http://www.altusmetrum.org/AltOS/
ifdef::telemega[]
+
=== Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+
endif::telemega[]
ifndef::telemega[]
+
=== Updating EasyMini Firmware
+
endif::telemega[]
Self-programmable devices are reprogrammed by
the one on the other end of the row.
endif::easymini[]
+ TeleGPS v1::
+
+ Connect pin 32 on the CPU to ground. Pin 32 is the
+ right-most pin on the bottom edge of the CPU when the
+ board is oriented with the USB and battery connectors
+ to the right.
+
+ TeleGPS v2::
+
+ Connect together pins 1 and 5 of the Debug connector.
+ Pin 1 is the pin with the square pad around the hole.
+
ifdef::telemetrum[]
TeleDongle v3::
of the board. Ground is available on the capacitor
next to it, on the end towards the USB wires.
+ TeleBT v3::
+
+ Connect pin 4 on the CPU to 3.3V, which can be done by
+ connecting pin 1 to pin 4. Pin 1 is the left pin on
+ the lower edge of the chip when the unit is oriented
+ such that the SMA is at the top.
+
TeleBT v4::
Connect pin 30 on the CPU to ground. Pin 30 is the 6th