updated EasyTimer status

[web/altusmetrum] / TeleShield / index.mdwn

diff --git a/TeleShield/index.mdwn b/TeleShield/index.mdwn
index 6151df00be79f67bec0b2c4c6f962aa2bf6697ad..2fc3c782bd6be841ed11728cfea4f1c6c8b18415 100644 (file)
--- a/TeleShield/index.mdwn
+++ b/TeleShield/index.mdwn
@@ -1,3 +1,4 @@
+[[!meta title="TeleShield"]]
 # TeleShield
 
 This is an RF interface board for use with [Arduino](http://arduino.cc)
@@ -24,6 +25,7 @@ visit the [AltOS](../AltOS) page on this site.
   or as a USB peripheral
 * 70cm ham-band transceiver compatible with [Altus Metrum](../) products,
   programmed for 38k4 GFSK data rate with forward error correction
+* Bluetooth
 * micro USB interface
 * 4 pin Tyco MicroMaTch connector for debug and flash programming
 * 8 pin Tyco MicroMaTch connector supports serial or SPI interface
@@ -41,7 +43,7 @@ visit the [AltOS](../AltOS) page on this site.
        * 2 channels of serial I/O
        * digital I/O
        * interfaced to Arduino via async serial plus two handshake pins
-* Raycom Bluetooth module interfaced to the CC1111 via async serial
+* Rayson BTM-182 (Bluetooth SPP module) using async to CC1111
 * micro SD card socket interfaced to the Arduino via SPI
 * 150mA 3.3V LDO regulator
        * can take input from either USB or the unregulated Arduino input
@@ -69,5 +71,10 @@ The hardware design current gEDA files are available from
 
 ## Future Plans ##
 
-Prototype v0.1 boards will hopefully be working in time to show at the 
-Arduino mini-conference at LCA 2012 in mid-January.
+The prototype v0.1 boards work fine.  Feedback from showing them at the
+Arduino mini-conference at LCA 2012 resulted in elimination of the Bluetooth
+interface.  Updated boards have not been built yet, but 
+[schematic and artwork files](v0.2/) are available for review and comment.
+
+No significant interest in this design ever materialized, so we have no plans
+to make any more at this time.