#include <ao.h>
-struct ao_stm_usart {
- struct ao_fifo rx_fifo;
- struct ao_fifo tx_fifo;
- struct stm_usart *reg;
- uint8_t tx_started;
-};
-
void
ao_debug_out(char c)
{
}
static void
-ao_usart_tx_start(struct ao_stm_usart *usart)
+_ao_usart_tx_start(struct ao_stm_usart *usart)
{
if (!ao_fifo_empty(usart->tx_fifo) && !usart->tx_started)
{
}
if (sr & (1 << STM_USART_SR_TC)) {
usart->tx_started = 0;
- ao_usart_tx_start(usart);
+ _ao_usart_tx_start(usart);
ao_wakeup(&usart->tx_fifo);
}
}
-char
-ao_usart_getchar(struct ao_stm_usart *usart)
+int
+_ao_usart_pollchar(struct ao_stm_usart *usart)
{
- char c;
- cli();
- while (ao_fifo_empty(usart->rx_fifo))
- ao_sleep(&usart->rx_fifo);
- ao_fifo_remove(usart->rx_fifo, c);
- sei();
+ int c;
+
+ if (ao_fifo_empty(usart->rx_fifo))
+ c = AO_READ_AGAIN;
+ else {
+ uint8_t u;
+ ao_fifo_remove(usart->rx_fifo,u);
+ c = u;
+ }
return c;
}
char
-ao_usart_pollchar(struct ao_stm_usart *usart)
+ao_usart_getchar(struct ao_stm_usart *usart)
{
- char c;
- cli();
- if (ao_fifo_empty(usart->rx_fifo)) {
- sei();
- return AO_READ_AGAIN;
- }
- ao_fifo_remove(usart->rx_fifo,c);
- sei();
- return c;
+ int c;
+ ao_arch_block_interrupts();
+ while ((c = _ao_usart_pollchar(usart)) == AO_READ_AGAIN)
+ ao_sleep(&usart->rx_fifo);
+ ao_arch_release_interrupts();
+ return (char) c;
}
void
ao_usart_putchar(struct ao_stm_usart *usart, char c)
{
- cli();
+ ao_arch_block_interrupts();
while (ao_fifo_full(usart->tx_fifo))
ao_sleep(&usart->tx_fifo);
ao_fifo_insert(usart->tx_fifo, c);
- ao_usart_tx_start(usart);
- sei();
+ _ao_usart_tx_start(usart);
+ ao_arch_release_interrupts();
}
void
ao_usart_drain(struct ao_stm_usart *usart)
{
- cli();
+ ao_arch_block_interrupts();
while (!ao_fifo_empty(usart->tx_fifo))
ao_sleep(&usart->tx_fifo);
- sei();
+ ao_arch_release_interrupts();
}
static const struct {
uint32_t brr;
} ao_usart_speeds[] = {
[AO_SERIAL_SPEED_4800] = {
- STM_APB1 / 4800
+ AO_PCLK1 / 4800
},
[AO_SERIAL_SPEED_9600] = {
- STM_APB1 / 9600
+ AO_PCLK1 / 9600
},
[AO_SERIAL_SPEED_19200] = {
- STM_APB1 / 19200
+ AO_PCLK1 / 19200
},
[AO_SERIAL_SPEED_57600] = {
- STM_APB1 / 57600
+ AO_PCLK1 / 57600
+ },
+ [AO_SERIAL_SPEED_115200] = {
+ AO_PCLK1 / 115200
},
};
void
ao_usart_set_speed(struct ao_stm_usart *usart, uint8_t speed)
{
- if (speed > AO_SERIAL_SPEED_57600)
+ if (speed > AO_SERIAL_SPEED_115200)
return;
- stm_usart1.brr = ao_usart_speeds[speed].brr;
+ usart->reg->brr = ao_usart_speeds[speed].brr;
}
void
}
#if HAS_SERIAL_1
+
struct ao_stm_usart ao_stm_usart1;
-void stm_usart1_isr(void) { ao_usart_isr(&ao_stm_usart1, USE_SERIAL_STDIN); }
-#endif
+
+void stm_usart1_isr(void) { ao_usart_isr(&ao_stm_usart1, USE_SERIAL_1_STDIN); }
+
+char
+ao_serial1_getchar(void)
+{
+ return ao_usart_getchar(&ao_stm_usart1);
+}
+
+void
+ao_serial1_putchar(char c)
+{
+ ao_usart_putchar(&ao_stm_usart1, c);
+}
+
+int
+_ao_serial1_pollchar(void)
+{
+ return _ao_usart_pollchar(&ao_stm_usart1);
+}
+
+void
+ao_serial1_set_speed(uint8_t speed)
+{
+ ao_usart_set_speed(&ao_stm_usart1, speed);
+}
+#endif /* HAS_SERIAL_1 */
+
#if HAS_SERIAL_2
+
struct ao_stm_usart ao_stm_usart2;
-void stm_usart2_isr(void) { ao_usart_isr(&ao_stm_usart2, 0); }
-#endif
+
+void stm_usart2_isr(void) { ao_usart_isr(&ao_stm_usart2, USE_SERIAL_2_STDIN); }
+
+char
+ao_serial2_getchar(void)
+{
+ return ao_usart_getchar(&ao_stm_usart2);
+}
+
+void
+ao_serial2_putchar(char c)
+{
+ ao_usart_putchar(&ao_stm_usart2, c);
+}
+
+int
+_ao_serial2_pollchar(void)
+{
+ return _ao_usart_pollchar(&ao_stm_usart2);
+}
+
+void
+ao_serial2_set_speed(uint8_t speed)
+{
+ ao_usart_set_speed(&ao_stm_usart2, speed);
+}
+#endif /* HAS_SERIAL_2 */
+
#if HAS_SERIAL_3
+
struct ao_stm_usart ao_stm_usart3;
-void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, 0); }
-#endif
+
