== TeleMega
- image::telemega-v1.0-top.jpg[width="5.5in"]
+ .TeleMega Board
+ image::telemega-v1.0-top.jpg[width=400]
TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
designed to easily fit in a 38mm coupler. Like TeleMetrum,
the board is aligned with the flight axis. It can be mounted
either antenna up or down.
+ TeleMega v2.0 has a few minor changes from v1.0:
+
+ * Companion connector matches EasyMega functions
+ * Serial port connector replaced with servo connector with
+ support for up to 4 PWM channels.
+ * Radio switched from cc1120 to cc1200.
+
+ None of these affect operation using the stock firmware, but
+ they do mean that the device needs different firmware to
+ operate correctly, so make sure you load the right firmware
+ when reflashing the device.
+
=== TeleMega Screw Terminals
TeleMega has two sets of nine screw terminals on the end of
the board opposite the telemetry antenna. They are as follows:
+ .TeleMega Screw Terminals
[options="header",grid="all",cols="2,3,10"]
|====
|Terminal #|Terminal Name|Description