+altos (1.8.1-2) unstable; urgency=medium
+
+ * updating packaging to resolve outstanding lintian issues
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 28 Aug 2017 13:08:00 -0600
+
+altos (1.8.1-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * install: Add 'fat-install' target
+ * altos: Perform time comparisons using 16-bit arithmetic to handle wrap
+ * micropeak: Track font changes in raw data display
+ * altosuilib: Add "Huge" font size
+ * altosui: Add --oneline mode to briefly summarize flights
+ * altos: Eliminate separate height error filter for accelerometer devices
+ * altos: Don't eliminate baro above mach speed, just trust it less
+ * altos/test: telemetrum baro data is inverted before being written to eeprom
+ * altos/test: Integrate raw accel to provide speed for comparison
+ * altos/test: Fake baro data for flight 12 serial 2093
+ * altoslib: Remove debug printf for gyro adjust
+ * altoslib: Allow for missing product when checking for mma655x inverted
+ * altoslib: Fix parsing of old TM log GPS sat data
+ * altoslib: Compute speed at entry to each state
+ * altosui: Make --oneline show drogue deploy speed
+ * altoslib: Fix freq preference loading
+ * altos: Don't compute filtered average of height error when HAS_ACCEL
+ * doc: Update for 1.8.1
+ * Version 1.8.1
+
+ [ Bdale Garbee ]
+ * releasing 1.8.1
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 28 Aug 2017 12:06:54 -0600
+
+altos (1.8-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * two more places where telemini-outline.pdf filename needs to be updated
+ * add telemini-v3.0 to list of binaries we stach in LLC repo for production use
+ * telebt-v4.0: initial creation of firmware for new product, no BT yet
+ * telebt-v4.0: add ao_send_packet
+ * telebt-v4.0: don't need the USB pin remapping flag
+ * telebt-v4.0: turn off pin remapping in the flash loader, too
+ * telebt-v4.0: slow down SPI speed to radio chip
+ * telegps-v2.0: slow down radio chip spi speed
+ * telebt-v4.0: make git ignore products of build
+ * ao-tools/ao-makebin: have git ignore built object
+ * telemini-v3.0: make git ignore build products
+ * altos/telebt-v4.0 Set CPU clock to 48Mhz instead of 96Mhz
+ * telegps: use new eeprom reading code
+ * have git ignore ao-bringup/cal_values
+ * telefiretwo: don't try to record pre-burn sensor values in FLIGHT record
+ * initial tests made using Terry's stand with a 2500psi sensor
+ * have AltosGraph use new AltosPressure to get imperial_units working
+ * re-brand current telefiretwo product as telefireone
+ * altoslib: include TimeSeries code in build
+ * add thrust as a graphable time series type
+ * rename existing turnon_telebt script, create a new one for v4.0
+ * clean up telefireone name references
+ * ignore more build products in telebt-v4.0 tree
+ * add TeleBT v4.0 to the list of stuff we build
+ * remove libssl-dev build dependency, only used by test code we don't build
+ * update docinfo file for 1.8 release
+ * releasing 1.8
+
+ [ Keith Packard ]
+ * altos/stmf0: Not all timer configurations use AF2
+ * altos/telemini-v3.0: Fix license
+ * altos/easymini-v2.0: Add EasyMini v2.0
+ * altos: Add telemini-v3.0 and easymini-v2.0 to default altos build
+ * altosui: Ship telemini v3.0 firmware
+ * altos/ao-bringup: Switch turnon_easymini to v2.0
+ * altosui: Add TeleMini v3.0 and EasyMini v2.0 firmware to windows package
+ * Update releasing to add more firmware bits
+ * Ignore ao_lisp_test
+ * altos/telegps-v2.0: git ignore make results
+ * altos/nucleo-32: Add lisp save/restore
+ * ao-bringup: make turnon_telemini search for ao_usbload on $PATH
+ * Fake thrust data as accel for now
+ * micropeak: Add MicroPeak V2 to the download code
+ * altos/ms5607: Allow applications to not use the normal data ring and thread
+ * altos: Adapt micro log to MicroPeak V3
+ * altos: Add 100ms constants for baro Kalman filter
+ * altos: Add header file for ao_report_micro.c
+ * altos/micropeak: Use existing ao_ms5607_current variable
+ * altos/micropeak: Update ao_micropeak.h for MicroPeak v2
+ * altos/stmf0: Compute serial baud rate registers at runtime
+ * altos/stmf0: Make sure systick is off before programming
+ * altos/stmf0: Fix HSI clock rate.
+ * altos/stmf0: Add support for HSI clocked applications
+ * altos/micropeak-v2.0: Add initial MicroPeak v2 support
+ * altos: Build MicroPeak-v2.0 by default
+ * src/kernel: Add GPS lock blink LED to tracker code
+ * altos/kernel: Allow TeleGPS v2 to scale battery in telem
+ * altos/telegps-v2.0: Adjust LED config
+ * altos/telegps-v2.0: Set CPU clock to 48MHz instread of 96MHz
+ * altos/telegps-v2.0: Battery ADC input is on PB1, not PA0
+ * altos/telegps-v2.0: Remove some unneeded defines
+ * altos/telegps-v2.0: GPS chip is connected to serial 2, not serial 1
+ * altos/telegps-v2.0: CC1200 CS is PA1, not PA5.
+ * altos/telegps-v2.0: Reorder initialization sequence
+ * altos/stmf0: Add code to use SoC flash as storage
+ * altos/telegps-v2.0: Disable external serial port to save ROM
+ * altos: Make CDC ACM 'line coding' public
+ * altos: Move 'ao_force_freq' to ao_config.c
+ * altos/telemini-v3.0: Add 'recovery mode' on PA14 (pin 6 on dbg header)
+ * altos/telemini-v3.0: Use dbg connector pin 5 for force bootloader
+ * altoslib: Hide members from json by prefixing with __
+ * altoslib: Add AltosForce and AltosPressure units
+ * altoslib: Add Ms5607 constructor that just takes config_data
+ * altoslib: Add empty constructor for AltosPyro for JSON
+ * altoslib: Add set_config_data to AltosState
+ * altoslib: Add new eeprom management code
+ * altoslib: Compile AltosForce and AltosPressure
+ * altoslib: Hack up AltosEepromFile to support new eeprom code
+ * altosui: Use new eeprom reading code
+ * altoslib: Save eeprom data in new .eeprom format
+ * altoslib: Remove older eeprom handling code
+ * altoslib: Another bit of altoslib for the old eeprom stuff
+ * Use SDP to locate the service channel on Linux
+ * altos: Add RN4678 Bluetooth module driver
+ * altos/telebt-v4.0: Hook up RN4678 module
+ * altoslib: Handle TeleBT v4.0 battery voltage
+ * libaltos: Add support for TeleBT-v4.0 bluetooth channel change
+ * altos/stmf: Fix up serial port flow control configuration bits
+ * altos/ao_rn4678: Send '$$$' for new devices. Fix name setting code.
+ * altoslib: Mark AltosConfigData fields as MISSING until set
+ * altoslib: Set default log format to FULL until we learn different
+ * altoslib: Set default accel cal for old TeleMetrum v1 files
+ * altos/telefireone-v1.0: Fix confusing defines about config storage
+ * ao-bringup: turnon_chaoskey: search for ao-usbload in PATH
+ * altos/telebt-v4.0: Remove HAS_POLLCHAR
+ * altos/telebt-v3.0: Add send_packet command
+ * altoslib: Add initial time series functions
+ * altosuilib: Add time series subclass with data for generating a plot
+ * altoslib: Create new abstraction underneath AltosState for recording values
+ * altosuilib: Start creating new graph interface that takes time series data
+ * altosui: Hacks to plug into the new graph stuff
+ * doc: Add telegps outline
+ * altoslib: Don't store computed telemetry fields
+ * altoslib: Do data analysis on raw values rather than AltosState
+ * altosuilib: Adapt to AltosFlightSeries data processing plan
+ * altosui: Adapt to AltosFlightSeries for data analysis
+ * altoslib/altosuilib/altosui: More work towards using AltosFlightSeries for analysis
+ * altoslib,altosuilib,altosui: Get stats and replay working again.
+ * altoslib: Make AltosReplayReader start synchronously enough to track states
+ * altosui: Remove --cat mode
+ * altoslib: Make sure AltosFlightSeries is filled in before use
+ * altoslib: Get KML export working again
+ * altoslib: Preserve old GPS data during operation
+ * altoslib: Trim stale bits of AltosState
+ * altosui: Remove debug printf.
