+[[!meta title TeleShield]]
# TeleShield
This is an RF interface board for use with [Arduino](http://arduino.cc)
or as a USB peripheral
* 70cm ham-band transceiver compatible with [Altus Metrum](../) products,
programmed for 38k4 GFSK data rate with forward error correction
+* Bluetooth
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
* 2 channels of serial I/O
* digital I/O
* interfaced to Arduino via async serial plus two handshake pins
-* Raycom Bluetooth module interfaced to the CC1111 via async serial
+* Rayson BTM-182 (Bluetooth SPP module) using async to CC1111
* micro SD card socket interfaced to the Arduino via SPI
* 150mA 3.3V LDO regulator
* can take input from either USB or the unregulated Arduino input
## Future Plans ##
-Prototype v0.1 boards will hopefully be working in time to show at the
-Arduino mini-conference at LCA 2012 in mid-January.
+The prototype v0.1 boards work fine. Feedback from showing them at the
+Arduino mini-conference at LCA 2012 resulted in elimination of the Bluetooth
+interface. Updated boards have not been built yet, but
+[schematic and artwork files](v0.2/) are available for review and comment.
+
+If there is sufficient interest, we will produce some. Exactly if or
+when that will happen and what they might cost are not known yet.