+altos (1.6-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altoslib: Stop re-loading previous flight when starting telemetry monitoring
+ * telegps: Was mis-configuring the 'Configure Device' dialog
+ * altos: Fix ability to disable telemetry by setting interval to 0
+ * altos/test: Add TMv2 test program to .gitignore
+ * altos: Add smaller altitude table file to .gitignore
+ * altos: Make sure we don't beep out continuity twice in idle mode
+ * altosui: Ignore built .desktop file
+ * ao-bringup: Use C version of test-flash for telegps
+ * ao-tools: Add ao-test-gps program
+ * ao-bringup: Use C version of ao-test-gps in test-telegps
+ * ao-tools/ao-test-gps: Improve output formatting
+ * ao-tools/ao-test-igniter: Remove bogus printf
+ * ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing.
+ * Mark master branch as past the 1.5 point
+ * altosdroid: Update version code and name for 1.5
+ * altosdroid: Automatically sign the released version if the key is available
+ * altosui: Fix --replay to run in realtime after boost
+ * altosui: Bring up main window when doing --replay or --graph
+ * altosdroid: Update notebook to reflect current status
+ * altos: Make sure we drop the SPI mutex when aborting cc1120 recv
+ * ao-bringup: Auto-select programmer for teledongle turnon
+ * altos: Handle antenna down in ao_flight_test
+ * altosui: Check for map and stats table when changing units/fonts in graph
+ * altos: Record 32-bits for gyro calibration values
+ * altoslib: Deal with new Mega log format that has 32-bit gyro cal
+ * altosui: Update 'Imperial Units' checkbox when units change
+ * altoslib: Compute tilt angle from eeprom data
+ * altos: Fix syntax error with ao_log_mega change.
+ * altos: Copy cc1120 driver to cc1200 driver and hack a bit
+ * altos: Add prototype TeleDongle v1.9 code
+ * altoslib: synchronize access to serial debug output list
+ * altosuilib: Try to detect the architecture when loading JNI lib
+ * ao-tools/ao-send-telem: Add verbose, fake and rate options
+ * altos: Mark STM ao_spi_send as taking const pointer
+ * altos: Expose telemetry altitude macros even without GPS
+ * altos: Complete cc1200 driver
+ * altos/teledongle-v1.9: Add remaining code to complete the project
+ * altos: Sort out ao_gps_print altitude fetching
+ * altos: Increase PQT value for cc1200 improving sensitivity
+ * altos: Build TeleDongle v1.9 by default
+ * altos: Remove old AO_SEND_ALL_BARO bits
+ * altos: Perform cc1200 calibration less often. Tweak radio params
+ * altos: Fix up telemetry delay computations
+ * altos: Increase CC1200 SPI data rate to 8MHz
+ * altosui: Pop up 'Connecting' dialog during Monitor Idle
+ * altos: Rename microwater to microsplash
+ * Move teledongle 1.9 to 1.8; there's a new 1.9
+ * altos: Declare port register type only in arch header
+ * altos: Stop attempting to ramp power on CC115L
+ * altos: Use AO_SPO_SPEED_FAST for CC1200
+ * altosuilib: GPS errors are recorded in floating point, not integers
+ * altos: Use other TeleDongle LED for CRC-invalid packet reporting
+ * altos/lpc: Declare SPI send parameters as const
+ * altos/lpc: Disable JTAG when using pins for GPIO
+ * altos/teledongle-v1.9: Switch to NXP processor as on prototype boards
+ * altos: Reset interrupt flags before TX in CC1200 driver
+ * altoslib: Missing headers for mag sensor in CSV output
+ * altoslib: Make AltosState serializable
+ * altosdroid: Don't display MISSING flight number
+ * altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend
+ * altosdroid: TabMap needs to expose () constructor
+ * altoslib: add AltosPreferences state save/restore interfaces
+ * altosdroid: Save AltosState and restore at startup
+ * altosdroid: East and West were flipped in all GPS output
+ * Add AltosDroid release note for version 1.5
+ * altos/microsplash: fix .gitignore to ignore resulting binary
+ * altosui: Remove duplicate AltosUIPreferencesBackend.java
+ * altos: Allow TeleMega to be built without MPU6000
+ * altos/teledongle-v1.8: Make this the same as teledongle v1.9
+ * altos/cc1200: Wait for packet to be placed in FIFO during receive
+ * altos/cc1200: Open up preamble detect to improve sensitivity
+ * altos/cc1200: With PQT wide open, we can't use PQT_REACHED for start
+ * altoslib: Add usbtrng, usbrelay and mpusb USB ids
+ * micropeak: Support µPUSB with our own USB ids
+ * ao-bringup: Clear pending output before setting frequency.
+ * altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm
+ * altos: Adjust CC1200 RSSI reporting value
+ * altos/lpc: Switch LPC SPI driver to interrupt-driven
+ * Set version to 1.5.9.1
+ * altos: Get rid of some accidental debug code
+ * altos/lpc: Fix double-buffered USB changes
+ * altos: Add support for TeleBT v3.0
+ * altos: Initial STMF04x support
+ * altos: USBtrng v2.0 hardware bringup
+ * altos: Add self-flash support for STM32F042 processor
+ * altos: Add flash-loader to usbtrng-v2.0
+ * ao-tools: Add --wait option to ao-usbload
+ * altos/stmf0: Fix linker scripts to make ao_boot work
+ * altos/stmf0: Add faster USB path
+ * altos/stmf0: Add ADC and DMA APIs
+ * altos/usbtrng-v2.0: Add random output command
+ * altos/stm: Fix typo in stm32l.h
+ * ao-tools: Add ao-usbtrng to dump RNG data for testing
+ * altos/stmf0: Remove remaining stm32l bits from stm32f0 code
+ * altos/stmf0: Add CRC driver
+ * altos/usbtrng-v2.0: Use stmf042 hardware CRC unit
+ * altos/stmf0: Re-implement fast ADC code for stmf0
+ * Oops, forgot the TeleBT-v3.0 Makefile
+ * And, also add the TeleBT v3.0 flash loader Makefile
+ * altos/stm: Add ability to delay STDIO usage for serial ports
+ * altos/btm: Add fancier debug. Pull serial reset port low.
