#ifndef _AO_PINS_H_
#define _AO_PINS_H_
+/* Bridge SB17 on the board and use the MCO from the other chip */
+#define AO_HSE 8000000
+#define AO_HSE_BYPASS 1
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL 12
+#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
+
+/* SYSCLK = 32MHz */
+#define AO_PLLDIV 3
+#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHZ (CPU clock) */
+#define AO_AHB_PRESCALER 1
+#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at HCLK/1 */
+#define AO_APB1_PRESCALER 1
+#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_1
+
+/* Run APB2 at HCLK/1 */
+#define AO_APB2_PRESCALER 1
+#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_1
+
#define HAS_SERIAL_1 1
+#define USE_SERIAL_1_STDIN 1
+#define SERIAL_1_PB6_PB7 1
+#define SERIAL_1_PA9_PA10 0
+
#define HAS_SERIAL_2 0
+#define USE_SERIAL_2_STDIN 1
+#define SERIAL_2_PA2_PA3 0
+#define SERIAL_2_PD5_PD6 1
+
#define HAS_SERIAL_3 0
-#define USE_SERIAL_STDIN 1
-#define HAS_USB 0
+#define USE_SERIAL_3_STDIN 1
+#define SERIAL_3_PB10_PB11 0
+#define SERIAL_3_PC10_PC11 0
+#define SERIAL_3_PD8_PD9 1
+
+#define HAS_SPI_1 1
+#define SPI_1_PB3_PB4_PB5 1
+
+#define HAS_SPI_2 0
+
+#define HAS_USB 1
#define HAS_BEEP 0
#define PACKET_HAS_SLAVE 0
#define AO_LCD_28_ON_C 1
+#define HAS_ADC 1
+
+#define AO_ADC_RING 32
+
+struct ao_adc {
+ uint16_t tick;
+ int16_t idd;
+ int16_t temp;
+ int16_t vref;
+};
+
+#define AO_ADC_IDD 4
+#define AO_ADC_PIN0_PORT stm_gpioa
+#define AO_ADC_PIN0_PIN 4
+
+#define AO_ADC_RCC_AHBENR ((1 << STM_RCC_AHBENR_GPIOAEN))
+#define AO_ADC_TEMP 16
+#define AO_ADC_VREF 17
+
+#define HAS_ADC_TEMP 1
+
+#define AO_DATA_RING 32
+#define AO_NUM_ADC 3
+
+#define AO_ADC_SQ1 AO_ADC_IDD
+#define AO_ADC_SQ2 AO_ADC_TEMP
+#define AO_ADC_SQ3 AO_ADC_VREF
+
+#define HAS_I2C_1 1
+#define I2C_1_PB6_PB7 0
+#define I2C_1_PB8_PB9 1
+
+#define HAS_I2C_2 0
+#define I2C_2_PB10_PB11 0
+
#endif /* _AO_PINS_H_ */