+ * altoslib: Use cal data temp gps for telemetry data too
+ * altosdroid: Deal with AltosState changes
+ * telegps: Get telegps application working again
+ * altoslib: Change how speed/accel are computed from pressure
+ * altoslib: Allow for other tick sizes
+ * altoslib: Publish boost_time and landed_time from AltosFlightStats
+ * altoslib: Return AltosTimeValue from min/max funcs
+ * altoslib: Provide consistent cal_data from idle and replay readers
+ * altosuilib: Make AltosFlightStatsTable neater
+ * altosuilib: Remove 'cal_data' param from AltosGraphNew constructor
+ * micropeak: Use altoslib/altosuilib flight analysis bits
+ * altoslib: Recover from a couple of API changes
+ * altoslib: Extract a few more values from config to cal_data
+ * altoslib: Create data file open helper in AltosLib
+ * altoslib: Add constants for speed/accel filtering
+ * altoslib: Adjust boost/landed time in flight series for display
+ * altosuilib: Display product/firmware version in stats table
+ * altoslib: Handle eeprom tick wrapping
+ * altoslib: Use first pressure value if no ground pressure available
+ * altoslib: Check for empty gps height series
+ * altoslib: Ignore invalid accel cal values
+ * altoslib: Remove debug printfs
+ * altoslib: AltosFlightSeries ignore missing accel/pressure
+ * altoslib: Clean up gps series logging
+ * altoslib: Only compute state stats for recorded states
+ * altosuilib: Set graph title to include product/serial/flight info
+ * altoslib: Don't record 'pad' state in FlightSeries
+ * altoslib: Reset transient AltosCalData values before processing data
+ * altoslib: When no boost tick is found, just use first tick in file
+ * altoslib: Don't record radio status values in flight series
+ * altoslib: Add status back to AltosFlightSeries for CSV export
+ * altoslib: Check for valid pad alt before computing GPS height series
+ * altoslib,altosuilib: Remove stale source files
+ * altoslib: Compute orientation from eeprom data files
+ * altoslib: Compute 'vertical acceleration' for eeprom files
+ * altoslib, altosuilib, altosui, telegps: Missing config values now MISSING
+ * altos: Update sensor data atomically
+ * altos: HMC5883 output order is X Z Y
+ * altoslib: Adapt to Mag sensor value ordering changes
+ * altoslib: Missing config values now AltosLib.MISSING, not zero or negative
+ * altos: Create separate log format for EasyMini v2.0
+ * altoslib: Handle EasyMini v2.0 ADC values
+ * altoslib: Keep time series in AltosFlightSeries array sorted
+ * altoslib: Fix labels in AltosIMU to match source data
+ * altoslib: Hook up idle monitoring data again
+ * altoslib: Flush igniter fire command
+ * altoslib: Remove unused 'ground_rotation' from AltosState
+ * altosui: Display current altitude in monitor idle Pad tab
+ * altoslib: Initialize new imu/mag values. Remove stale imu/mag objects.
+ * altosui, telegps, altosdroid: say ground distance, not total range
+ * altoslib: Set time for TeleMini v1.0 eeprom analysing
+ * altosuilib: Don't display pad, last location in flight stats without gps
+ * altos: Add timeout to RN4678 status message code
+ * altos/telebt-4.0: Add dependency on RN4678 header
+ * altoslib: Remove old AltosEeprom.java code
+ * altoslib: Rename AltosEepromNew to AltosEeprom
+ * altosuilib: Rename AltosUIGraphNew to AltosUIGraph
+ * altosuilib: Rename AltosGraphNew to AltosGraph
+ * altoslib,altosuilib: Bump library version numbers
+ * altoslib: Make cal_data private in AltosDataListener
+ * altos/rn4678: Add BLE support
+ * altoslib: Clean up quaternion and rotation interfaces
+ * altosdroid: cal_data is no longer public from AltosState
+ * altoslib: Fix comments in AltosQuaternion and AltosRotation
+ * altoslib: Deal with multiple motors in flight stats
+ * altos/stmf0: Initialize UART RTS/CTS before turning it on
+ * altos/telebt-v4.0: Use HW flow control to BT module
+ * Set version to 1.7.1 for TeleBT firmware build
+ * altoslib: fix adjustment of landed time
+ * altos/test: Add EasyMini test mode
+ * libaltos: Add btle test program
+ * altosui: Adapt to flight stats time value changes
+ * altosui: Rename AltosConfig -> AltosConfigFC
+ * altos/test: Fix printf format for int64 arithmetic test
+ * altos/test: Fix AES key format in test code
+ * libaltos: Test both bluetooth and USB APIs with cjnitest
+ * altoslib: Set time in state for KML output correctly
+ * ao-bringup: Allow dfu_util to "fail" while flashing chaoskey
+ * altosui, telegps: Add TeleBT v4.0 firmware to app packages
+ * doc: Add 1.8 release notes
+ * Bump version to 1.8
+ * Note that telebt 4.0 files need to go to altusmetrumllc dir
+
+ [ Miguel Benavidez ]
+ * altoslib: Fix MS5607 raw data to pressure conversion function
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 12 Aug 2017 01:00:11 -0400
+
+altos (1.7-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Fix release note html to remove xml bits
+ * Update pdclib to version using arm-specific 'ar' program
+ * altos/stmf0: Add USART support
+ * altos/nucleo-32: Add basic support for STM32F042 Nucleo-32 board
+ * altos/test: Fix tests
+ * ao-bringup: Improve EasyMini turnon and test scripts
+ * altos/stm: Make ao_usb_set_address static. Saves a bunch of text space
+ * altos/arm: Align data so that gcc 5.4 doesn't do byte-accesses. Add -Wcast-align
+ * Add first lisp bits
+ * altos: Add lisp reader
+ * altos/lisp: Change lisp objects to use ao_poly everywhere. Add const
+ * altos/kernel: Make ao_cmd_readline public. Return char from ao_cmd_lex.
+ * altos/stmf0: Add lisp to include directories
+ * altos/lisp: add set/setq and ' in reader
+ * altos/lisp: Separate out values from atoms
+ * altos: Add lambda support to lisp
+ * altos: Add lambdakey
+ * altos/lisp: Start rewriting eval as state machine
+ * altos/lisp: get builtin macros working again
+ * altos/lisp: Change GC move API
+ * altos/lisp: make sure stack->formals_last gets moved during GC
+ * altos/lisp: more GC issues. add patom
+ * altos/lisp: convert GC to non-recursive
+ * altos/lambdakey-v1.0: Tweak memory allocations
+ * altos/lisp: working on lexical scoping
+ * altos/lisp: macros appear to work now
+ * altos/lisp: Clean up OS integration bits, add defun
+ * altos/lisp: add progn, while, read and eval
+ * altos/lisp: use regular read-eval-print loop for make const
+ * altos/lisp: Make read() return eof atom on end of file
+ * altos/lisp: Improve lisp test program UI
+ * altos/lisp: Deal with memory compation in the middle of operations
+ * altos/lisp: Add towers of hanoi example
+ * altos/lisp: add length, pack, unpack and flush
+ * altos/lisp: Share mark function for mark and move
+ * altos/lisp: Make ao_lisp_ref and ao_lisp_poly non-inline
+ * altos/lisp: Make sure memmove only happens once per object. Other GC fixes
+ * altos/lisp: Add save/restore infrastructure. Needs OS support to work.
+ * altos/lisp: Add save/restore to ao_lisp_test
+ * altos/lisp: Append a CRC to the saved image to validate on restore
+ * altos/lambdakey: Get save/restore working
+ * altos/stmf0: Add a comment about the requirements for using ao_flash_stm
+ * altos/lisp: Change GC to do moves in batches of 32
+ * altos/lisp: Simplify GC a bit by only marking the head of each object
+ * altos/lisp: Cache freed cons and stack items
+ * altos/lisp: Show number of collect calls in ao_lisp_test
+ * altos/lisp: Improve hanoi demo
+ * altos/lisp: Add license to hanoi demo
+ * altos/lisp: Evaluate macros once, then smash them into place
+ * altos/lisp: Get lambdakey and nucleo-32 building again
+ * altos/lisp: remove duplicate 'length' lambda from hanoi example
+ * altos/lisp: re-use small frames
+ * altos/lisp: Do better checking for un-evaluated macros in ROM
+ * altos/lisp: Allow macro/nlambda/lexpr to have multiple args
+ * altos/lisp: Take advantage of multi-arg macros. Add more ROM funcs
+ * altos/lambdakey: Strip out unused code
+ * altos/lisp: remove nth from hanoi.lisp
+ * altos/lisp: Make hanoi example output a bit prettier
+ * altos/lisp: Add incremental collection
+ * altos/lisp: Optimize chunk searching in collect
+ * altos/lisp: Allow empty defun bodies
+ * altos/test: Disable position independent executables
+ * altos/lisp: binary search for chunk in collect
+ * altos/lisp: Eliminate compiler warning about array bounds at -O3
+ * altos/lisp: Clean up hanoi.lisp comments.
