#include "ao.h"
#include "ao_usb.h"
#include "ao_product.h"
+#include "ao_power.h"
#define USB_DEBUG 0
+#define USB_STATUS 0
#define USB_DEBUG_DATA 0
#define USB_ECHO 0
#error "must define AO_PA11_PA12_RMP"
#endif
+#ifndef AO_POWER_MANAGEMENT
+#define AO_POWER_MANAGEMENT 0
+#endif
+
#ifndef USE_USB_STDIO
#define USE_USB_STDIO 1
#endif
uint8_t ao_usb_running;
static uint8_t ao_usb_configuration;
-#define AO_USB_EP0_GOT_RESET 1
-#define AO_USB_EP0_GOT_SETUP 2
-#define AO_USB_EP0_GOT_RX_DATA 4
-#define AO_USB_EP0_GOT_TX_ACK 8
+#define AO_USB_EP0_GOT_SETUP 1
+#define AO_USB_EP0_GOT_RX_DATA 2
+#define AO_USB_EP0_GOT_TX_ACK 4
static uint8_t ao_usb_ep0_receive;
static uint8_t ao_usb_address;
{
debug ("ao_usb_set_configuration\n");
+#if AO_USB_HAS_INT
/* Set up the INT end point */
ao_usb_bdt[AO_USB_INT_EPR].single.addr_tx = ao_usb_int_tx_offset;
ao_usb_bdt[AO_USB_INT_EPR].single.count_tx = 0;
STM_USB_EPR_EP_TYPE_INTERRUPT,
STM_USB_EPR_STAT_RX_DISABLED,
STM_USB_EPR_STAT_TX_NAK);
+#endif
+#if AO_USB_HAS_OUT
/* Set up the OUT end point */
ao_usb_bdt[AO_USB_OUT_EPR].single.addr_rx = ao_usb_out_rx_offset;
ao_usb_bdt[AO_USB_OUT_EPR].single.count_rx = ((1 << STM_USB_BDT_COUNT_RX_BL_SIZE) |
STM_USB_EPR_EP_TYPE_BULK,
STM_USB_EPR_STAT_RX_VALID,
STM_USB_EPR_STAT_TX_DISABLED);
+#endif
+#if AO_USB_HAS_IN
/* Set up the IN end point */
ao_usb_bdt[AO_USB_IN_EPR].single.addr_tx = ao_usb_in_tx_offset;
ao_usb_bdt[AO_USB_IN_EPR].single.count_tx = 0;
STM_USB_EPR_EP_TYPE_BULK,
STM_USB_EPR_STAT_RX_DISABLED,
STM_USB_EPR_STAT_TX_NAK);
+#endif
ao_usb_running = 1;
#if AO_USB_DIRECTIO
ao_usb_ep0_handle(uint8_t receive)
{
ao_usb_ep0_receive = 0;
- if (receive & AO_USB_EP0_GOT_RESET) {
- debug ("\treset\n");
- ao_usb_set_ep0();
- return;
- }
if (receive & AO_USB_EP0_GOT_SETUP) {
debug ("\tsetup\n");
ao_usb_ep0_setup();
}
}
+#if AO_POWER_MANAGEMENT
+void
+ao_usb_suspend(void)
+{
+ stm_usb.cntr |= (1 << STM_USB_CNTR_FSUSP);
+ ao_power_suspend();
+ stm_usb.cntr |= (1 << STM_USB_CNTR_LP_MODE);
+ ao_clock_suspend();
+}
+
+void
+ao_usb_wakeup(void)
+{
+ ao_clock_resume();
+ stm_usb.cntr &= ~(1 << STM_USB_CNTR_FSUSP);
+ ao_power_resume();
+}
+#endif
+
void
stm_usb_isr(void)
{
if (istr & (1 << STM_USB_ISTR_RESET)) {
++reset_count;
- ao_usb_ep0_receive |= AO_USB_EP0_GOT_RESET;
- ao_usb_ep0_handle(ao_usb_ep0_receive);
+ debug ("\treset\n");
+ ao_usb_set_ep0();
}
-
+#if AO_POWER_MANAGEMENT
+ if (istr & (1 << STM_USB_ISTR_SUSP)) {
+ debug ("\tsuspend\n");
+ ao_usb_suspend();
+ }
+ if (istr & (1 << STM_USB_ISTR_WKUP)) {
+ debug ("\twakeup\n");
+ ao_usb_wakeup();
+ }
+#endif
}
/* Queue the current IN buffer for transmission */
stm_usb.cntr = ((1 << STM_USB_CNTR_CTRM) |
(0 << STM_USB_CNTR_PMAOVRM) |
(0 << STM_USB_CNTR_ERRM) |
- (0 << STM_USB_CNTR_WKUPM) |
- (0 << STM_USB_CNTR_SUSPM) |
+ (AO_POWER_MANAGEMENT << STM_USB_CNTR_WKUPM) |
+ (AO_POWER_MANAGEMENT << STM_USB_CNTR_SUSPM) |
(1 << STM_USB_CNTR_RESETM) |
(0 << STM_USB_CNTR_SOFM) |
(0 << STM_USB_CNTR_ESOFM) |
}
#endif
-#if USB_DEBUG
+#if USB_STATUS
static void
ao_usb_irq(void)
{
#if USB_ECHO
ao_add_task(&ao_usb_echo_task, ao_usb_echo, "usb echo");
#endif
-#if USB_DEBUG
+#if USB_STATUS
ao_cmd_register(&ao_usb_cmds[0]);
#endif
#if !USB_ECHO