put notes in Releasing about keeping doc/header.inc up to date

[fw/altos] / doc / updating-firmware.inc

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index b1047ffa645db07bb20ce7536905f82d6207b6b4..b9216a2235288d58a8c50705d18b40a6b9b2101c 100644 (file)
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -84,7 +84,7 @@
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
-                       around it, and then the pins could sequentially across
+                       around it, and then the pins count sequentially across
                        the board. Be very careful to *not* short pin 8 to
                        anything as that is connected directly to the
                        battery. Pin 7 carries 3.3V and the board will crash
@@ -97,7 +97,7 @@
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
-                       around it, and then the pins could sequentially across
+                       around it, and then the pins count sequentially across
                        the board. Be very careful to *not* short pin 8 to
                        anything as that is connected directly to the
                        battery. Pin 7 carries 3.3V and the board will crash
@@ -105,12 +105,22 @@
                        the board.
                        endif::easymega[]
 
+                       ifdef::easytimer[]
+                       EasyTimer::
+
+                       Connect pin 5 and pin 1 of the debug connector, which
+                       is the six holes next to the beeper. Pin 1 can be
+                       identified by the square pad around it, and then the
+                       pins count sequentially across the board, making Pin 5
+                       the one on the other end of the row.
+                       endif::easytimer[]
+
                        ifdef::telemetrum[]
                        TeleMetrum v2 and newer::
 
                        Connect pin 6 and pin 1 of the companion
                        connector. Pin 1 can be identified by the square pad
-                       around it, and then the pins could sequentially across
+                       around it, and then the pins count sequentially across
                        the board. Be very careful to *not* short pin 8 to
                        anything as that is connected directly to the
                        battery. Pin 7 carries 3.3V and the board will crash
@@ -124,7 +134,7 @@
                        Connect pin 6 and pin 1 of the debug connector, which
                        is the six holes next to the beeper. Pin 1 can be
                        identified by the square pad around it, and then the
-                       pins could sequentially across the board, making Pin 6
+                       pins count sequentially across the board, making Pin 6
                        the one on the other end of the row.
                        endif::easymini[]