+ * altos/lisp: Remove some stale frame debugging checks
+ * altos/lisp: Fix error atom name in ao_lisp_length
+ * altos/lisp: Dump globals on error
+ * altos/lisp: Fix uninitialized values in ao_lisp_make_const
+ * altos/lisp: Compile ao_lisp_make_const -no-pie
+ * altos/lisp: Make lambda, cond and while all have implicit progns
+ * altos/lisp: Take advantage of implicit progn in ROM code
+ * altos/lisp: have 'while' return the last body value
+ * altos/lisp: Take advantage of implicit progns in hanoi demo
+ * altos/lisp: Add continuations
+ * altos/lisp: Make DBG settings global
+ * altos/lisp: Use poly stashes for stacks
+ * altos/lisp: Empty lambda body is not an error
+ * altos/lisp: bounds check in move_map plus binary search
+ * altos/lisp: Build new ao_lisp_stack.c into test and lambdakey
+ * altos/lisp: Sort frames by atom
+ * altos/lisp: Add builtin 'collect'
+ * altos/lisp: Share binary search for memory chunk between mark and move
+ * altos/lisp: Cleanup some DBG defines
+ * altos/lisp: Include memory stats for test program
+ * altos/lisp: Move stack recursion check after null check
+ * altos/lisp: Clean up hanoi.lisp demo a bit
+ * altos/lisp: Tell compiler that the two lisp memory pools are aligned
+ * altos/lisp: Add casts to keep the latest GCC from whinging
+ * altos/lisp: Start adding scheme symbols
+ * altos/chaoskey: use both halves of the CRC
+ * altos: Eliminate printf format warning with long vs int
+ * ao-bringup: Allow serial number on turnon_easymega cmdline
+ * ao-bringup: test-chaoskey needs to use the SerialNumber dmesg line
+ * altos/stmf0: Allow apps to leave interrupt vectors at 0
+ * altos/stmf0: Complain if the SPI configuration isn't complete
+ * altos/stmf0: Allow projects to not use the USB boot loader
+ * altos: Allow applications to define LEDs for ao_report.c
+ * altos: Require SPI speed to be declared for cc1200
+ * altos/stmf0: Add adc and beep support for TeleMini v3.0
+ * altos: Initial TeleMini v3.0 code
+ * altos/telemini-v3.0: Update to second prototype version
+ * altos/telemini-v3.0: Finish initial turn-on
+ * altos: Split out TeleMini v3 log/telem labeling
+ * altos/telemini-v3.0: Swap main and apogee sense pins.
+ * altoslib: Add TeleMini v3 support
+ * altos/cc1111: Remove unneeded initialization in ao_timer.c
+ * ao-tools/ao-usbload: Pad image with 0xff instead of random bits
+ * altos: Don't wait while idle if trying to minimize interrupt latency
+ * altos/stm: Interrupt priority is in the upper bits of the priority mask
+ * altos/stm: Allow use basepri instead of primask for masking interrupts
+ * altos/avr: Avoid warning about unused args in stdio_put and stdio_get
+ * altos: Allow for console to be used for stdio
+ * altos/stm: Allow DMA channels to be hijacked by other code
+ * altos/stm: Make i2c code handle PCLK1 of 24MHz
+ * altos/stm: Add nvic priority register fields. Add more TIM234 defines.
+ * altos: Add bitmap drawing code
+ * altos: Add VGA driver for STM32L processors
+ * altos: Add PS/2 keyboard driver
+ * altos: Add console driver using VGA and PS/2
+ * altos/stm: Add draw and lisp to make search paths.
+ * altos: Add stm-vga demo project
+ * altos/telemini-v3.0: Add beeper defines needed for more general beeper code
+ * altos/stmf0: Support tim1 beeper channel other than 3
+ * altos/stmf0: Support timer 2/3 for the beeper
+ * altos/lisp: Not quite ready to start making it look like scheme yet
+ * altos/nucleo-32: Update lisp files, add beeper support
+ * Add initial TeleMini v3 docs
+ * telemini outline svg had wrong version number
+ * ao-tools/ao-flash-lpc: Adapt to current openocd LPC support
+ * ao-tools/ao-flash-stm: Use openocd instead of st-utils
+ * doc: Rename telemini doc file from telemini-v1.0.inc to telemini.inc
+ * cortexelf-v1: Add ps/2 and vga with graphics
+ * cortexelf-v1: Fix clock to drive VGA at 640/480. Add sdcard, remove others
+ * cortexelf-v1: Hook up serial consoles for debugging
+ * cortexelf-v1: Use new memory map to access all flash and ram. Add fat.
+ * cortexelf: Add lisp interpreter
+ * stm: Use common flash wait loop instead of inlining
+ * lisp: Fix up lisp build so projects can get ao_lisp_const.h built as needed
+ * cortexelf-v1: Add serialblather command.
+ * cortexelf-v1: Add buttons
+ * altos: Add AS1107 LED display driver
+ * cortexelf-v1: Hook up AS1107 in test mode
+ * altos: add button matrix driver
+ * altos: Allow buttons to be high when pressed rather than low
+ * cortexelf-v1: Hook up hex keypad using matrix input driver
+ * cortexelf-v1: Add bit flipping array generator
+ * cortexelf-v1: doodling with 1802 bits
+ * cortexelf-v1: Make bit flipping array constant
+ * stm: Add a few more GPIO functions to make dealing with the 1802 easier
+ * cortexelf-v1: Add pin definitions for 1802 connections
+ * altos: Define CC115L spi speed in each product
+ * telegps-v0.1: Hack up for SDCARD debugging
+ * altos: Disable FAT commands unless requested
+ * altos: Allow programs to enable SDCARD debugging if desired
+ * stm: Add more mask-based GPIO controls
+ * cortexelf-v1: More 1802 noodling
+ * ao-elftohex: Add conditions for skipping ELF sections
+ * altos: Place AS1107 in 'normal' mode at end of init sequence
+ * altos: Drive row low instead of high in matrix driver
+ * altos: Document a few more SPI mode bits in VGA driver
+ * altos: Escape lisp REP loop with () input
+ * altos: Use MP switch in cortexelf boot loader for force loader mode
+ * cortexelf-v1: Bump SPI pin speed to 40MHz to for sdcard. Fix VGA DMA.
+ * cortexelf-v1: Initialize key matrix code
+ * altos/telegps: Inherit LDFLAGS from lpc make specification
+ * cortexelf-v1: Fetch data at TPB rising when MWR or MRD are low
+ * altos/stmf0: Split up rom load in altos.ld to make linker happy
+ * telegps-v2.0: Remove fec_tx code and ADC logging.
