ao-load \- flash a program to a AltOS device
.SH SYNOPSIS
.B "ao-load"
-[\-tty \fItty-device\fP]
+[\-T \fItty-device\fP]
+[\--tty \fItty-device\fP]
+[\-D \fIaltos-device\fP]
+[\--device \fIaltos-device\fP]
+[\--cal \fIradio-calibration\fP]
\fIfile.ihx\fP
\fIdevice serial number\fP
.SH DESCRIPTION
.I ao-load
loads the specified .ihx file into the target device flash memory,
customizing the AltOS image with the specified serial number.
+.SH OPTIONS
+.TP
+\-T tty-device | --tty tty-device
+This selects which tty device the debugger uses to communicate with
+the target device. The special name 'BITBANG' directs ao-dbg to use
+the cp2103 connection, otherwise this should be a usb serial port
+connected to a suitable cc1111 debug node.
+.TP
+\-D AltOS-device | --device AltOS-device
+Search for a connected device. This requires an argument of one of the
+following forms:
+.IP
+TeleMetrum:2
+.br
+TeleMetrum
+.br
+2
+.IP
+Leaving out the product name will cause the tool to select a suitable
+product, leaving out the serial number will cause the tool to match
+one of the available devices.
+.TP
+\-c radio-calibration | --cal radio-calibration
+This programs the radio calibration value into the image for hardware
+which doesn't have any eeprom storage for this value. The value here
+can be computed given the current radio calibration value, the
+measured frequency and the desired frequency:
+.IP
+ cal' = cal * (desired/measured)
+.IP
+The default calibration value is 1186611.
.SH USAGE
.I ao-load
reads the specified .ihx file into memory, locates the matching .map