altos/stm32f1: Grab both TX/RX DMA mutexes while doing I2C

[fw/altos] / src / drivers / ao_st7565.h

diff --git a/src/drivers/ao_st7565.h b/src/drivers/ao_st7565.h
index c3f8f1bfcdf513c00eaeeecedecabd52f1f1c454..b5627f3be24cf8340c949ddf19fc8f78b56eb54f 100644 (file)
--- a/src/drivers/ao_st7565.h
+++ b/src/drivers/ao_st7565.h
@@ -21,37 +21,78 @@
 
 #include <ao_draw.h>
 
-#define AO_ST7565_DISPLAY_OFF                  0xae
-#define AO_ST7565_DISPLAY_ON                   0xaf
-#define AO_ST7565_DISPLAY_START_LINE_SET(line) (0x40 | (line))
-#define AO_ST7565_PAGE_ADDRESS_SET(page)       (0xb0 | (page))
-#define AO_ST7565_COLUMN_ADDRESS_SET_MSN(nib)  (0x10 | (nib))
-#define AO_ST7565_COLUMN_ADDRESS_SET_LSN(nib)  (0x00 | (nib))
-#define AO_ST7565_ADC_SELECT_NORMAL            0xa0
-#define AO_ST7565_ADC_SELECT_REVERSE           0xa1
-#define AO_ST7565_DISPLAY_NORMAL               0xa6
-#define AO_ST7565_DISPLAY_REVERSE              0xa7
-#define AO_ST7565_DISPLAY_ALL_POINTS_OFF       0xa4
-#define AO_ST7565_DISPLAY_ALL_POINTS_ON                0xa5
-#define AO_ST7565_LCD_BIAS_1_9                 0xa2
-#define AO_ST7565_LCD_BIAS_1_7                 0xa3
-#define AO_ST7565_RMW                          0xe0
-#define AO_ST7565_RMW_END                      0xee
-#define AO_ST7565_RESET                                0xe2
-#define AO_ST7565_COMMON_MODE_NORMAL           0xc0
-#define AO_ST7565_COMMON_MODE_REVERSE          0xc8
-#define AO_ST7565_POWER_CONTROL_SET(pc)                (0x28 | (pc))
-#define AO_ST7565_RESISTOR_RATIO_SET(rr)       (0x20 | (rr))
-#define AO_ST7565_ELECTRONIC_VOLUME_SET                0x81
-#define AO_ST7565_SLEEP_MODE                   0xac
-#define AO_ST7565_BOOSTER_RATIO_SET            0xf8
-#define AO_ST7565_NOP                          0xe3
-
-#define AO_ST7565_SPI_SPEED                    ao_spi_speed(20000000)
+/*
+ * Wiring the NewHaven NHD-C12864LZ-FSW-FBW-3V3 display
+ *
+ * PIN Symbol  Connection
+ *  1  /CS1    Chip select. Active low.
+ *  2  /RES    Reset. Active low.
+ *  3  A0      Register select. 0: instruction, 1: data
+ *  4  /WR     NC
+ *  5  /RD     NC
+ *  6  DB0     NC
+ *  7  DB1     NC
+ *  8  DB2     NC
+ *  8  DB3     NC
+ *  10 DB4     NC
+ *  11 DB5     NC
+ *  12 DB6     SPI clock. Mode 3 (idle high, rising edge)
+ *  13 DB7     SPI data.
+ *  14 Vdd     +3.3V
+ *  15 Vss     Ground
+ *  16 Vout    1uF to ground
+ *  17  CAP3+  1uF to CAP1-
+ *  18 CAP1-   1uF to CAP3+ and CAP1+
+ *  19 CAP1+   1uF to CAP1-
+ *  20 CAP2+   1uF to CAP2-
+ *  21 CAP2-   1uF to CAP2+
+ *  22 V4      1uF to ground
+ *  23 V3      1uF to ground
+ *  24 V2      1uF to ground
+ *  25 V1      1uF to ground
+ *  26 V0      1uF to ground
+ *  27 C86     MPU select. Ground
+ *  28 PS      Parallel/serial select. Ground
+ */
+
+#define ST7565_DISPLAY_OFF                     0xae
+#define ST7565_DISPLAY_ON                      0xaf
+#define ST7565_DISPLAY_START_LINE_SET(line)    (0x40 | (line))
+#define ST7565_PAGE_ADDRESS_SET(page)          (0xb0 | (page))
+#define ST7565_COLUMN_ADDRESS_SET_MSN(nib)     (0x10 | (nib))
+#define ST7565_COLUMN_ADDRESS_SET_LSN(nib)     (0x00 | (nib))
+#define ST7565_ADC_SELECT_NORMAL               0xa0
+#define ST7565_ADC_SELECT_REVERSE              0xa1
+#define ST7565_DISPLAY_NORMAL                  0xa6
+#define ST7565_DISPLAY_REVERSE                 0xa7
+#define ST7565_DISPLAY_ALL_POINTS_OFF          0xa4
+#define ST7565_DISPLAY_ALL_POINTS_ON           0xa5
+#define ST7565_LCD_BIAS_1_9                    0xa2
+#define ST7565_LCD_BIAS_1_7                    0xa3
+#define ST7565_RMW                             0xe0
+#define ST7565_RMW_END                         0xee
+#define ST7565_RESET                           0xe2
+#define ST7565_COMMON_MODE_NORMAL              0xc0
+#define ST7565_COMMON_MODE_REVERSE             0xc8
+#define ST7565_POWER_CONTROL_SET(pc)           (0x28 | (pc))
+#define ST7565_RESISTOR_RATIO_SET(rr)          (0x20 | (rr))
+#define ST7565_ELECTRONIC_VOLUME_SET           0x81
+#define ST7565_SLEEP_MODE                      0xac
+#define ST7565_BOOSTER_RATIO_SET               0xf8
+#define ST7565_NOP                             0xe3
+
+/* Max 50ns SPI clock time */
+#define AO_ST7565_SPI_SPEED                    ao_spi_speed(AO_ST7565_SPI_BUS, 20000000)
 
 void
 ao_st7565_update(struct ao_bitmap *bitmap);
 
+void
+ao_st7565_set_brightness(uint8_t val);
+
+uint8_t
+ao_st7565_get_brightness(void);
+
 void
 ao_st7565_init(void);