+ * altos/telefiretwo-v0.2: Add AO_CC1200_SPI_SPEED
+ * altos/telebt-v3.0: Add LCO bits for testing
+ * altos/telemini-v3.0: Update to production hardware
+ * altos/telemini-v3.0: Add flash loader
+ * ao-test-baro: Be more lax about altitude checks
+ * altos/lpc: Fix up Makefile definitions
+ * altos/lpc: Add (void *) cast to fix alignment warning
+ * altos/telemini-v3.0: Remove vestiges of the pre-USB code
+ * altos/lpc,altos/stmf0: Use -n flag to work around link editor issue
+ * alots/stmf0: Fix vpath entry for AES directory
+ * doc: Update TeleMini v3 photos to production unit
+ * Replace turnon_telemini with v3 version. Add test-teleminiv3
+ * altos/lpc: Really fix aes entry in lpc vpath
+ * doc: Finish updates for v1.7
+ * altos/stmf0: Pull beeper pin low when beeper is off
+ * altoslib: Add TeleFireTwo eeprom support
+ * altos: Move old AO_LAUNCH defines to cc1111/ao_launch.h
+ * doc: Errors in the TeleMini v3.0 updates found by Bdale
+ * altos/ao_pad.c: Use #if HAS_LOG instead of #ifdef HAS_LOG
+ * altoslib: renamed AltosSensorTMini2, but didn't update AltosIdleFetch
+ * Bump to version 1.7
+
+ [ Bdale Garbee ]
+ * augment TeleDongle turn on script to support serial number on command line
+ * stop using /usr/share for binaries in remaining turnon scripts
+ * use elf, not ihx
+ * first rough cut at skeleton of code for pnpservo .. altos boots and runs
+ * initial skeleton of CortexELF support
+ * makefiles too
+ * capture pnpservo makefiles too
+ * initial cut at telegps-v2.0 firmware
+ * copy telefiretwo-v0.2 to start firmware for v1.0
+ * builds, loads, runs, not very useful yet
+ * need top level Makefile too
+ * add new ADC channels for telefiretwo
+ * fix TeleFireTwo product name in ao-list output
+ * enable spi flash on telefiretwo
+ * fleshing out logging for telefiretwo
+ * a stab at turning on rudimentary logging for telefiretwo
+ * cobble up a command to toggle logging on/off on TeleFireTwo
+ * enable logging support in telefiretwo
+ * add static test start and stop commands to radio protocol for telefiretwo
+ * eliminate spurious close braces
+ * implement static test start and stop protocol for telefiretwo+telebt
+ * allow multiple tests to be logged on telefiretwo without rebooting
+ * update copyright year in docs
+ * update ChangeLog for 1.7 release
+
+ [ Richard Hughes ]
+ * altos/chaoskey: Add a metainfo for the ChaosKey
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 24 Apr 2017 18:22:58 -0600
+
+altos (1.6.8-5) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altos/lpc,altos/stmf0: Use -n flag to work around link editor issue,
+ closes: #860601
+ * ao-elftohex: Add conditions for skipping ELF sections
+ * ao-tools/ao-flash-lpc: Adapt to current openocd LPC support
+ * altos/telegps: Inherit LDFLAGS from lpc make specification
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 22 Apr 2017 12:07:57 -0600
+
+altos (1.6.8-4) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altos/arm: Align data so that gcc 5.4 doesn't do byte-accesses. Add -Wcast-align
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 25 Jan 2017 12:22:30 -0700
+
+altos (1.6.8-3) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altos/stm: Make ao_usb_set_address static. Saves a bunch of text space,
+ closes: #844816
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 13 Dec 2016 00:19:44 -0700
+
+altos (1.6.8-2) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Update pdclib to version using arm-specific 'ar' program, closes: #838357
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 02 Oct 2016 17:49:32 -0600
+
+altos (1.6.8-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * updates made during 1.6.5 release process
+ * remove debian/ from master branch, it should live only on the debian branch
+ * reinstate debian/ content on the debian branch only
+ * update to latest Debian standards version
+ * update Changelog for release
+
+ [ Keith Packard ]
+ * Switch from GPLv2 to GPLv2+
+ * altos: Add telemetrum v3.0
+ * Bump version to 1.6.5.1 after 1.6.5 release
+ * altosuilib: Show indicator when they switch from invalid back to valid
+ * altos: Add STM32F0 beep and SPI byte API.
+ * altos: Keep telemetry and command output from interleaving
+ * altos: Don't access cc1120 SPI bus during recv after abort has started
+ * fixup for interleave
+ * altos: Expose cc1200 radio test functions for telemini bringup
+ * altos: Don't switch to flight 0 when log fills in flight
+ * altos: Stop building cc1111-based telemini v2.0 firmware
+ * altoslib: Add a 'seconds' method to AltosGPS
+ * altos: Add 'ao_button_get' to button driver
+ * altos: Make telelcotwo control two boxes instead of two pads
+ * altos/stmf0: Hook up clock output support
+ * altos/stmf0: Clean .bin files from flash-loader dirs
+ * altos: Use standard FIPS testing for chaoskey
+ * ao-chaosread: Add --infinite and --bytes options
+ * ao-chaosread: Eliminate double-free when serial match fails
+ * ao-bringup: Test chaoskey using dieharder
+ * ao-bringup: Use released files for chaoskey turnon
+ * Bump to version 1.6.6
+ * ao-bringup: Add colors to chaoskey test result reporting
+ * altos: Flash all LEDS during power on
+ * altos/stmf0: Switch ADC fast to ADC clock
+ * Bump verison to 1.6.7
+ * ao-chaosread: Parse -i and -b options
+ * ao-usbload: Check target device name to avoid mis-flashing
+ * altos/cc1120: remove unused status from ao_radio_fifo_write_stop
+ * ao-bringup: telemega allow serial on command line, loop on accel fail
+ * ao-tools/ao-cal-freq: --verbose option has no parameter
+ * altosui: Deal with connect failure in AltosConfigTD
+ * ao-bringup/turnon_telemetrum: serial on cmd line. Loop on accel fail
+ * ao-tools/ao-usbload: Fix -f flag, remove debug hacks
+ * ao-tools/ao-cal-freq: Re-open usb device each try
+ * Bump version to 1.6.7.1
+ * altos/stm: Make ao_spi_duplex out pointer const
+ * altos/stm: Create funcs to set SPI DMA parameters
+ * altos/stm: Set MISO DMA priority to HIGH to avoid OVR
+ * altos/stm: Set i2c recv DMA to HIGH
+ * altos/stm: Set SPI slave DMA priority to HIGH/VERY_HIGH
+ * Add 1.6.8 release notes
+ * altosui: Don't ship TeleMetrum v3.0 firmware (yet)
+ * Bump version to 1.6.8
+ * Remove pyro wizard file from master
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 05 Sep 2016 21:02:09 -0600
+
+altos (1.6.5-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * doc: Add install-html script
+ * Bump android version to 13
+ * ao-tools/ao-chaosread: Document length (-l) option
+ * altosdroid: Deal with multiple installed android SDKs
+ * Mark testing version 1.6.4.1
+ * altosui: Deliver firmware for Tmega 2.0 and TBT 3.0 for Windows too
+ * altos: Block interrupts while waking tasks sleeping on timers.
+ * altos: Move comment in ao_sleep_for next to related code
+ * altos/stm: remove ao_dma_abort
+ * altos/stm: use 0xff for dma mutex value for allocated mutexes
+ * altos/stm: Add more SPI status register bits
+ * altos/stm: Change ao_spi_send_sync definition to take const source
+ * altos: Add STM DMA debugging
+ * altos: Add STM SPI debugging
+ * altos/stm: move spi execution to common ao_spi_run
+ * altos/stm: Clean up spi_enable/disable_index functions
+ * altos/stm: Add better byte-level SPI api
+ * altos/drivers: Use more reliable byte interface for CC1120 reception
+ * altos: Add debug check for irq block when editing task queues
+ * altos: cc1200: use FIFO threshold pin output for APRS buffering
+ * altos: Make ao_delay(0) not wait forever
+ * altos/telemini-v2.0: Remove show tasks command
+ * altos: Make task list output more useful
+ * altos/stm: clean up ao_exti_enable
+ * altos: Leave USB enabled in flight with -DDEBUG=1
+ * altos: Use FIFO_THR pin for cc1120 transmit buffering
+ * Bump to testing version 1.6.4.2
+ * altos/cc1111: Remove 'show tasks' command
+ * Bump to 1.6.5. Add preliminary release notes
+ * Credit Chuck Haskin for helping fix the SPI bug.
+ * doc: Build 1.6.5 release notes
+
+ [ Bdale Garbee ]
+ * switch libgtk-3-bin build-dep to gtk-update-icon-cache, closes: #825455
+ * updating ChangeLog for 1.6.5 release
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 04 Jul 2016 23:48:50 +0200
+
+altos (1.6.4-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altos/cc1111: Use SW to drive UART RTS pin
+ * Bump version to 1.6.3.1
+ * altosui/telegps: Ship firmware for new hardware
+ * altosdroid: Check for closed before writing/reading bluetooth
+ * Publish firmware with keithp-fat
+ * Add TeleMega to spec list. Add TeleGPS RF output.
+ * altoslib: Switch distance from m/ft to km/miles for large values
+ * altoslib: Remove some debug printf calls
+ * altosuilib: Rate limit map loading pacifier updates
+ * altoslib: Allow map preloading to be aborted
+ * altosdroid: Rate limit map loading pacifier
+ * altosuilib: Don't flicker missing voltages when changing units
+ * doc: Start update for 1.6.4
+ * altoslib: Clean up map file and url handling
+ * altosdroid: make disconnect stick past pause/restart
+ * altoslib: Get rid of AltosMap from AltosMapLoader
+ * telegps: Adapt to distance units switching changes
+ * Bump android app version
+ * Bump java library versions
+ * Automatically run 'git submodule update' if necessary
+ * altosui/telegps/micropeak: Handle both MULTI_LIB and non-MULTI_LIB builds
+ * altoslib: Store common frequencies in library version-independent form
+ * altoslib: Store saved state in version-independent format
+ * altoslib: Allow empty values in AltosHashSet representation
+ * altoslib: Set version and log space from AltosIdleFetch
+ * altoslib: Add log_space to AltosState
+ * altoslib: Add AltosIdleReader
+ * telegps: Use log_space when flight_log_max is missing
+ * telegps: Add monitor idle mode
+ * altoslib: use miles for distances > 1000ft.
