#include <ao_fec.h>
#include <ao_packet.h>
+#define AO_RADIO_MAX_RECV sizeof(struct ao_packet)
+#define AO_RADIO_MAX_SEND sizeof(struct ao_packet)
+
uint8_t ao_radio_wake;
uint8_t ao_radio_mutex;
uint8_t ao_radio_abort;
{
ao_radio_start_tx();
- cli();
+ ao_arch_block_interrupts();
while (!ao_radio_wake && !ao_radio_abort)
ao_sleep(&ao_radio_wake);
- sei();
+ ao_arch_release_interrupts();
if (!ao_radio_wake)
ao_radio_idle();
ao_radio_put();
}
}
+static uint8_t tx_data[(AO_RADIO_MAX_SEND + 4) * 2];
+
void
ao_radio_send(const void *d, uint8_t size)
{
uint8_t marc_status;
- static uint8_t encode[256];
- uint8_t *e = encode;
+ uint8_t *e = tx_data;
uint8_t encode_len;
uint8_t this_len;
uint8_t started = 0;
uint8_t fifo_space;
- encode_len = ao_fec_encode(d, size, encode);
+ encode_len = ao_fec_encode(d, size, tx_data);
ao_radio_get(encode_len);
do {
ao_radio_wake = 0;
- cli();
+ ao_arch_block_interrupts();
while (!ao_radio_wake)
ao_sleep(&ao_radio_wake);
- sei();
+ ao_arch_release_interrupts();
if (!encode_len)
break;
fifo_space = ao_radio_tx_fifo_space();
ao_radio_put();
}
-#define AO_RADIO_MAX_RECV 90
-
static uint8_t rx_data[(AO_RADIO_MAX_RECV + 4) * 2 * 8];
static uint16_t rx_data_count;
static uint16_t rx_data_consumed;
static uint16_t
ao_radio_rx_wait(void)
{
- cli();
+ ao_arch_block_interrupts();
rx_waiting = 1;
while (rx_data_cur - rx_data_consumed < AO_FEC_DECODE_BLOCK &&
!ao_radio_abort) {
ao_sleep(&ao_radio_wake);
}
rx_waiting = 0;
- sei();
+ ao_arch_release_interrupts();
if (ao_radio_abort)
return 0;
rx_data_consumed += AO_FEC_DECODE_BLOCK;
ao_radio_configured = 0;
ao_spi_init_cs (AO_CC1120_SPI_CS_PORT, (1 << AO_CC1120_SPI_CS_PIN));
+#if 0
AO_CC1120_SPI_CS_PORT->bsrr = ((uint32_t) (1 << AO_CC1120_SPI_CS_PIN));
for (i = 0; i < 10000; i++) {
- if ((SPI_2_GPIO->idr & (1 << SPI_2_MISO)) == 0)
+ if ((SPI_2_PORT->idr & (1 << SPI_2_MISO_PIN)) == 0)
break;
}
AO_CC1120_SPI_CS_PORT->bsrr = (1 << AO_CC1120_SPI_CS_PIN);
if (i == 10000)
- ao_panic(AO_PANIC_SELF_TEST);
+ ao_panic(AO_PANIC_SELF_TEST_CC1120);
+#endif
/* Enable the EXTI interrupt for the appropriate pin */
ao_enable_port(AO_CC1120_INT_PORT);