ao_siren(uint8_t v)
{
#ifdef AO_SIREN
- ao_gpio_set(AO_SIREN_PORT, AO_SIREN_PIN, AO_SIREN, v);
+ ao_gpio_set(AO_SIREN_PORT, AO_SIREN_PIN, v);
#else
#if HAS_BEEP
ao_beep(v ? AO_BEEP_MID : 0);
ao_strobe(uint8_t v)
{
#ifdef AO_STROBE
- ao_gpio_set(AO_STROBE_PORT, AO_STROBE_PIN, AO_STROBE, v);
+ ao_gpio_set(AO_STROBE_PORT, AO_STROBE_PIN, v);
#else
(void) v;
#endif
* AO_PAD_R_IGNITER_SENSE_GND Resistors from igniter sense ADC inputs to ground
*/
-int16_t
+static int16_t
ao_pad_decivolt(int16_t adc, int16_t r_plus, int16_t r_minus)
{
int32_t mul = (int32_t) AO_ADC_REFERENCE_DV * (r_plus + r_minus);
}
}
-void
+static void
ao_pad_test(void)
{
uint8_t c;
}
}
-void
+static void
ao_pad_manual(void)
{
uint8_t ignite;
static struct ao_task ao_pad_monitor_task;
#if DEBUG
-void
+static void
ao_pad_set_debug(void)
{
uint16_t r = ao_cmd_decimal();
}
#endif
#if AO_PAD_NUM > 0
- ao_enable_output(AO_PAD_0_PORT, AO_PAD_PIN_0, AO_PAD_0, 0);
+ ao_enable_output(AO_PAD_0_PORT, AO_PAD_PIN_0, 0);
#endif
#if AO_PAD_NUM > 1
- ao_enable_output(AO_PAD_1_PORT, AO_PAD_PIN_1, AO_PAD_1, 0);
+ ao_enable_output(AO_PAD_1_PORT, AO_PAD_PIN_1, 0);
#endif
#if AO_PAD_NUM > 2
- ao_enable_output(AO_PAD_2_PORT, AO_PAD_PIN_2, AO_PAD_2, 0);
+ ao_enable_output(AO_PAD_2_PORT, AO_PAD_PIN_2, 0);
#endif
#if AO_PAD_NUM > 3
- ao_enable_output(AO_PAD_3_PORT, AO_PAD_PIN_3, AO_PAD_3, 0);
+ ao_enable_output(AO_PAD_3_PORT, AO_PAD_PIN_3, 0);
#endif
#if AO_PAD_NUM > 4
- ao_enable_output(AO_PAD_4_PORT, AO_PAD_PIN_4, AO_PAD_4, 0);
+ ao_enable_output(AO_PAD_4_PORT, AO_PAD_PIN_4, 0);
#endif
#if AO_PAD_NUM > 5
- ao_enable_output(AO_PAD_5_PORT, AO_PAD_PIN_5, AO_PAD_5, 0);
+ ao_enable_output(AO_PAD_5_PORT, AO_PAD_PIN_5, 0);
#endif
#if AO_PAD_NUM > 5
- ao_enable_output(AO_PAD_6_PORT, AO_PAD_PIN_6, AO_PAD_6, 0);
+ ao_enable_output(AO_PAD_6_PORT, AO_PAD_PIN_6, 0);
#endif
#if AO_PAD_NUM > 7
- ao_enable_output(AO_PAD_7_PORT, AO_PAD_PIN_7, AO_PAD_7, 0);
+ ao_enable_output(AO_PAD_7_PORT, AO_PAD_PIN_7, 0);
#endif
#ifdef AO_STROBE
- ao_enable_output(AO_STROBE_PORT, AO_STROBE_PIN, AO_STROBE, 0);
+ ao_enable_output(AO_STROBE_PORT, AO_STROBE_PIN, 0);
#endif
#ifdef AO_SIREN
- ao_enable_output(AO_SIREN_PORT, AO_SIREN_PIN, AO_SIREN, 0);
+ ao_enable_output(AO_SIREN_PORT, AO_SIREN_PIN, 0);
#endif
ao_cmd_register(&ao_pad_cmds[0]);
ao_add_task(&ao_pad_task, ao_pad, "pad listener");