+ * altosuilib: Have map preload respond to units and font size changes
+ * altosuilib: Rename AltosUIMap*New.java to AltosUIMap*.java
+ * doc: pad/idle indicator table was busted
+ * altosuilib: Fill preload map on site or lat/lon change
+ * altosuilib: Only display map debugging when serial_debug is enabled
+ * telegps-v1.0: Document how SN 1959 was fixed
+ * stmf0: Clear all USB state when resetting chip. Wakeup all sleepers
+ * stmf0: Do not send more data than requested for GET_DESCRIPTOR
+ * altos/lpc: Handle USB reset by resetting internal state
+ * altos/stm: Handle USB reset in STM32L usb driver
+ * altos/cc1115l: Reduce trace buffer size
+ * altos/stmf0: Rework the sram allocation to save a few text bytes
+ * altos/stmf0: Remove ao_usb_free
+ * altosdroid: Auto save freq changes on 'ok'
+ * altosui: Remove missing items from --summary output
+ * altosuilib: Track open frames, exit when none remain
+ * altosui: Don't open command window when --graph is provided
+ * doc: Updates to 1.6.4 release notes.
+ * altoslib: Switch preserved state format to JSON
+ * altoslib: Remove AltosHashSet code
+ * altoslib: Add null constructors to AltosQuaternion and AltosRotation
+ * altoslib: Add JSON-based object saving/restoring code
+ * altoslib: Use reflection JSON code for frequency preferences
+ * altoslib: Improve AltosState save/restore debugging
+ * altoslib: Get rid of manual JSON encoding stuff
+ * altoslib: Add null constructor for AltosCompanion
+ * altoslib: Add construction for remaining primitive array types to JSON
+ * altoslib: Add back some JSON exception debugging printfs
+ * altosui: Print filename before attempting to parse in --summary mode
+ * altoslib: Stop reflective JSON class walk at Object instead of null
+ * Bump version to 1.6.4
+
+ [ Bdale Garbee ]
+ * process updates made during 1.6.3 release cycle
+ * extend "ok" temp range to 40C, since battery charger on bench can drive temp above 35C at times in Bdale and Robert's production testing
+ * releasing 1.6.4
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 17 Jun 2016 10:02:32 -0600
+
+altos (1.6.3-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Releasing: Copy TeleMega v2.0 bits to Binaries
+ * src/chaoskey-v0.1: Add HV enable support
+ * altos/chaoskey: Add support for flipping between raw and cooked bits
+ * altos/chaoskey: Delay ADC reading for 250ms at startup
+ * altos: remove blank line in stmf0/ao_timer.c
+ * altos/stmf0: Allow projects to specify non-default stack size
+ * altos: Add power management APIs
+ * altos/stmf0: Add suspend/resume support
+ * altos: Allow USB drivers to skip CDC-ACM -specific descriptors
+ * altos: Add power management to TRNG driver
+ * altos/chaoskey-v0.1: Add power management and change USB classes
+ * altos: Delay TRNG ADC long enough for HV supply to stabilize
+ * altos: Add simple stats test to TRNG code
+ * altos/stmf0: Add missing ao_gpio.c
+ * altos: Another fix for non CDC-ACM devices
+ * altos/stmf0: Fix location of device_id register
+ * altos/chaoskey: Encode both hardware and software versions in product ID
+ * altos/stmf0: Use device ID as usb serial number if requested
+ * altos/chaoskey: Use SoC device ID as serial number
+ * altos/chaoskey: Add another USB endpoint to read raw data
+ * altos: Add ChaosKey v1.0 product
+ * ao-bringup: Switch to v1.0 for chaoskey
+ * ao-tools: Add ao-chaosread
+ * altos/stmf0: Fix build without second USB IN endpoint
+ * libaltos: jni_md.h moved to linux subdir in Java install
+ * libaltos: Add unistd.h to get defines for various syscalls
+ * altos: Expose fast timer API from kernel/
+ * Change how we detect and install java
+ * ao-tools/ao-dump-up: Remove spurious flight state strings
+ * ao-tools/lib: Remove trailing whitespace from ao-elf.c
+ * ao-tools/lib: Add ao_hex_image_cat function
+ * ao-tools: Add ao-makebin
+ * altos/stmf0: Construct .bin files for flash loaders
+ * ao-bringup: Use dfu-util to install flash loader on chaoskey
+ * libaltos: Add Windows BT support. Split into separate source files.
+ * altosui: Delay between polling for igniter status in Fire Igniters
+ * altosuilib: Note that Windows now supports Bluetooth
+ * libaltos: Fix warning in linux libaltos code
+ * altoslib: use env var LAUNCH_SITES to override default URL
+ * altosuilib: Control map debugging output with Serial.debug
+ * altosui,telegps: Do not allow radio calibration to be edited
+ * altos/stm: Run scheduler code on interrupt stack
+ * altos/stm: Validate current task SP in interrupt by looking at PSP
+ * altos/stm: Allow apps to define different stack size
+ * altos/lpc: Add fast timer
+ * altos: Add one-byte SPI output routine for LPC and STM cores
+ * altos: Allow for flight hardware without any ADC values
+ * altos: Add Detherm log format (easymini without ADC)
+ * altos: Use mini logging for detherm, just without ADC
+ * altos/stmf0: Add SPI driver.
+ * altos/stmf0: Support HPE clock source
+ * doc: Note that EasyMega and TeleMega report A-D continuity
+ * altos: Add detherm product
+ * altos/stmf0: Add pwm and exti drivers
+ * altos: Add ao_gpi_set/clr_bits functions
+ * altos: Add easy mini plotting helper in test code
+ * altos/detherm: Add ms5607 to detherm
+ * altos/detherm: Add servo driver
+ * altos: Support telefire products in cc1200 driver
+ * altos: Add pad support for new telefire versions
+ * altos: telefiretwo-v0.1 bits
+ * altos: Allow for pad boxes with different sensor configurations
+ * altos: Support pad/lco boxes with fixed box numbers
+ * altos: Add TeleLCOTwo firmware
+ * altos: Fix telefiretwo .gitignore
+ * altos: Add ao_lco_two.c; alternate LCO interface code
+ * altos: Use simpler debounce logic for buttons
+ * altos/telelcotwo: Add idle timeout
+ * Add TeleFireTwo v0.2 project
+ * altos/stmf0: Fix external interrupts
+ * altos/telefiretwo-v0.2: Change alarm names in comment
+ * altosdroid: Don't set target location if lat/lon is MISSING
+ * altoslib: Add debugging to AltosPreferences.state() etc
+ * altoslib: Make AltosGPSSat implement Serializable
+ * altoslib: switch from keySet() to keys() in altos map tiles
+ * altos: avoid mixed declarations and code in ao_task.c
+ * Update java library version numbers
+ * AltosDroid play store keys have moved, update configure.ac
+ * Prepare for new Android release by updating version number
+ * libaltos: Fix for Mac OS X El Capitan
+ * Add preliminary 1.6.3 release notes
+ * altosdroid: Can only use message once
+ * Bump version to 1.6.3
+ * altosdroid: Track device location in app, not telemetry service
+ * altosdroid: Redraw offline map when my location changes
+ * altosdroid: Run even without Bluetooth
+ * altoslib: Use feet per second for imperial speed
+ * altoslib: Report exceptions caught while opening launch sites URL
+ * altoslib: Don't try to drag lines around until map is loaded
+ * Debug bits for telebt
+ * altos: Use TXE instead of TC for serial on STM32l
+ * altos/stm32l: Add support for software-driven HW flow control
+ * altos/telebt-v3.0: Flip CTS/RTS pins for BT module
+ * altos: Clear packet queue when starting packet master
+ * altosdroid: Add idle mode monitoring, reboot. Start igniters
+ * altosdroid: Split setup functions to separate dialog
+ * Fix key in AndroidManifest.xml.in
+ * altosdroid: Add configurable frequency set
+ * altoslib: Make AltosPreferencesBackend abstract. Add set/put Serializable
+ * doc: Add idle mode info to 1.6.3 release note
+ * Revert "altos/stm: Run scheduler code on interrupt stack"
+ * altosdroid: max height is a height, not a speed
+ * altoslib: Correct stats for flights without a real landing
+ * altoslib: Flush during set_state. Don't store listener state.
+ * publish AltosDroid in keithp-fat target
+ * altoslib: Deal with TeleMetrum v2.0 MMA6555 being inverted
+ * altos: Make sure AO_MMA655X_INVERT is declared where needed
+ * doc: Update AltosDroid chapter for 1.6.3
+ * doc: 1.6.3 release notes note TeleBT rts/cts and TM 2.0 monitor idle fixes
+ * micropeak: Change order of windows install so that java detect works
+ * altoslib: Fix map preloading callbacks, run in separate thread
+ * windows: Change install to look for browser in a different place
+ * Ignore some built files for 1.6.3
+
+ [ Robert Garbee ]
+ * fix argument to ao-cal-freq so devices other than /dev/ttyACM0 work
+
+ [ Bart Massey ]
+ * Clean up stmf0 adc init.
