#endif
uint16_t ao_pyro_fired;
+uint16_t ao_pyro_inhibited;
#ifndef PYRO_DBG
#define PYRO_DBG 0
default:
continue;
}
- return FALSE;
+ return false;
}
- return TRUE;
+ return true;
}
#ifndef AO_FLIGHT_TEST
{
switch (p) {
#if AO_PYRO_NUM > 0
- case 0: ao_gpio_set(AO_PYRO_PORT_0, AO_PYRO_PIN_0, AO_PYRO_0, v); break;
+ case 0: ao_gpio_set(AO_PYRO_PORT_0, AO_PYRO_PIN_0, v); break;
#endif
#if AO_PYRO_NUM > 1
- case 1: ao_gpio_set(AO_PYRO_PORT_1, AO_PYRO_PIN_1, AO_PYRO_1, v); break;
+ case 1: ao_gpio_set(AO_PYRO_PORT_1, AO_PYRO_PIN_1, v); break;
#endif
#if AO_PYRO_NUM > 2
- case 2: ao_gpio_set(AO_PYRO_PORT_2, AO_PYRO_PIN_2, AO_PYRO_2, v); break;
+ case 2: ao_gpio_set(AO_PYRO_PORT_2, AO_PYRO_PIN_2, v); break;
#endif
#if AO_PYRO_NUM > 3
- case 3: ao_gpio_set(AO_PYRO_PORT_3, AO_PYRO_PIN_3, AO_PYRO_3, v); break;
+ case 3: ao_gpio_set(AO_PYRO_PORT_3, AO_PYRO_PIN_3, v); break;
#endif
#if AO_PYRO_NUM > 4
- case 4: ao_gpio_set(AO_PYRO_PORT_4, AO_PYRO_PIN_4, AO_PYRO_4, v); break;
+ case 4: ao_gpio_set(AO_PYRO_PORT_4, AO_PYRO_PIN_4, v); break;
#endif
#if AO_PYRO_NUM > 5
- case 5: ao_gpio_set(AO_PYRO_PORT_5, AO_PYRO_PIN_5, AO_PYRO_5, v); break;
+ case 5: ao_gpio_set(AO_PYRO_PORT_5, AO_PYRO_PIN_5, v); break;
#endif
#if AO_PYRO_NUM > 6
- case 6: ao_gpio_set(AO_PYRO_PORT_6, AO_PYRO_PIN_6, AO_PYRO_6, v); break;
+ case 6: ao_gpio_set(AO_PYRO_PORT_6, AO_PYRO_PIN_6, v); break;
#endif
#if AO_PYRO_NUM > 7
- case 7: ao_gpio_set(AO_PYRO_PORT_7, AO_PYRO_PIN_7, AO_PYRO_7, v); break;
+ case 7: ao_gpio_set(AO_PYRO_PORT_7, AO_PYRO_PIN_7, v); break;
#endif
default: break;
}
for (p = 0; p < AO_PYRO_NUM; p++) {
pyro = &ao_config.pyro[p];
- /* Ignore igniters which have already fired
+ /* Ignore igniters which have already fired or inhibited
*/
- if (ao_pyro_fired & (1 << p))
+ if ((ao_pyro_fired|ao_pyro_inhibited) & (1 << p))
continue;
/* Ignore disabled igniters
/* Check to make sure the required conditions
* remain valid. If not, inhibit the channel
- * by setting the fired bit
+ * by setting the inhibited bit
*/
if (!ao_pyro_ready(pyro)) {
- ao_pyro_fired |= (1 << p);
+ ao_pyro_inhibited |= (1 << p);
continue;
}
ao_pyro_init(void)
{
#if AO_PYRO_NUM > 0
- ao_enable_output(AO_PYRO_PORT_0, AO_PYRO_PIN_0, AO_PYRO_0, 0);
+ ao_enable_output(AO_PYRO_PORT_0, AO_PYRO_PIN_0, 0);
#endif
#if AO_PYRO_NUM > 1
- ao_enable_output(AO_PYRO_PORT_1, AO_PYRO_PIN_1, AO_PYRO_1, 0);
+ ao_enable_output(AO_PYRO_PORT_1, AO_PYRO_PIN_1, 0);
#endif
#if AO_PYRO_NUM > 2
- ao_enable_output(AO_PYRO_PORT_2, AO_PYRO_PIN_2, AO_PYRO_2, 0);
+ ao_enable_output(AO_PYRO_PORT_2, AO_PYRO_PIN_2, 0);
#endif
#if AO_PYRO_NUM > 3
- ao_enable_output(AO_PYRO_PORT_3, AO_PYRO_PIN_3, AO_PYRO_3, 0);
+ ao_enable_output(AO_PYRO_PORT_3, AO_PYRO_PIN_3, 0);
#endif
#if AO_PYRO_NUM > 4
- ao_enable_output(AO_PYRO_PORT_4, AO_PYRO_PIN_4, AO_PYRO_4, 0);
+ ao_enable_output(AO_PYRO_PORT_4, AO_PYRO_PIN_4, 0);
#endif
#if AO_PYRO_NUM > 5
- ao_enable_output(AO_PYRO_PORT_5, AO_PYRO_PIN_5, AO_PYRO_5, 0);
+ ao_enable_output(AO_PYRO_PORT_5, AO_PYRO_PIN_5, 0);
#endif
#if AO_PYRO_NUM > 6
- ao_enable_output(AO_PYRO_PORT_6, AO_PYRO_PIN_6, AO_PYRO_6, 0);
+ ao_enable_output(AO_PYRO_PORT_6, AO_PYRO_PIN_6, 0);
#endif
#if AO_PYRO_NUM > 7
- ao_enable_output(AO_PYRO_PORT_7, AO_PYRO_PIN_7, AO_PYRO_7, 0);
+ ao_enable_output(AO_PYRO_PORT_7, AO_PYRO_PIN_7, 0);
#endif
ao_add_task(&ao_pyro_task, ao_pyro, "pyro");
}