#define STLINK_H
#include <stdint.h>
+#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
+
+#define STLINK_ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
+
// Max data transfer size.
// 6kB = max mem32_read block, 8kB sram
//#define Q_BUF_LEN 96
#define CORE_M3_R2 0x4BA00477
#define CORE_M4_R0 0x2BA01477
- /*
- * Chip IDs are explained in the appropriate programming manual for the
- * DBGMCU_IDCODE register (0xE0042000)
- */
- // stm32 chipids, only lower 12 bits..
-#define STM32_CHIPID_F1_MEDIUM 0x410
-#define STM32_CHIPID_F2 0x411
-#define STM32_CHIPID_F1_LOW 0x412
-#define STM32_CHIPID_F4 0x413
-#define STM32_CHIPID_F1_HIGH 0x414
-#define STM32_CHIPID_L4 0x415 /* Seen on L4x6 (RM0351) */
-#define STM32_CHIPID_L1_MEDIUM 0x416
-#define STM32_CHIPID_L0 0x417
-#define STM32_CHIPID_F1_CONN 0x418
-#define STM32_CHIPID_F4_HD 0x419
-#define STM32_CHIPID_F1_VL_MEDIUM_LOW 0x420
-
-#define STM32_CHIPID_F446 0x421
-#define STM32_CHIPID_F3 0x422
-#define STM32_CHIPID_F4_LP 0x423
-
-#define STM32_CHIPID_F411RE 0x431
-
-#define STM32_CHIPID_L1_MEDIUM_PLUS 0x427
-#define STM32_CHIPID_F1_VL_HIGH 0x428
-#define STM32_CHIPID_L1_CAT2 0x429
-
-#define STM32_CHIPID_F1_XL 0x430
-
-#define STM32_CHIPID_F37x 0x432
-#define STM32_CHIPID_F4_DE 0x433
-#define STM32_CHIPID_F4_DE 0x433
-
-#define STM32_CHIPID_F4_DSI 0x434
-
-#define STM32_CHIPID_L1_HIGH 0x436
-#define STM32_CHIPID_L152_RE 0x437
-#define STM32_CHIPID_F334 0x438
-
-#define STM32_CHIPID_F3_SMALL 0x439
-#define STM32_CHIPID_F0 0x440
-#define STM32_CHIPID_F09X 0x442
-#define STM32_CHIPID_F0_SMALL 0x444
-
-#define STM32_CHIPID_F04 0x445
-
-#define STM32_CHIPID_F303_HIGH 0x446
-#define STM32_CHIPID_L0_CAT5 0x447
-#define STM32_CHIPID_L0_CAT2 0x425
-
-#define STM32_CHIPID_F0_CAN 0x448
-
-#define STM32_CHIPID_F7 0x449
-
- /*
- * 0x436 is actually assigned to some L1 chips that are called "Medium-Plus"
- * and some that are called "High". 0x427 is assigned to the other "Medium-
- * plus" chips. To make it a bit simpler we just call 427 MEDIUM_PLUS and
- * 0x436 HIGH.
- */
-
// Constant STM32 memory map figures
#define STM32_FLASH_BASE 0x08000000
#define STM32_SRAM_BASE 0x20000000
FLASH_TYPE_L4,
};
- typedef struct chip_params_ {
- uint32_t chip_id;
- char* description;
- enum flash_type flash_type;
- uint32_t flash_size_reg;
- uint32_t flash_pagesize;
- uint32_t sram_size;
- uint32_t bootrom_base, bootrom_size;
- } chip_params_t;
-
-
- // These maps are from a combination of the Programming Manuals, and
- // also the Reference manuals. (flash size reg is normally in ref man)
- static const chip_params_t devices[] = {
- {
- //RM0385 and DS10916 document was used to find these paramaters
- .chip_id = STM32_CHIPID_F7,
- .description = "F7 device",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1ff0f442, // section 41.2
- .flash_pagesize = 0x800, // No flash pages
- .sram_size = 0x50000, // "SRAM" byte size in hex from DS Fig 18
- .bootrom_base = 0x00100000, // "System memory" starting address from DS Fig 18
- .bootrom_size = 0xEDC0 // "System memory" byte size in hex from DS Fig 18
- },
- { // table 2, PM0063
- .chip_id = STM32_CHIPID_F1_MEDIUM,
- .description = "F1 Medium-density device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x400,
- .sram_size = 0x5000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- { // table 1, PM0059
- .chip_id = STM32_CHIPID_F2,
- .description = "F2 device",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1fff7a22, /* As in RM0033 Rev 5*/
- .flash_pagesize = 0x20000,
- .sram_size = 0x20000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- { // PM0063
- .chip_id = STM32_CHIPID_F1_LOW,
- .description = "F1 Low-density device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x400,
- .sram_size = 0x2800,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- {
- .chip_id = STM32_CHIPID_F4,
- .description = "F4 device",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
- .flash_pagesize = 0x4000,
- .sram_size = 0x30000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- .chip_id = STM32_CHIPID_F4_DSI,
- .description = "F46x and F47x device",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
- .flash_pagesize = 0x4000,
- .sram_size = 0x40000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- .chip_id = STM32_CHIPID_F4_HD,
- .description = "F42x and F43x device",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
- .flash_pagesize = 0x4000,
- .sram_size = 0x40000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- .chip_id = STM32_CHIPID_F4_LP,
- .description = "F4 device (low power)",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1FFF7A22,
- .flash_pagesize = 0x4000,
- .sram_size = 0x10000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- .chip_id = STM32_CHIPID_F411RE,
- .description = "F4 device (low power) - stm32f411re",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1FFF7A22,
- .flash_pagesize = 0x4000,
- .sram_size = 0x20000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- .chip_id = STM32_CHIPID_F4_DE,
- .description = "F4 device (Dynamic Efficency)",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1FFF7A22,
- .flash_pagesize = 0x4000,
- .sram_size = 0x18000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- .chip_id = STM32_CHIPID_F1_HIGH,
- .description = "F1 High-density device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x10000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- {
- // This ignores the EEPROM! (and uses the page erase size,
- // not the sector write protection...)
