--- /dev/null
+== EasyMini
+
+ image::easymini-top.jpg[width="5.5in"]
+
+ EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
+ designed to fit in a 24mm coupler tube. The connectors and
+ screw terminals match TeleMini v2.0, so you can easily swap between
+ EasyMini and TeleMini.
+
+ === EasyMini Screw Terminals
+
+ EasyMini has two sets of four screw terminals on the end of the
+ board opposite the telemetry antenna. Using the picture
+ above, the top four have connections for the main pyro
+ circuit and an external battery and the bottom four have
+ connections for the apogee pyro circuit and the power
+ switch. Counting from the left, the connections are as follows:
+
+ [options="header",grid="all",cols="2,3,10"]
+ |====
+ |Terminal #|Terminal Name|Description
+ |Top 1
+ |Main -
+ |Main pyro channel connection to pyro circuit
+
+ |Top 2
+ |Main +
+ |Main pyro channel common connection to battery +
+
+ |Top 3
+ |Battery +
+ |Positive external battery terminal
+
+ |Top 4
+ |Battery -
+ |Negative external battery terminal
+
+ |Bottom 1
+ |Apogee -
+ |Apogee pyro channel connection to pyro circuit
+
+ |Bottom 2
+ |Apogee +
+ |Apogee pyro channel common connection to battery +
+
+ |Bottom 3
+ |Switch Output
+ |Switch connection to flight computer
+
+ |Bottom 4
+ |Switch Input
+ |Switch connection to positive battery terminal
+ |====
+
+ === Using a Separate Pyro Battery with EasyMini
+
+ As described above, using an external pyro battery involves
+ connecting the negative battery terminal to the flight
+ computer ground, connecting the positive battery terminal to
+ one of the igniter leads and connecting the other igniter
+ lead to the per-channel pyro circuit connection.
+
+ To connect the negative pyro battery terminal to TeleMini
+ ground, connect it to the negative external battery
+ connection, top terminal 4.
+
+ Connecting the positive battery terminal to the pyro
+ charges must be done separate from EasyMini, by soldering
+ them together or using some other connector.
+
+ The other lead from each pyro charge is then inserted into
+ the appropriate per-pyro channel screw terminal (top
+ terminal 1 for the Main charge, bottom terminal 1 for the
+ Apogee charge).
+
+ === Using an Active Switch with EasyMini
+
+ As explained above, an external active switch requires three
+ connections, one to the positive battery terminal, one to
+ the flight computer positive input and one to ground. Use
+ the negative external battery connection, top terminal 4 for
+ ground.
+
+ The positive battery terminal is available on bottom
+ terminal 4, the positive flight computer input is on the
+ bottom terminal 3.