+ * altos: Fixed timing of panic display LED to be readable
+
+ [ Justin Vreeland ]
+ * Fix java class differing only by case
+
+ [ Bdale Garbee ]
+ * add beep to TeleMega turnon script
+ * releasing 1.6.3
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 06 May 2016 18:14:11 -0600
+
+altos (1.6.2-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * process updates from 1.6.1 release
+ * move turnon_teledongle to new cal-freq code
+ * add a paragraph about TeleBT battery charging to AltosDroid chapter in documentation
+ * turnon script for TeleBT v3.0
+ * apply wrap-and-sort to control files
+ * add automatic Bluetooth functionality check to turnon_telebt
+ * new build dependency on asciidoc
+ * now building for m4, too
+ * modify bringup scripts to handle TeleMega v2.0
+ * modify release procedure to reflect Keith setting version in confgure.ac
+ * submodule madness
+ * one more time, with feeling .. this time, I've updated pdclib
+ * update Changelog from git log
+
+ [ Keith Packard ]
+ * altoslib: Add companion telemetry data support
+ * ao-telem: Add companion packet telemetry data printing
+ * altos: Add HAS_COMPANION to new boards with companion connectors
+ * altos/telefire: No reply for ARMED. Ignore time for FIRE.
+ * altos: Provide direct segment driving interface for LCD displays
+ * altos/telelco: Infrastructure changes for drag racing
+ * altos/telelco: Add drag race UI
+ * altoslib: Hide 'state' member and use accessor function
+ * altoslib: Rotation off by factor of two
+ * altos/telelco: Adjust drag race UI
+ * altosdroid: Add minus sign and decimal point to lat/lon input fields
+ * altosuilib: In display thread, set new state synchronously
+ * altoslib: Make sure .eeprom download file is flushed on exception
+ * Bump release number to 1.6.1.1
+ * altoslib: Clean up remaining direct AltosState.state users
+ * altoslib: Keep downloading when a parse error occurs
+ * Create directory on keithp.com when uploading devel version
+ * telelco: Fix pad reset to one on radio signal loss
+ * doc: Force FOP to read images from doc directory
+ * doc: Start doc transition to asciidoc
+ * doc: Add asciidoc telemini v1.0
+ * doc: Lots more conversion from docbook to asciidoc
+ * doc: Add asciidoc version of altosui chapter.
+ * doc: Add asciidoc version of Altos Droid manual
+ * doc: Add updating firmware and using am products asciidoc bits
+ * doc: Add titles to all figures
+ * doc: Finish converting docs to asciidoc format
+ * doc: Convert AltOS doc to asciidoc
+ * doc: Convert telemetry and companion docs to asciidoc
+ * doc: Minor makefile cleanups
+ * doc: Switch to free fonts. Publish fonts with docs.
+ * doc: Place html book contents on left side of page with separate scrollbar
+ * doc: Split revhistory to separate file for html docs
+ * doc: Get images and tables all centered and labeled
+ * doc: Make pdf titles less ridiculously large
+ * doc: verbose mode for a2x
+ * altosui: telemini outline pdf changed name
+ * doc: Add product logos to books
+ * Break out common pieces from TeleGPS and AltusMetrum
+ * doc: Reformat 'Using MicroPeak' section
+ * doc: Provide more actual links instead of just chapter names
+ * doc: Move pad beeps table to usage chapter
+ * doc: Reformat html versions a bit
+ * doc: Split out EasyMini into a separate manual
+ * doc: Try a different trick for asciidoc build issues
+ * doc: Construct html index for documentation
+ * doc: Remove some bogus bits from am.css
+ * ao-tools/ao-dbg: Stop using sigvec
+ * altos: Add TeleMega v2.0, including PWM driver
+ * altos: Get stm32l pwm driver working
+ * altos: Set AO_PWM_TIMER_SCALE for telemega-v2.0
+ * Switch TeleMega v2.0 to CC1200 radio chip
+ * altos: Insert inter telemetry-packet delay
+ * Elide pyro channel information from EasyMini docs
+ * Elide flight computer info from APRS section of TeleGPS manual
+ * altoslib: Remove debug message from AltosMap
+ * Update java library versions
+ * Add release notes for 1.6.2
+ * altos: Set TeleMega v2.0 PWM to support servos
+ * altos: Switch PWM constants to end up exposing µsec
+ * Bump version to 1.6.2, altosdroid to 10
+ * doc: Update copyright year in altusmetrum doc
+ * doc: fix typo in using external active switch circuit section
+ * doc: Remove telemini v2.0. Add telemega v2.0
+ * doc: Remove extraneous 'first off' from legal paragraph
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 10 Jan 2016 19:11:18 -0700
+
+altos (1.6.1-1) unstable; urgency=medium
+
+ [ Bdale Garbee ]
+ * swap names so v3.0 is the default TeleDongle version to turn on
+ * add debian branch spec to vcs-git: line in control so Debian tools work right
+ * changelog for 1.6.1 release
+
+ [ Tom Marble ]
+ * Minor typo in man page
+ * Added continuous output option to ao-usbtrng
+
+ [ Keith Packard ]
+ * altos/stmf0: Add ao_crc_stm.c
+ * altos: Replace ao_alarm/ao_clear_alarm with ao_sleep_for
+ * altosui: Run all igniter status requests from non-GUI thread
+ * altosuilib: Detect pair programming by product name, not USB id
+ * ao-bringup/turnon_telemini: Detect which programmer to use by $USER
+ * altos: embed ao_alarm and ao_clear_alarm in ao_sleep_for
+ * altos/cc1200: Adjust bit-sync configuration
+ * altos: Remove some accidental debug printfs from ao_packet.c
+ * ao-bringup: Changes for telebt for keith's hacking
+ * altosdroid: Lots of bluetooth connection changes
+ * altosdroid: Explicitly disconnect BT on termination or 'disconnect'
+ * altosdroid: Only speak when GUI is running
+ * altosdroid: Missing file: DeviceAddress.java
+ * altosdroid: Ignore automatic tab changing while activity is saved
+ * altos: Allow software to offer other USB interface classes than CDC
+ * altos/stmf0: Fix fast ADC interface
+ * altos/stmf0: Typo in ao_crc_stm.c
+ * altos/stmf0: Allocate USB buffers at startup
+ * altos: Create chaoskey product
+ * altos: Add chaoskey flash loader
+ * altos/usbtrng: Split out random number generating code to separate driver
+ * altos: Make APRS format (compressed/uncompressed) configurable
+ * altosui/telegps: Add config option for APRS format
+ * altoslib: Round frequency when configuring radio
+ * ao-tools: Add ao-flash-stm32f0x
+ * altos: Wait for BT disconnect before sending command
+ * altos: Missing pad field in TMv2 data packet
+ * altosui/telegps: Change from variable-units snuck into master
+ * altosdroid: Deal with bluetooth connection failures better
+ * doc: Update telemetry docs to include new packet formats
+ * altos: Add .gitignore for chaoskey
+ * altos: Build chaoskey by default
+ * altos: Add makefile for chaoskey flash loader
+ * altos/stmf0: Need ao_exti.h for pin configuration
+ * altosui: Add map to MonitorIdle display
+ * ao-tools/ao-mega: Clean up formatting of pyro status messages
+ * altos/test: Make aprs test code compile again
+ * altos/test: Support old telemega eeprom file formats in ao_flight_test
+ * ao-tools/ao-list: Show devices that have no TTY
+ * altos: Add the ability to configure a different USB vendor ID
+ * altos/chaoskey: Set USB VID/PID to 0x1d50/0x60c6
+ * altos/stmf0: Have fast ADC ring buffer code use wrap-around
+ * icon: Convert windows stub into launcher program
+ * windows: Use new windows stub to launch applications
+ * altosdroid: Add USB support for TeleDongle/TeleBT
+ * altosdroid: Fix tab label height problems
+ * altoslib: Use Locale.ROOT for KML export
+ * altoslib: Expose locale and non-locale floating point parsing functions
+ * altosui: Remove un-implemented --fetchmaps argument
+ * ao-dump-up: Add --wait option to make testing µPusb easier
+ * doc: Clarify what 'after motor' means
+ * altos: Support 32MHz xtal on cc1200
+ * microsplash: Add 'publish' target to Makefile
+ * micropeak: Use fast load mode by default in -load script
+ * Flip version to 1.6.0.2
+ * altoslib: Create display-independent map support code
+ * telefire: Make 'good' RSSI value configurable
+ * altos: Only set CMAC RSSI value on valid packet received
+ * telefire: Report telefire battery voltage over telemetry link
