altos: Replace ao_xmem functions with direct mem calls

[fw/altos] / src / drivers / ao_mpu9250.c

diff --git a/src/drivers/ao_mpu9250.c b/src/drivers/ao_mpu9250.c
index 9dce9f1a5a0d4f79f241c50e2a238a09d2b2e906..1b31edf4611754fe1b8c8d8fe52562b161e8579e 100644 (file)
--- a/src/drivers/ao_mpu9250.c
+++ b/src/drivers/ao_mpu9250.c
@@ -26,8 +26,6 @@
 
 static uint8_t ao_mpu9250_configured;
 
-extern uint8_t ao_sensor_errors;
-
 #ifndef AO_MPU9250_I2C_INDEX
 #define AO_MPU9250_SPI 1
 #else
@@ -63,7 +61,7 @@ _ao_mpu9250_reg_write(uint8_t addr, uint8_t value)
 #else
        ao_i2c_get(AO_MPU9250_I2C_INDEX);
        ao_i2c_start(AO_MPU9250_I2C_INDEX, MPU9250_ADDR_WRITE);
-       ao_i2c_send(d, 2, AO_MPU9250_I2C_INDEX, TRUE);
+       ao_i2c_send(d, 2, AO_MPU9250_I2C_INDEX, true);
        ao_i2c_put(AO_MPU9250_I2C_INDEX);
 #endif
 }
@@ -80,9 +78,9 @@ _ao_mpu9250_read(uint8_t addr, void *data, uint8_t len)
 #else
        ao_i2c_get(AO_MPU9250_I2C_INDEX);
        ao_i2c_start(AO_MPU9250_I2C_INDEX, MPU9250_ADDR_WRITE);
-       ao_i2c_send(&addr, 1, AO_MPU9250_I2C_INDEX, FALSE);
+       ao_i2c_send(&addr, 1, AO_MPU9250_I2C_INDEX, false);
        ao_i2c_start(AO_MPU9250_I2C_INDEX, MPU9250_ADDR_READ);
-       ao_i2c_recv(data, len, AO_MPU9250_I2C_INDEX, TRUE);
+       ao_i2c_recv(data, len, AO_MPU9250_I2C_INDEX, true);
        ao_i2c_put(AO_MPU9250_I2C_INDEX);
 #endif
 }
@@ -100,9 +98,9 @@ _ao_mpu9250_reg_read(uint8_t addr)
 #else
        ao_i2c_get(AO_MPU9250_I2C_INDEX);
        ao_i2c_start(AO_MPU9250_I2C_INDEX, MPU9250_ADDR_WRITE);
-       ao_i2c_send(&addr, 1, AO_MPU9250_I2C_INDEX, FALSE);
+       ao_i2c_send(&addr, 1, AO_MPU9250_I2C_INDEX, false);
        ao_i2c_start(AO_MPU9250_I2C_INDEX, MPU9250_ADDR_READ);
-       ao_i2c_recv(&value, 1, AO_MPU9250_I2C_INDEX, TRUE);
+       ao_i2c_recv(&value, 1, AO_MPU9250_I2C_INDEX, true);
        ao_i2c_put(AO_MPU9250_I2C_INDEX);
 #endif
        return value;
@@ -361,7 +359,7 @@ _ao_mpu9250_setup(void)
        }
 
        if (st_tries == ST_TRIES)
-               ao_sensor_errors = 1;
+               AO_SENSOR_ERROR(AO_DATA_MPU9250);
 
        /* Set up the mag sensor */
 
@@ -372,7 +370,7 @@ _ao_mpu9250_setup(void)
        }
 
        if (mag_tries == MAG_TRIES)
-               ao_sensor_errors = 1;
+               AO_SENSOR_ERROR(AO_DATA_MPU9250);
 
        /* Select continuous mode 2 (100Hz), 16 bit samples */