- .chip_id = STM32_CHIPID_L1_MEDIUM,
- .description = "L1 Med-density device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff8004c,
- .flash_pagesize = 0x100,
- .sram_size = 0x4000,
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
- },
- {
- .chip_id = STM32_CHIPID_L1_CAT2,
- .description = "L1 Cat.2 device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff8004c,
- .flash_pagesize = 0x100,
- .sram_size = 0x8000,
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
- },
- {
- .chip_id = STM32_CHIPID_L1_MEDIUM_PLUS,
- .description = "L1 Medium-Plus-density device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff800cc,
- .flash_pagesize = 0x100,
- .sram_size = 0x8000,/*Not completely clear if there are some with 48K*/
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
- },
- {
- .chip_id = STM32_CHIPID_L1_HIGH,
- .description = "L1 High-density device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff800cc,
- .flash_pagesize = 0x100,
- .sram_size = 0xC000, /*Not completely clear if there are some with 32K*/
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
- },
- {
- .chip_id = STM32_CHIPID_L152_RE,
- .description = "L152RE",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff800cc,
- .flash_pagesize = 0x100,
- .sram_size = 0x14000, /*Not completely clear if there are some with 32K*/
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
- },
- {
- .chip_id = STM32_CHIPID_F1_CONN,
- .description = "F1 Connectivity line device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x10000,
- .bootrom_base = 0x1fffb000,
- .bootrom_size = 0x4800
- },
- {//Low and Medium density VL have same chipid. RM0041 25.6.1
- .chip_id = STM32_CHIPID_F1_VL_MEDIUM_LOW,
- .description = "F1 Medium/Low-density Value Line device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x400,
- .sram_size = 0x2000,//0x1000 for low density devices
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- {
- // STM32F446x family. Support based on DM00135183.pdf (RM0390) document.
- .chip_id = STM32_CHIPID_F446,
- .description = "F446 device",
- .flash_type = FLASH_TYPE_F4,
- .flash_size_reg = 0x1fff7a22,
- .flash_pagesize = 0x20000,
- .sram_size = 0x20000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
- },
- {
- // This is STK32F303VCT6 device from STM32 F3 Discovery board.
- // Support based on DM00043574.pdf (RM0316) document.