+ * altos: Add telelco v0.3 (v0.2 with cc1200 instead of cc1120)
+ * altos/telelco: Display telefire battery voltage
+ * altos/telelco: Show box voltage with pad knob instead of firing button
+ * altoslib: Build AltosVersion.java in configure.ac
+ * altoslib: Get new abstract mapping code compiling
+ * altoslib: More frobbing with new map bits
+ * altoslib/altosuilib: Update library version to 7
+ * altoslib/altosuilib: Get new Map display code running in altosui and telegps
+ * altosuilib: Add AltosUIImage.java
+ * altosuilib: Use new map code for map preload UI
+ * altosuilib: Remove old map bits
+ * altosuilib: Get rid of AltosUIVersion.java
+ * altosdroid: Add offline map tab
+ * altosdroid: Move pause before reopening bluetooth into connec thread
+ * altosdroid: Centralize debug printf code
+ * altosdroid: Place icons on screen instead of drawing path
+ * altoslib: Add AltosLaunchSite bits
+ * altosuilib: Use altoslib site list loader
+ * altoslib: Start with map empty
+ * altoslib: Provide toString method for AltosLatLon
+ * altoslib: Add map loading helper class
+ * altosuilib: Switch to altoslib map loading code
+ * altosuilib: Get rid of AltosUIMapNew.set_load_params
+ * altosuilib: Eliminate extra MapCache in AltosUIMapPreloadNew
+ * altoslib: Pass all map loader params to set_load_params
+ * altosdroid: Add map types and map preloading UIs
+ * altosdroid: Look for zipalign in the new place too
+ * altosdroid: Disable debug output on release builds
+ * altosdroid: Save selected map type in AltosDroid object
+ * altosdroid: Add 'Current Location' as an option when preloading maps
+ * altosdroid: Split out AltosMapView into separate file
+ * altosdroid: Missing call to super.onDetach from TabMapOffline
+ * altosdroid: use 'show' to set new tab contents in onResume
+ * altoslib: Require 'debug' hook in AltosMapInterface
+ * altosdroid: Switch from custom title to standard Holo theme
+ * altosdroid: Highlight age in red when older than 10 seconds
+ * ao-tools: Create ao-cal-freq
+ * ao-bringup: Use new ao-cal-freq program for cal-freq script
+ * ao-bringup: Do telegps freq cal before testing GPS
+ * ao-tools: Add missing ao-cal-freq man page
+ * altoslib: Add preferences for saving/restoring multiple flight states
+ * altosdroid: Add multi-tracker support
+ * altosdroid: Note recent changes
+ * altosdroid: Resource changes needed for multi-tracker mode
+ * altoslib: Set product for idle monitor
+ * altoslib: Let the application disable the link cancel dialog
+ * altoslib: Expose public function to set state.product
+ * altoslib: Remove debug output from AltosMap
+ * altosuilib: Show state.product if state.device_type isn't set
+ * altosuilib: Create grid-bag helper functions in AltosUIFrame
+ * micropeak: Update mac/windows FTDI drivers
+ * telegps: use new AltosUIFrame constraint helper
+ * ao-bringup: Fail turnon_easymega if accel cal fails
+ * ao-bringup: Use local versions of tools instead of /usr/bin for turnon_easymega
+ * ao-bringup: Make turnon_easymega run without 'make install'
+ * altoslib/altosuilib: Fix equals methods, add hashCode
+ * altoslib: Clean up map tile removal
+ * altosuilib: Allow for no transform in map mouse wheel function
+ * altosdroid: Switch trackers automatically when changing freq or baud
+ * altosdroid: Remove debug
+ * altosdroid: Support for sorting rockets by age
+ * altosdroid: Stack map markers with newest rocket on top
+ * altosdroid: Multiple tracker support for google maps
+ * altoslib: Add set_zoom_centre to AltosMap
+ * altosuilib: Use AltosMap set_zoom_centre instead of in-line version
+ * altosdroid: Use AltosMap set_zoom_centre
+ * altosdroid: Show receiver battery voltage in the 'pad' view
+ * altosdroid: Add map source preference
+ * altosdroid: Display online/offline maps in same tab
+ * altosdroid: Get rid of on-line only maps tab
+ * altosdroid: Select tracker by clicking on map
+ * altosdroid: Switch to four tabs (pad/flight/recover/map)
+ * altosdroid: Allow tracker selection from online map widget
+ * altosdroid: Mark four-tab change done
+ * altosdroid: Fix line drawing to old tracker location
+ * altoslib: Use a longer filter for descent values
+ * altosdroid: Show direction to target in recover tab
+ * altosdroid: Define strings for the tab names
+ * altosdroid: Change voice output around
+ * altoslib: Typo slipped into AltosState.java
+ * altosdroid: Make sure whole flight state is spoken even when no-one is moving
+ * altosdroid: Make sure flight voice output always starts with 'speed'
+ * altosdroid: Mark tab-dependent voice output as done
+ * altosdroid: Update version numbers in manifest
+ * Bump version to 1.6.0.3
+ * altoslib: Fix replay to run in realtime again
+ * altosdroid: Display direction in map view
+ * altosdroid: Class of offline map view widget changed
+ * altoslib: Don't crash if dragging a map view without any tiles
+ * altos/telebt-v3.0: Report battery voltage correctly
+ * altoslib: Support TeleBT v3.0 battery voltage conversion
+ * altosuilib: Receiver battery voltage lives in listener_state
+ * altosui: Correctly show/hide receiver battery value
+ * telegps: Add receiver battery to Status display
+ * altoslib: Make AltosMap floor/ceil static. Check transform in paint
+ * altoslib: Make earth size constants public
+ * altoslib: Limit simultanous map tile downloads to 128
+ * altoslib: Convert longitude from distance in AltosMapTransform
+ * altoslib: Preload maps based on distance rather than number of tiles
+ * altosdroid: Keep speaking even when screen is off
+ * altosdroid: Pop up menu of nearby trackers on map click
+ * altosdroid: Remove a debug line in AltosVoice
+ * altosdroid: Don't disconnect from bluetooth onStartCommand
+ * altosdroid: Add other igniter status, various other layout changes
+ * Generate Android version info from configure.ac
+ * altosdroid: Note time at startup to avoid flipping trackers
+ * altosdroid: Add 'Auto' to map tracker list
+ * altosdroid: Clean up tab layout
+ * altosdroid: Cleanup Makefile.am
+ * Bump version to 1.6.0.4 (android version 8)
+ * doc: Update for 1.6.1
+ * Bump configure.ac versions to 1.6.1
+ * Bump Java library versions
+
+ [ Robert Garbee ]
+ * add beep when test completes
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 16 Jul 2015 13:38:22 -0600
+
+altos (1.6-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altoslib: Stop re-loading previous flight when starting telemetry monitoring
+ * telegps: Was mis-configuring the 'Configure Device' dialog
+ * altos: Fix ability to disable telemetry by setting interval to 0
+ * altos/test: Add TMv2 test program to .gitignore
+ * altos: Add smaller altitude table file to .gitignore
+ * altos: Make sure we don't beep out continuity twice in idle mode
+ * altosui: Ignore built .desktop file
+ * ao-bringup: Use C version of test-flash for telegps
+ * ao-tools: Add ao-test-gps program
+ * ao-bringup: Use C version of ao-test-gps in test-telegps
+ * ao-tools/ao-test-gps: Improve output formatting
+ * ao-tools/ao-test-igniter: Remove bogus printf
+ * ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.
+ * Mark master branch as past the 1.5 point
+ * altosdroid: Update version code and name for 1.5
+ * altosdroid: Automatically sign the released version if the key is available
+ * altosui: Fix --replay to run in realtime after boost
+ * altosui: Bring up main window when doing --replay or --graph
+ * altosdroid: Update notebook to reflect current status
+ * altos: Make sure we drop the SPI mutex when aborting cc1120 recv
+ * ao-bringup: Auto-select programmer for teledongle turnon
+ * altos: Handle antenna down in ao_flight_test
+ * altosui: Check for map and stats table when changing units/fonts in graph
+ * altos: Record 32-bits for gyro calibration values
+ * altoslib: Deal with new Mega log format that has 32-bit gyro cal
+ * altosui: Update 'Imperial Units' checkbox when units change
+ * altoslib: Compute tilt angle from eeprom data
+ * altos: Fix syntax error with ao_log_mega change.