+ * altos: Always include a check for stdio overflow
+ * altos/telebt-v3.0: Fix stdio setup for BTM
+ * altos/telebt-v3.0: Turn red LED off after initialization
+ * altos/stmf0: Support PA11/PA12 remapping
+ * altos/usbtrng-v2.0: Select PA11/PA12 mapping config value
+ * altos/telebt-v3.0: Add monitor bits
+ * altos/telebt-v3.0: Set initial radio cal to a sensible value
+ * altos: Rename teledongle-v1.9 as teledongle-v3.0
+ * ao-bringup: Add turnon_teledonglev3
+ * Revert "altos/lpc: Fix double-buffered USB changes"
+ * Revert LPC usb performance improvements
+ * altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram
+ * altos/easymini-v1.0: Shrink stack to deal with USB changes
+ * altos/lpc: Clean up USB endpoint access functions
+ * altos/lpc: Double buffer USB data transfers
+ * Update docs for 1.6
+ * libaltos: Use more SetupDi API to get Windows 7 listing devices
+ * Add 'keithp-fat' target for uploading temporary builds to keithp's machine
+ * windows: Look for current Java version in \SOFTWARE\Wow6432Node
+ * micropeak: Fix file association registry install on Windows
+ * micropeak: Support both FTDI and Altus Metrum USB IDs
+ * micropeak: Install Windows AltusMetrum driver bits
+ * altosuilib: New teledongle and telebt devices are not pair-programmed
+ * Package TeleDongle-v3.0 firmware with TeleGPS and AltosUI apps
+ * altoslib: Store MS5607 data in AltosConfigData for use by AltosMs5607
+ * altosuilib: EEProm download from TeleGPS doesn't have states
+ * altosuilib: Don't show 'Sats in view' for TeleGPS eeprom graphing
+ * altoslib: Support TeleGPS for Monitor Idle
+ * altoslib: Use 'stateless' for Monitor Idle
+ * altoslib: Initialize GPS data to MISSING for Monitor Idle mode
+ * altos/drivers: Increase SPI speed of CC115L to 6MHz
+ * altos/lpc: Give up on interrupt-driven SPI driver
+ * altos: Separate out ao_tracker force from dbg
+ * Update version 1.6 release notes with more bug fixes
+ * altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN works
+ * altosui: Remove the dregs of AltosDroid load-old-telem code
+ * altoslib: Mark listener as 'not running' on EOF.
+ * altosuilib: Wait for product data while scanning
+ * altoslib: Drop telemetry packets processed while monitoring is disabled
+ * altosuilib: Reset telemetry state after processing it
+ * altoslib: Clear saved TelemetryReader state instead of resetting in ScanUI
+ * altosuilib: Set the icon and title of the telemetry scanning dialog
+ * doc: update 1.6 release notes with recent bug fixes
+ * altosuilib: Get the Eeprom download progress bar working again
+ * altosuilib: Don't offer to graph some GPS details that TM doesn't log
+ * Bump java library versions
+
+ [ Bdale Garbee ]
+ * updated to reflect changes from 1.5 release
+ * reflect filename changes in LLC repo
+ * store cal value correctly even when we didn't need to change it
+ * document pyro current limits in an appendix
+ * improve test procedures for TeleMega
+ * document addition of TeleDongle to the set of ARM targets to save binaries for
+ * update ChangeLog for release
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 07 Feb 2015 22:40:49 -0700
+
altos (1.5-1) unstable; urgency=medium
[ Bdale Garbee ]
* update changelog for Debian build
* capture deleted file
* more build dependencies for processing icons
+ * more build dependencies for processing icons
* update ChangeLog
+ * update changelog for Debian build
+ * another build dep
+ * use dh_installmime, which requires telling configure to stay out of the way
+ * another build dep
+ * use dh_installmime, which requires telling configure to stay out of the way
+ * update changelog for release
+ * update changelog for Debian build
+ * need multi-arch in fat build
+ * ignore cal_values file in bringup directory
+ * updated ChangeLog for release
[ Keith Packard ]
* doc: Add instructions for flash recovery technique
* altoslib/altosuilib: Add EasyMega support
* altoslib/altosuilib: clean all versions of the .jar file
* icons: Use DESTDIR when updating mime/icon caches
-
- -- Bdale Garbee <bdale@gag.com> Wed, 10 Sep 2014 00:06:56 -0600
+ * .desktop: Use %F instead of %f in .desktop files
+ * configure: Add --disable-install-shared-mime-info option
+ * altoslib: Stop re-loading previous flight when starting telemetry monitoring
+ * telegps: Was mis-configuring the 'Configure Device' dialog
+ * altos: Fix ability to disable telemetry by setting interval to 0
+ * altos: Make sure we don't beep out continuity twice in idle mode
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 13 Sep 2014 11:33:05 -0600
altos (1.4.1-1) unstable; urgency=medium