altos: Get CC115L radio working.

[fw/altos] / src / drivers / ao_rf_cc115l.h

diff --git a/src/drivers/ao_rf_cc115l.h b/src/drivers/ao_rf_cc115l.h
deleted file mode 100644 (file)
index 50a730a..0000000
--- a/src/drivers/ao_rf_cc115l.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/***************************************************************
- *  SmartRF Studio(tm) Export
- *
- *  Radio register settings specifed with address, value
- *
- *  RF device: CC115L
- *
- ***************************************************************/
-
-
-#if 0
-        CC115L_IOCFG2,                      0x2e,        /* GDO2 Output Pin Configuration */
-        CC115L_IOCFG1,                      0x2e,        /* GDO1 Output Pin Configuration */
-        CC115L_IOCFG0,                      0x06,        /* GDO0 Output Pin Configuration */
-        CC115L_FIFOTHR,                     0x47,        /* TX FIFO Thresholds */
-        CC115L_SYNC1,                       0xd3,        /* Sync Word, High Byte */
-        CC115L_SYNC0,                       0x91,        /* Sync Word, Low Byte */
-        CC115L_PKTLEN,                      0xff,        /* Packet Length */
-        CC115L_PKTCTRL0,                    0x05,        /* Packet Automation Control */
-        CC115L_CHANNR,                      0x00,        /* Channel number */
-        CC115L_FSCTRL0,                     0x00,        /* Frequency Synthesizer Control */
-        CC115L_FREQ2,                       0x10,        /* Frequency Control Word, High Byte */
-        CC115L_FREQ1,                       0xb6,        /* Frequency Control Word, Middle Byte */
-        CC115L_FREQ0,                       0xa5,        /* Frequency Control Word, Low Byte */
-        CC115L_MDMCFG4,                     0xfa,        /* Modem Configuration */
-        CC115L_MDMCFG3,                     0x83,        /* Modem Configuration */
-        CC115L_MDMCFG2,                     0x13,        /* Modem Configuration */
-        CC115L_MDMCFG1,                     0x21,        /* Modem Configuration */
-        CC115L_MDMCFG0,                     0xf8,        /* Modem Configuration */
-        CC115L_DEVIATN,                     0x35,        /* Modem Deviation Setting */
-        CC115L_MCSM1,                       0x30,        /* Main Radio Control State Machine Configuration */
-        CC115L_MCSM0,                       0x18,        /* Main Radio Control State Machine Configuration */
-        CC115L_RESERVED_0X20,               0xfb,        /* Use setting from SmartRF Studio */
-        CC115L_FREND0,                      0x10,        /* Front End TX Configuration */
-        CC115L_FSCAL3,                      0xe9,        /* Frequency Synthesizer Calibration */
-        CC115L_FSCAL2,                      0x2a,        /* Frequency Synthesizer Calibration */
-        CC115L_FSCAL1,                      0x00,        /* Frequency Synthesizer Calibration */
-        CC115L_FSCAL0,                      0x1f,        /* Frequency Synthesizer Calibration */
-        CC115L_RESERVED_0X29,               0x89,        /* Use setting from SmartRF Studio */
-        CC115L_RESERVED_0X2A,               0x127,       /* Use setting from SmartRF Studio */
-        CC115L_RESERVED_0X2B,               0x63,        /* Use setting from SmartRF Studio */
-        CC115L_TEST2,                       0x81,        /* Various Test Settings */
-        CC115L_TEST1,                       0x35,        /* Various Test Settings */
-        CC115L_TEST0,                       0x09,        /* Various Test Settings */
-        CC115L_PARTNUM,                     0x00,        /* Chip ID */
-        CC115L_VERSION,                     0x09,        /* Chip ID */
-        CC115L_MARCSTATE,                   0x00,        /* Main Radio Control State Machine State */
-        CC115L_PKTSTATUS,                   0x00,        /* Current GDOx Status and Packet Status */
-        CC115L_TXBYTES,                     0x00,        /* Underflow and Number of Bytes */
-#endif
-               
-/***************************************************************
- *  SmartRF Studio(tm) Export
- *
- *  Radio register settings specifed with address, value
- *
- *  RF device: CC115L
- *
- ***************************************************************/
-
-
-        CC115L_IOCFG0,                      0x06,       /* GDO0 Output Pin Configuration */
-        CC115L_FIFOTHR,                     0x47,       /* TX FIFO Thresholds */
-        CC115L_PKTCTRL0,                    0x05,       /* Packet Automation Control */
-        CC115L_FREQ2,                       0x10,       /* Frequency Control Word, High Byte */
-        CC115L_FREQ1,                       0xb6,       /* Frequency Control Word, Middle Byte */
-        CC115L_FREQ0,                       0xa5,       /* Frequency Control Word, Low Byte */
-        CC115L_MDMCFG4,                     0xfa,       /* Modem Configuration */
-        CC115L_MDMCFG3,                     0x83,       /* Modem Configuration */
-        CC115L_MDMCFG2,                     0x13,       /* Modem Configuration */
-        CC115L_MDMCFG1,                     0x21,       /* Modem Configuration */
-        CC115L_DEVIATN,                     0x35,       /* Modem Deviation Setting */
-        CC115L_MCSM0,                       0x18,       /* Main Radio Control State Machine Configuration */
-        CC115L_RESERVED_0X20,               0xfb,       /* Use setting from SmartRF Studio */
-        CC115L_FSCAL3,                      0xe9,       /* Frequency Synthesizer Calibration */
-        CC115L_FSCAL2,                      0x2a,       /* Frequency Synthesizer Calibration */
-        CC115L_FSCAL1,                      0x00,       /* Frequency Synthesizer Calibration */
-        CC115L_FSCAL0,                      0x1f,       /* Frequency Synthesizer Calibration */
-        CC115L_TEST2,                       0x81,       /* Various Test Settings */
-        CC115L_TEST1,                       0x35,       /* Various Test Settings */
-        CC115L_TEST0,                       0x09,       /* Various Test Settings */
-
-       CC115L_PA,                          0x00,        /* Power setting (0dBm) */