*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
-#define HAS_SERIAL_1 1
+/* Bridge SB17 on the board and use the MCO from the other chip */
+#define AO_HSE 8000000
+#define AO_HSE_BYPASS 1
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL 12
+#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
+
+/* SYSCLK = 32MHz */
+#define AO_PLLDIV 3
+#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHZ (CPU clock) */
+#define AO_AHB_PRESCALER 1
+#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at HCLK/1 */
+#define AO_APB1_PRESCALER 1
+#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_1
+
+/* Run APB2 at HCLK/1 */
+#define AO_APB2_PRESCALER 1
+#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_1
+
+#define HAS_SERIAL_1 0
+#define USE_SERIAL_1_STDIN 0
+#define SERIAL_1_PB6_PB7 1
+#define SERIAL_1_PA9_PA10 0
+
#define HAS_SERIAL_2 0
+#define USE_SERIAL_2_STDIN 0
+#define SERIAL_2_PA2_PA3 0
+#define SERIAL_2_PD5_PD6 1
+
#define HAS_SERIAL_3 0
-#define USE_SERIAL_STDIN 1
-#define HAS_USB 0
+#define USE_SERIAL_3_STDIN 1
+#define SERIAL_3_PB10_PB11 0
+#define SERIAL_3_PC10_PC11 0
+#define SERIAL_3_PD8_PD9 1
+
+#define HAS_SPI_1 0
+#define SPI_1_PB3_PB4_PB5 1
+#define SPI_1_OSPEEDR STM_OSPEEDR_10MHz
+
+#define HAS_SPI_2 1
+#define SPI_2_PB13_PB14_PB15 1 /* Flash, Companion, Radio */
+#define SPI_2_PD1_PD3_PD4 0
+#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
+
+#define HAS_USB 1
#define HAS_BEEP 0
#define PACKET_HAS_SLAVE 0
-#define LOW_LEVEL_DEBUG 1
+#define AO_BOOT_CHAIN 1
+
+#define LOW_LEVEL_DEBUG 0
#define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOBEN
-#define LED_PORT stm_gpiob
+#define LED_PORT (&stm_gpiob)
#define LED_PIN_GREEN 7
#define LED_PIN_BLUE 6
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define AO_LED_BLUE (1 << LED_PIN_BLUE)
-
-#define AO_LED_RED AO_LED_BLUE /* a patent lie */
+#define AO_LED_PANIC AO_LED_BLUE
#define LEDS_AVAILABLE (AO_LED_BLUE | AO_LED_GREEN)
#define AO_LCD_28_ON_C 1
+#define AO_LCD_DUTY STM_LCD_CR_DUTY_STATIC
+
+#define HAS_ADC 1
+
+#define AO_ADC_RING 32
+
+struct ao_adc {
+ AO_TICK_TYPE tick;
+ int16_t idd;
+ int16_t temp;
+ int16_t vref;
+};
+
+#define AO_ADC_IDD 4
+#define AO_ADC_PIN0_PORT (&stm_gpioa)
+#define AO_ADC_PIN0_PIN 4
+
+#define AO_ADC_RCC_AHBENR ((1 << STM_RCC_AHBENR_GPIOAEN))
+#define AO_ADC_TEMP 16
+#define AO_ADC_VREF 17
+
+#define HAS_ADC_TEMP 1
+
+#define AO_DATA_RING 32
+#define AO_NUM_ADC 3
+
+#define AO_ADC_SQ1 AO_ADC_IDD
+#define AO_ADC_SQ2 AO_ADC_TEMP
+#define AO_ADC_SQ3 AO_ADC_VREF
+
+#define HAS_I2C_1 1
+#define I2C_1_PB6_PB7 0
+#define I2C_1_PB8_PB9 1
+
+#define HAS_I2C_2 0
+#define I2C_2_PB10_PB11 0
+
+#define AO_EVENT 1
+
+#define AO_QUADRATURE_COUNT 2
+#define AO_QUADRATURE_MODE AO_EXTI_MODE_PULL_UP
+
+#define AO_QUADRATURE_0_PORT &stm_gpioc
+#define AO_QUADRATURE_0_A 1
+#define AO_QUADRATURE_0_B 0
+
+#define AO_QUADRATURE_1_PORT &stm_gpioc
+#define AO_QUADRATURE_1_A 3
+#define AO_QUADRATURE_1_B 2
+
+#define AO_BUTTON_COUNT 2
+#define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP
+
+#define AO_BUTTON_0_PORT &stm_gpioc
+#define AO_BUTTON_0 6
+
+#define AO_BUTTON_1_PORT &stm_gpioc
+#define AO_BUTTON_1 7
+
+#define AO_TICK_TYPE uint32_t
+#define AO_TICK_SIGNED int32_t
+
+#define M25_MAX_CHIPS 1
+#define AO_M25_SPI_CS_PORT (&stm_gpiob)
+#define AO_M25_SPI_CS_MASK (1 << 12)
+#define AO_M25_SPI_BUS AO_SPI_2_PB13_PB14_PB15
+
+#define AO_LOG_FORMAT AO_LOG_FORMAT_TELEMEGA
+
#endif /* _AO_PINS_H_ */