#include "ao.h"
/* Total bytes of available storage */
-__xdata uint32_t ao_storage_total;
+__pdata uint32_t ao_storage_total;
/* Block size - device is erased in these units. At least 256 bytes */
-__xdata uint32_t ao_storage_block;
+__pdata uint32_t ao_storage_block;
/* Byte offset of config block. Will be ao_storage_block bytes long */
-__xdata uint32_t ao_storage_config;
+__pdata uint32_t ao_storage_config;
/* Storage unit size - device reads and writes must be within blocks of this size. Usually 256 bytes. */
-__xdata uint16_t ao_storage_unit;
+__pdata uint16_t ao_storage_unit;
/*
* Each flash chip is arranged in 64kB sectors; the
static __xdata uint8_t ao_m25_instruction[4];
-#define M25_SELECT(cs) (SPI_CS_PORT &= ~(cs))
-#define M25_DESELECT(cs) (SPI_CS_PORT |= (cs))
+#define M25_SELECT(cs) ao_spi_get_mask(SPI_CS_PORT,cs)
+#define M25_DESELECT(cs) ao_spi_put_mask(SPI_CS_PORT,cs)
#define M25_BLOCK_SHIFT 16
#define M25_BLOCK 65536L