+ * altos: Copy cc1120 driver to cc1200 driver and hack a bit
+ * altos: Add prototype TeleDongle v1.9 code
+ * altoslib: synchronize access to serial debug output list
+ * altosuilib: Try to detect the architecture when loading JNI lib
+ * ao-tools/ao-send-telem: Add verbose, fake and rate options
+ * altos: Mark STM ao_spi_send as taking const pointer
+ * altos: Expose telemetry altitude macros even without GPS
+ * altos: Complete cc1200 driver
+ * altos/teledongle-v1.9: Add remaining code to complete the project
+ * altos: Sort out ao_gps_print altitude fetching
+ * altos: Increase PQT value for cc1200 improving sensitivity
+ * altos: Build TeleDongle v1.9 by default
+ * altos: Remove old AO_SEND_ALL_BARO bits
+ * altos: Perform cc1200 calibration less often. Tweak radio params
+ * altos: Fix up telemetry delay computations
+ * altos: Increase CC1200 SPI data rate to 8MHz
+ * altosui: Pop up 'Connecting' dialog during Monitor Idle
+ * altos: Rename microwater to microsplash
+ * Move teledongle 1.9 to 1.8; there's a new 1.9
+ * altos: Declare port register type only in arch header
+ * altos: Stop attempting to ramp power on CC115L
+ * altos: Use AO_SPO_SPEED_FAST for CC1200
+ * altosuilib: GPS errors are recorded in floating point, not integers
+ * altos: Use other TeleDongle LED for CRC-invalid packet reporting
+ * altos/lpc: Declare SPI send parameters as const
+ * altos/lpc: Disable JTAG when using pins for GPIO
+ * altos/teledongle-v1.9: Switch to NXP processor as on prototype boards
+ * altos: Reset interrupt flags before TX in CC1200 driver
+ * altoslib: Missing headers for mag sensor in CSV output
+ * altoslib: Make AltosState serializable
+ * altosdroid: Don't display MISSING flight number
+ * altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend
+ * altosdroid: TabMap needs to expose () constructor
+ * altoslib: add AltosPreferences state save/restore interfaces
+ * altosdroid: Save AltosState and restore at startup
+ * altosdroid: East and West were flipped in all GPS output
+ * Add AltosDroid release note for version 1.5
+ * altos/microsplash: fix .gitignore to ignore resulting binary
+ * altosui: Remove duplicate AltosUIPreferencesBackend.java
+ * altos: Allow TeleMega to be built without MPU6000
+ * altos/teledongle-v1.8: Make this the same as teledongle v1.9
+ * altos/cc1200: Wait for packet to be placed in FIFO during receive
+ * altos/cc1200: Open up preamble detect to improve sensitivity
+ * altos/cc1200: With PQT wide open, we can't use PQT_REACHED for start
+ * altoslib: Add usbtrng, usbrelay and mpusb USB ids
+ * micropeak: Support µPUSB with our own USB ids
+ * ao-bringup: Clear pending output before setting frequency.
+ * altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm
+ * altos: Adjust CC1200 RSSI reporting value
+ * altos/lpc: Switch LPC SPI driver to interrupt-driven
+ * Set version to 1.5.9.1
+ * altos: Get rid of some accidental debug code
+ * altos/lpc: Fix double-buffered USB changes
+ * altos: Add support for TeleBT v3.0
+ * altos: Initial STMF04x support
+ * altos: USBtrng v2.0 hardware bringup
+ * altos: Add self-flash support for STM32F042 processor
+ * altos: Add flash-loader to usbtrng-v2.0
+ * ao-tools: Add --wait option to ao-usbload
+ * altos/stmf0: Fix linker scripts to make ao_boot work
+ * altos/stmf0: Add faster USB path
+ * altos/stmf0: Add ADC and DMA APIs
+ * altos/usbtrng-v2.0: Add random output command
+ * altos/stm: Fix typo in stm32l.h
+ * ao-tools: Add ao-usbtrng to dump RNG data for testing
+ * altos/stmf0: Remove remaining stm32l bits from stm32f0 code
+ * altos/stmf0: Add CRC driver
+ * altos/usbtrng-v2.0: Use stmf042 hardware CRC unit
+ * altos/stmf0: Re-implement fast ADC code for stmf0
+ * Oops, forgot the TeleBT-v3.0 Makefile
+ * And, also add the TeleBT v3.0 flash loader Makefile
+ * altos/stm: Add ability to delay STDIO usage for serial ports
+ * altos/btm: Add fancier debug. Pull serial reset port low.
+ * altos: Always include a check for stdio overflow
+ * altos/telebt-v3.0: Fix stdio setup for BTM
+ * altos/telebt-v3.0: Turn red LED off after initialization
+ * altos/stmf0: Support PA11/PA12 remapping
+ * altos/usbtrng-v2.0: Select PA11/PA12 mapping config value
+ * altos/telebt-v3.0: Add monitor bits
+ * altos/telebt-v3.0: Set initial radio cal to a sensible value
+ * altos: Rename teledongle-v1.9 as teledongle-v3.0
+ * ao-bringup: Add turnon_teledonglev3
+ * Revert "altos/lpc: Fix double-buffered USB changes"
+ * Revert LPC usb performance improvements
+ * altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram
+ * altos/easymini-v1.0: Shrink stack to deal with USB changes
+ * altos/lpc: Clean up USB endpoint access functions
+ * altos/lpc: Double buffer USB data transfers
+ * Update docs for 1.6
+ * libaltos: Use more SetupDi API to get Windows 7 listing devices
+ * Add 'keithp-fat' target for uploading temporary builds to keithp's machine
+ * windows: Look for current Java version in \SOFTWARE\Wow6432Node
+ * micropeak: Fix file association registry install on Windows
+ * micropeak: Support both FTDI and Altus Metrum USB IDs
+ * micropeak: Install Windows AltusMetrum driver bits
+ * altosuilib: New teledongle and telebt devices are not pair-programmed
+ * Package TeleDongle-v3.0 firmware with TeleGPS and AltosUI apps
+ * altoslib: Store MS5607 data in AltosConfigData for use by AltosMs5607
+ * altosuilib: EEProm download from TeleGPS doesn't have states
+ * altosuilib: Don't show 'Sats in view' for TeleGPS eeprom graphing
+ * altoslib: Support TeleGPS for Monitor Idle
+ * altoslib: Use 'stateless' for Monitor Idle
+ * altoslib: Initialize GPS data to MISSING for Monitor Idle mode
+ * altos/drivers: Increase SPI speed of CC115L to 6MHz
+ * altos/lpc: Give up on interrupt-driven SPI driver
+ * altos: Separate out ao_tracker force from dbg
+ * Update version 1.6 release notes with more bug fixes
+ * altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN works
+ * altosui: Remove the dregs of AltosDroid load-old-telem code
+ * altoslib: Mark listener as 'not running' on EOF.
+ * altosuilib: Wait for product data while scanning
+ * altoslib: Drop telemetry packets processed while monitoring is disabled
+ * altosuilib: Reset telemetry state after processing it
+ * altoslib: Clear saved TelemetryReader state instead of resetting in ScanUI
+ * altosuilib: Set the icon and title of the telemetry scanning dialog
+ * doc: update 1.6 release notes with recent bug fixes
+ * altosuilib: Get the Eeprom download progress bar working again
+ * altosuilib: Don't offer to graph some GPS details that TM doesn't log
+ * Bump java library versions
+
+ [ Bdale Garbee ]
+ * updated to reflect changes from 1.5 release
+ * reflect filename changes in LLC repo
+ * store cal value correctly even when we didn't need to change it
+ * document pyro current limits in an appendix
+ * improve test procedures for TeleMega
+ * document addition of TeleDongle to the set of ARM targets to save binaries for
+ * update ChangeLog for release
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 07 Feb 2015 22:40:49 -0700
+
altos (1.5-1) unstable; urgency=medium
[ Bdale Garbee ]
* update changelog for Debian build
* capture deleted file
* more build dependencies for processing icons
+ * more build dependencies for processing icons
* update ChangeLog
+ * update changelog for Debian build
+ * another build dep
+ * use dh_installmime, which requires telling configure to stay out of the way
+ * another build dep
+ * use dh_installmime, which requires telling configure to stay out of the way
+ * update changelog for release
+ * update changelog for Debian build
+ * need multi-arch in fat build
+ * ignore cal_values file in bringup directory
+ * updated ChangeLog for release
[ Keith Packard ]
* doc: Add instructions for flash recovery technique
* altoslib/altosuilib: Add EasyMega support
* altoslib/altosuilib: clean all versions of the .jar file
* icons: Use DESTDIR when updating mime/icon caches
-
- -- Bdale Garbee <bdale@gag.com> Wed, 10 Sep 2014 00:06:56 -0600
+ * .desktop: Use %F instead of %f in .desktop files
+ * configure: Add --disable-install-shared-mime-info option
+ * altoslib: Stop re-loading previous flight when starting telemetry monitoring
+ * telegps: Was mis-configuring the 'Configure Device' dialog
+ * altos: Fix ability to disable telemetry by setting interval to 0
+ * altos: Make sure we don't beep out continuity twice in idle mode
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 13 Sep 2014 11:33:05 -0600
altos (1.4.1-1) unstable; urgency=medium