*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*/
+/* Using TeleMetrum v1.9 board */
+
#ifndef _AO_PINS_H_
#define _AO_PINS_H_
#define HAS_SERIAL_1 0
#define USE_SERIAL_1_STDIN 0
#define SERIAL_1_PB6_PB7 0
-#define SERIAL_1_PA9_PA10 1
+#define SERIAL_1_PA9_PA10 0
#define HAS_SERIAL_2 0
#define USE_SERIAL_2_STDIN 0
#define HAS_SERIAL_3 0
#define USE_SERIAL_3_STDIN 0
#define SERIAL_3_PB10_PB11 0
-#define SERIAL_3_PC10_PC11 1
+#define SERIAL_3_PC10_PC11 0
#define SERIAL_3_PD8_PD9 0
-#define ao_gps_getchar ao_serial3_getchar
-#define ao_gps_putchar ao_serial3_putchar
-#define ao_gps_set_speed ao_serial3_set_speed
-
-#define HAS_EEPROM 0
-#define USE_INTERNAL_FLASH 0
+#define HAS_EEPROM 1
+#define USE_INTERNAL_FLASH 1
+#define USE_STORAGE_CONFIG 0
+#define USE_EEPROM_CONFIG 1
#define HAS_USB 1
#define HAS_BEEP 0
#define HAS_RADIO 1
#define HAS_TELEMETRY 0
+#define HAS_RSSI 1
#define HAS_SPI_1 0
#define SPI_1_PA5_PA6_PA7 0 /* Barometer */
#define SPI_1_PE13_PE14_PE15 0 /* Accelerometer */
#define HAS_SPI_2 1
-#define SPI_2_PB13_PB14_PB15 1 /* Flash, Companion */
+#define SPI_2_PB13_PB14_PB15 1 /* Radio */
#define SPI_2_PD1_PD3_PD4 0
+#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
#define SPI_2_PORT (&stm_gpiob)
#define SPI_2_SCK_PIN 13
#define SPI_2_MISO_PIN 14
#define SPI_2_MOSI_PIN 15
-#define HAS_I2C_1 0
-#define I2C_1_PB8_PB9 1
-
-#define HAS_I2C_2 0
-#define I2C_2_PB10_PB11 1
-
#define PACKET_HAS_SLAVE 0
#define PACKET_HAS_MASTER 1
#define LOW_LEVEL_DEBUG 0
-#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOAEN
-#define LED_PORT_1_ENABLE STM_RCC_AHBENR_GPIOBEN
-#define LED_PORT_0 (&stm_gpioa)
-#define LED_PORT_0_MASK (0xff)
+#define LED_PORT_0_ENABLE STM_RCC_AHBENR_GPIOCEN
+#define LED_PORT_0 (&stm_gpioc)
+#define LED_PORT_0_MASK (0xffff)
#define LED_PORT_0_SHIFT 0
-#define LED_PORT_1_MASK (0xff00)
-#define LED_PORT_1_SHIFT 0
-#define LED_PORT_1 (&stm_gpiob)
-#define LED_PIN_RED 1
-#define LED_PIN_GREEN 12
+#define LED_PIN_RED 14
+#define LED_PIN_GREEN 15
#define AO_LED_RED (1 << LED_PIN_RED)
#define AO_LED_GREEN (1 << LED_PIN_GREEN)
#define AO_RADIO_CAL_DEFAULT 0x6ca333
#define AO_FEC_DEBUG 0
-#define AO_CC1120_SPI_CS_PORT (&stm_gpioc)
-#define AO_CC1120_SPI_CS_PIN 5
+#define AO_CC1120_SPI_CS_PORT (&stm_gpioa)
+#define AO_CC1120_SPI_CS_PIN 2
#define AO_CC1120_SPI_BUS AO_SPI_2_PB13_PB14_PB15
+#define AO_CC1120_SPI stm_spi2
+
+#define AO_CC1120_INT_PORT (&stm_gpioa)
+#define AO_CC1120_INT_PIN 3
-#define AO_CC1120_INT_PORT (&stm_gpioc)
-#define AO_CC1120_INT_PIN 14
+#define AO_CC1120_MCU_WAKEUP_PORT (&stm_gpioa)
+#define AO_CC1120_MCU_WAKEUP_PIN (4)
#define AO_CC1120_INT_GPIO 2
-#define HAS_BOOT_RADIO 1
+#define AO_CC1120_INT_GPIO_IOCFG CC1120_IOCFG2
+
+#define AO_CC1120_MARC_GPIO 3
+#define AO_CC1120_MARC_GPIO_IOCFG CC1120_IOCFG3
/*
* Profiling Viterbi decoding