altosui: Adjust max log setting for storage block size
[fw/altos] / doc / config-device.inc
index 0ca6afff10e296d89e035402e67baf41e3d9ac18..2e3d47d42dce092fe4ea9cbacb0731a60311ae99 100644 (file)
@@ -90,7 +90,7 @@ ifdef::radio[]
                transmission is disabled.
                ifdef::altusmetrum[]
                This option is
-               available on TeleMetrum v2 and TeleMega
+               available on TeleMetrum v2 or newer and TeleMega
                boards. TeleMetrum v1 boards cannot transmit
                APRS packets.
                endif::altusmetrum[]
@@ -118,6 +118,16 @@ ifdef::radio[]
                altitude with Compressed format. Test before
                you fly to see which to use.
 
+       ==== APRS Offset
+       
+               The delay from the top of the minute before sending
+               the first APRS packet of the minute. Coordinating
+               values for this parameter between multiple devices can
+               allow a single receiver to reliably receive APRS
+               packets from multiple devices. Note that this offset only
+               takes effect while the GPS signal is locked so that the
+               transmitting device knows the current time.
+               
        ==== Callsign
 
                This sets the call sign included in each
@@ -233,7 +243,7 @@ ifdef::telemega,easymega[]
        ==== Configure Pyro Channels
 
                .Additional Pyro Channel Configuration
-               image::configure-pyro.png[width="5.5in"]
+               image::configure-pyro.png[width=400]
 
                This opens a separate window to configure the
                additional pyro channels available on TeleMega
@@ -262,6 +272,6 @@ ifdef::telemega,easymega[]
                configuration by pressing the 'Save' button in
                the main Configure Flight Computer window.
 
-               include::pyro-channels.raw[]
+               include::pyro-channels.adoc[]
 
 endif::telemega,easymega[]