+void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, USE_SERIAL_2_STDIN); }
+
+char
+ao_serial3_getchar(void)
+{
+ return ao_usart_getchar(&ao_stm_usart3);
+}
+
+void
+ao_serial3_putchar(char c)
+{
+ ao_usart_putchar(&ao_stm_usart3, c);
+}
+
+int
+_ao_serial3_pollchar(void)
+{
+ return _ao_usart_pollchar(&ao_stm_usart3);
+}
+
+void
+ao_serial3_set_speed(uint8_t speed)
+{
+ ao_usart_set_speed(&ao_stm_usart3, speed);
+}
+#endif /* HAS_SERIAL_3 */
void
ao_serial_init(void)
{
-#ifdef HAS_SERIAL_1
+#if HAS_SERIAL_1
/*
* TX RX
* PA9 PA10
- * PB6 PB7
+ * PB6 PB7 *
*/
+#if SERIAL_1_PA9_PA10
stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOAEN);
- stm_moder_set(&stm_gpioa, 9, STM_MODER_ALTERNATE);
- stm_moder_set(&stm_gpioa, 10, STM_MODER_ALTERNATE);
stm_afr_set(&stm_gpioa, 9, STM_AFR_AF7);
stm_afr_set(&stm_gpioa, 10, STM_AFR_AF7);
-
+#else
+#if SERIAL_1_PB6_PB7
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOBEN);
+
+ stm_afr_set(&stm_gpiob, 6, STM_AFR_AF7);
+ stm_afr_set(&stm_gpiob, 7, STM_AFR_AF7);
+#else
+#error "No SERIAL_1 port configuration specified"
+#endif
+#endif
/* Enable USART */
stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_USART1EN);
ao_stm_usart1.reg = &stm_usart1;
+ ao_usart_init(&ao_stm_usart1);
stm_nvic_set_enable(STM_ISR_USART1_POS);
stm_nvic_set_priority(STM_ISR_USART1_POS, 4);
-#if USE_SERIAL_STDIN
- ao_add_stdio(ao_serial_pollchar,
- ao_serial_putchar,
+#if USE_SERIAL_1_STDIN
+ ao_add_stdio(_ao_serial1_pollchar,
+ ao_serial1_putchar,
NULL);
#endif
#endif
* PD5 PD6
*/
+#if SERIAL_2_PA2_PA3
stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOAEN);
- stm_moder_set(&stm_gpioa, 2, STM_MODER_ALTERNATE);
- stm_moder_set(&stm_gpioa, 3, STM_MODER_ALTERNATE);
stm_afr_set(&stm_gpioa, 2, STM_AFR_AF7);
stm_afr_set(&stm_gpioa, 3, STM_AFR_AF7);
-
+#else
+#if SERIAL_2_PD5_PD6
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIODEN);
+
+ stm_afr_set(&stm_gpiod, 5, STM_AFR_AF7);
+ stm_afr_set(&stm_gpiod, 6, STM_AFR_AF7);
+#else
+#error "No SERIAL_2 port configuration specified"
+#endif
+#endif
/* Enable USART */
stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART2EN);
ao_stm_usart2.reg = &stm_usart2;
+ ao_usart_init(&ao_stm_usart2);
stm_nvic_set_enable(STM_ISR_USART2_POS);
stm_nvic_set_priority(STM_ISR_USART2_POS, 4);
+#if USE_SERIAL_2_STDIN
+ ao_add_stdio(_ao_serial2_pollchar,
+ ao_serial2_putchar,
+ NULL);
+#endif
#endif
#if HAS_SERIAL_3
* PC10 PC11
* PD8 PD9
*/
+#if SERIAL_3_PB10_PB11
stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOBEN);
- stm_moder_set(&stm_gpiob, 10, STM_MODER_ALTERNATE);
- stm_moder_set(&stm_gpiob, 11, STM_MODER_ALTERNATE);
stm_afr_set(&stm_gpiob, 10, STM_AFR_AF7);
stm_afr_set(&stm_gpiob, 11, STM_AFR_AF7);
-
+#else
+#if SERIAL_3_PC10_PC11
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOCEN);
+
+ stm_afr_set(&stm_gpioc, 10, STM_AFR_AF7);
+ stm_afr_set(&stm_gpioc, 11, STM_AFR_AF7);
+#else
+#if SERIAL_3_PD8_PD9
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIODEN);
+
+ stm_afr_set(&stm_gpiod, 8, STM_AFR_AF7);
+ stm_afr_set(&stm_gpiod, 9, STM_AFR_AF7);
+#else
+#error "No SERIAL_3 port configuration specified"
+#endif
+#endif
+#endif
/* Enable USART */
stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART3EN);
ao_stm_usart3.reg = &stm_usart3;
+ ao_usart_init(&ao_stm_usart3);
stm_nvic_set_enable(STM_ISR_USART3_POS);
stm_nvic_set_priority(STM_ISR_USART3_POS, 4);
+#if USE_SERIAL_3_STDIN
+ ao_add_stdio(_ao_serial3_pollchar,
+ ao_serial3_putchar,
+ NULL);
#endif
-}
-
-#if HAS_SERIAL_1
-char
-ao_serial_getchar(void)
-{
- return ao_usart_getchar(&ao_stm_usart1);
-}
-
-#if USE_SERIAL_STDIN
-char
-ao_serial_pollchar(void)
-{
- return ao_usart_pollchar(&ao_stm_usart1);
-}
#endif
-
-void
-ao_serial_putchar(char c)
-{
- ao_usart_putchar(&ao_stm_usart1, c);
}
-#endif /* HAS_SERIAL_1 */