#!/bin/sh
-if [ -x ../ao-tools/ao-load/ao-load ]; then
- AOLOAD=../ao-tools/ao-load/ao-load
-elif [ -x /usr/bin/ao-load ]; then
- AOLOAD=/usr/bin/ao-load
+if [ -x /usr/bin/dfu-util ]; then
+ DFU_UTIL=/usr/bin/dfu-util
else
- echo "Can't find ao-load! Aborting."
- exit 1
+ echo "Can't find dfu-util! Aborting."
+ exit 1
fi
-if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
- RAWLOAD=../ao-tools/ao-rawload/ao-rawload
-elif [ -x /usr/bin/ao-rawload ]; then
- RAWLOAD=/usr/bin/ao-rawload
+if which ao-usbload > /dev/null; then
+ USBLOAD=`which ao-usbload`
else
- echo "Can't find ao-rawload! Aborting."
+ echo "Can't find ao-usbload! Aborting."
exit 1
fi
-echo "TeleMini v0.1 Turn-On and Calibration Program"
-echo "Copyright 2010 by Bdale Garbee. Released under GPL v2"
+VERSION=3.0
+PRODUCT=TeleMini
+
+echo "$PRODUCT v$VERSION Turn-On and Calibration Program"
+echo "Copyright 2017 by Keith Packard. Released under GPL v2 or later"
echo
echo "Expectations:"
-echo "\tTeleMini v0.1 powered from USB"
-echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header"
-echo "\t\twith coax from SMA to frequency counter"
+echo "\t$PRODUCT v$VERSION powered from USB"
echo
-echo -n "TeleMini serial number: "
-read SERIAL
+echo -n "$PRODUCT-$VERSION serial number: "
+
+case $# in
+ 1)
+ SERIAL="$1"
+ echo "$PRODUCT-$VERSION serial number: $SERIAL"
+ ;;
+ 0)
+ echo -n "$PRODUCT-$VERSION serial number: "
+ read SERIAL
+ ;;
+ *)
+ echo "Usage: $0 <serial-number>" 1>&2
+ exit 1;
+ ;;
+esac
+
+FLASH_FILE=~/altusmetrumllc/Binaries/loaders/telemini-v$VERSION-altos-flash-*.bin
+ALTOS_FILE=~/altusmetrumllc/Binaries/telemini-v$VERSION-*.elf
+#FLASH_FILE=../src/telemini-v3.0/flash-loader/telemini-v$VERSION-altos-flash-*.bin
+#ALTOS_FILE=../src/telemini-v3.0/telemini-v$VERSION-*.elf
+
+$DFU_UTIL -a 0 -s 0x08000000:leave -D $FLASH_FILE || exit 1
-echo $RAWLOAD
+sleep 2
+
+$USBLOAD --serial=$SERIAL $ALTOS_FILE || exit 1
+
+sleep 3
+
+dev=`ao-list | awk '/'"$PRODUCT"'-v'"$VERSION"'/ { print $3; exit(0); }'`
+
+case "$dev" in
+/dev/tty*)
+ echo "$PRODUCT found on $dev"
+ ;;
+*)
+ echo 'No '"$PRODUCT"'-v'"$VERSION"' found'
+ exit 1
+ ;;
+esac
-$RAWLOAD -D 100 -r ao_led_blink.ihx
-echo "LEDs should be blinking"
-sleep 5
+echo 'E 0' > $dev
-$RAWLOAD -D 100 -r ao_radio_xmit.ihx
-echo -n "Generating RF carrier. Please enter measured frequency: "
-read FREQ
+SERIAL=$SERIAL ./cal-freq $dev
-CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+echo 'E 1' > $dev
-echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/stable/telemini-v0.1*.ihx $SERIAL
+./test-telemini
-echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
-echo "Unplug and replug USB, cu to the board, confirm freq and record power"
+exit $?