MHz (HCLK/2) */
-#define AO_APB2_PRESCALER 2
-#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
+#define IS_FLASH_LOADER 0
-#define HAS_SERIAL_1 0
-#define USE_SERIAL_1_STDIN 0
-#define SERIAL_1_PB6_PB7 0
-#define SERIAL_1_PA9_PA10 0
+/* Crystal on the board */
+#define AO_LPC_CLKIN 12000000
-#define HAS_SERIAL_2 0
-#define USE_SERIAL_2_STDIN 0
-#define SERIAL_2_PA2_PA3 0
-#define SERIAL_2_PD5_PD6 0
+/* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
+#define AO_LPC_CLKOUT 48000000
-#define HAS_SERIAL_3 0
-#define USE_SERIAL_3_STDIN 0
-#define SERIAL_3_PB10_PB11 0
-#define SERIAL_3_PC10_PC11 0
-#define SERIAL_3_PD8_PD9 0
+/* System clock frequency */
+#define AO_LPC_SYSCLK 24000000
-#define HAS_EEPROM 1
-#define USE_INTERNAL_FLASH 1
+#define HAS_EEPROM 0
+#define USE_INTERNAL_FLASH 0
#define USE_STORAGE_CONFIG 0
-#define USE_EEPROM_CONFIG 1
+#define USE_EEPROM_CONFIG 0
+
#define HAS_USB 1
+#define HAS_USB_CONNECT 0
+#define HAS_USB_VBUS 0
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT 0
+#define AO_USB_PULLUP_PIN 20
+
#define HAS_BEEP 0
#define HAS_RADIO 1
#define HAS_TELEMETRY 0
-#define HAS_RSSI 1
-
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0 /* Barometer */
-#define SPI_1_PB3_PB4_PB5 0
-#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
-
-#define HAS_SPI_2 1
-#define SPI_2_PB13_PB14_PB15 1 /* Radio */
-#define SPI_2_PD1_PD3_PD4 0
-#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
+#define HAS_RSSI 0
-#define SPI_2_PORT (&stm_gpiob)
-#define SPI_2_SCK_PIN 13
-#define SPI_2_MISO_PIN 14
-#define SPI_2_MOSI_PIN 15
+#define HAS_SPI_0 1
+#define SPI_SCK0_P0_6 1
#define PACKET_HAS_SLAVE 0
#define PACKET_HAS_MASTER 1
#define LOW_LEVEL_DEBUG 0
-#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT_0 (&stm_gpioc)
-#define LED_PORT_0_MASK (0xffff)
-#define LED_PORT_0_SHIFT 0
-#define LED_PIN_RED 8
-#define LED_PIN_GREEN 9
+#define LED_PORT 0
+#define LED_PIN_RED 14
+#define LED_PIN_GREEN 7
#define AO_LED_RED (1 << LED_PIN_RED)
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define LEGACY_MONITOR 0
#define HAS_MONITOR_PUT 1
#define AO_MONITOR_LED AO_LED_GREEN
+#define AO_MONITOR_BAD AO_LED_RED
/*
* Radio (cc1200)
#define AO_RADIO_CAL_DEFAULT 5695733
#define AO_FEC_DEBUG 0
-#define AO_CC1200_SPI_CS_PORT (&stm_gpioc)
-#define AO_CC1200_SPI_CS_PIN 5
-#define AO_CC1200_SPI_BUS AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1200_SPI stm_spi2
+#define AO_CC1200_SPI_CS_PORT 0
+#define AO_CC1200_SPI_CS_PIN 3
+#define AO_CC1200_SPI_BUS 0
+#define AO_CC1200_SPI 0
-#define AO_CC1200_INT_PORT (&stm_gpioe)
-#define AO_CC1200_INT_PIN 1
+#define AO_CC1200_INT_PORT 0
+#define AO_CC1200_INT_PIN 2
#define AO_CC1200_INT_GPIO 2
#define AO_CC1200_INT_GPIO_IOCFG CC1200_IOCFG2