- .chip_id = STM32_CHIPID_F3,
- .description = "F3 device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc,
- .flash_pagesize = 0x800,
- .sram_size = 0xa000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- {
- // This is STK32F373VCT6 device from STM32 F373 eval board
- // Support based on 303 above (37x and 30x have same memory map)
- .chip_id = STM32_CHIPID_F37x,
- .description = "F3 device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc,
- .flash_pagesize = 0x800,
- .sram_size = 0xa000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- {
- .chip_id = STM32_CHIPID_F1_VL_HIGH,
- .description = "F1 High-density value line device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x8000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
- },
- {
- .chip_id = STM32_CHIPID_F1_XL,
- .description = "F1 XL-density device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x18000,
- .bootrom_base = 0x1fffe000,
- .bootrom_size = 0x1800
- },
- {
- //Use this as an example for mapping future chips:
- //RM0091 document was used to find these paramaters
- .chip_id = STM32_CHIPID_F0_CAN,
- .description = "F07x device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x800, // Page sizes listed in Table 4
- .sram_size = 0x4000, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffC800, // "System memory" starting address from Table 2
- .bootrom_size = 0x3000 // "System memory" byte size in hex from Table 2
- },
- {
- //Use this as an example for mapping future chips:
- //RM0091 document was used to find these paramaters
- .chip_id = STM32_CHIPID_F0,
- .description = "F0 device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x400, // Page sizes listed in Table 4
- .sram_size = 0x2000, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
- .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
- },
- {
- .chip_id = STM32_CHIPID_F09X,
- .description = "F09X device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x800, // Page sizes listed in Table 4 (pg 56)
- .sram_size = 0x8000, // "SRAM" byte size in hex from Table 2 (pg 50)
- .bootrom_base = 0x1fffd800, // "System memory" starting address from Table 2
- .bootrom_size = 0x2000 // "System memory" byte size in hex from Table 2
- },
- {
- //Use this as an example for mapping future chips:
- //RM0091 document was used to find these paramaters
- .chip_id = STM32_CHIPID_F04,
- .description = "F04x device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x400, // Page sizes listed in Table 4
- .sram_size = 0x1800, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
- .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
- },
- {
- //Use this as an example for mapping future chips:
- //RM0091 document was used to find these paramaters
- .chip_id = STM32_CHIPID_F0_SMALL,
- .description = "F0 small device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x400, // Page sizes listed in Table 4
- .sram_size = 0x1000, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
- .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
- },
- {
- // STM32F30x
- .chip_id = STM32_CHIPID_F3_SMALL,
- .description = "F3 small device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc,
- .flash_pagesize = 0x800,
- .sram_size = 0xa000,
- .bootrom_base = 0x1fffd800,
- .bootrom_size = 0x2000
- },
- {
- // STM32L0x
- // RM0367,RM0377 documents was used to find these parameters
- .chip_id = STM32_CHIPID_L0,
- .description = "L0x3 device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff8007c,
- .flash_pagesize = 0x80,
- .sram_size = 0x2000,
- .bootrom_base = 0x1ff0000,
- .bootrom_size = 0x1000
- },
- {
- // STM32L0x Category 5
- // RM0367,RM0377 documents was used to find these parameters
- .chip_id = STM32_CHIPID_L0_CAT5,
- .description = "L0x Category 5 device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff8007c,
- .flash_pagesize = 0x80,
- .sram_size = 0x5000,
- .bootrom_base = 0x1ff0000,
- .bootrom_size = 0x2000
- },
- {
- // STM32L0x Category 2
- // RM0367,RM0377 documents was used to find these parameters
- .chip_id = STM32_CHIPID_L0_CAT2,
- .description = "L0x Category 2 device",
- .flash_type = FLASH_TYPE_L0,
- .flash_size_reg = 0x1ff8007c,
- .flash_pagesize = 0x80,
- .sram_size = 0x2000,
- .bootrom_base = 0x1ff0000,
- .bootrom_size = 0x1000
- },
- {
- // STM32F334
- // RM0364 document was used to find these parameters
- .chip_id = STM32_CHIPID_F334,
- .description = "F334 device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc,
- .flash_pagesize = 0x800,
- .sram_size = 0x3000,
- .bootrom_base = 0x1fffd800,
- .bootrom_size = 0x2000
- },
- {
- // This is STK32F303RET6 device from STM32 F3 Nucelo board.
- // Support based on DM00043574.pdf (RM0316) document rev 5.
- .chip_id = STM32_CHIPID_F303_HIGH,
- .description = "F303 high density device",
- .flash_type = FLASH_TYPE_F0,
- .flash_size_reg = 0x1ffff7cc, // 34.2.1 Flash size data register
- .flash_pagesize = 0x800, // 4.2.1 Flash memory organization
- .sram_size = 0x10000, // 3.3 Embedded SRAM
- .bootrom_base = 0x1fffd800, // 3.3.2 / Table 4 System Memory
- .bootrom_size = 0x2000
- },
- {
- // STM32L4x6
- // From RM0351.
- .chip_id = STM32_CHIPID_L4,
- .description = "L4 device",
- .flash_type = FLASH_TYPE_L4,
- .flash_size_reg = 0x1fff75e0, // "Flash size data register" (sec 45.2, page 1671)
- .flash_pagesize = 0x800, // 2K (sec 3.2, page 78; also appears in sec 3.3.1 and tables 4-6 on pages 79-81)
- // SRAM1 is "up to" 96k in the standard Cortex-M memory map;
- // SRAM2 is 32k mapped at at 0x10000000 (sec 2.3, page 73 for
- // sizes; table 2, page 74 for SRAM2 location)
- .sram_size = 0x18000,
- .bootrom_base = 0x1fff0000, // Tables 4-6, pages 80-81 (Bank 1 system memory)
- .bootrom_size = 0x7000 // 28k (per bank), same source as base
- },
-
- };
-
+#include "stlink/chipid.h"
typedef struct {
uint32_t r[16];
projects / fw / stlink / blobdiff