Update TeleMini docs to include v3.0 boards

[web/altusmetrum] / TeleMini / v1.0 / index.mdwn

diff --git a/TeleMini/v1.0/index.mdwn b/TeleMini/v1.0/index.mdwn
new file mode 100644 (file)
index 0000000..80f5509
--- /dev/null
+++ b/TeleMini/v1.0/index.mdwn
@@ -0,0 +1,55 @@
+## Version 1.0 ##
+
+This is the original TeleMini using the CC1111 SoC and MP3H6115A
+analog barometric sensor.
+
+<a href="telemini_top.jpg"> <img src="telemini_top_thumb.jpg"></a>
+<a href="telemini_bottom.jpg"> <img src="telemini_bottom_thumb.jpg"></a>
+
+## Features ##
+
+### User View ###
+
+* Recording altimeter for model rocketry
+* Supports dual deployment (can fire 2 ejection charges)
+* 70cm ham-band transceiver for telemetry downlink
+* Barometric pressure sensor good to 45k feet MSL
+* Designed to use a single LiPo rechargeable battery
+* 4kB storage
+* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
+
+### Developer View ###
+
+* Hardware Features
+       * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
+               * Sub-1Ghz transceiver
+               * 8051 MCU
+               * 32k Flash
+               * 4k RAM
+               * USB 2.0
+               * 6 12-bit analog inputs (11 bits with single-ended sensors)
+               * 2 channels of serial I/O
+               * digital I/O
+       * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor
+* Software Features
+       * Written mostly in C with some 8051 assembler
+       * Runs from on-chip flash, uses on-chip RAM, stores flight data to
+               upper blocks of on-chip flash
+* Tools Used
+       * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
+       * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
+* Licenses
+       * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
+       * The software is licensed [GPL version 2 or later](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
+
+## Artifacts ##
+
+There is a single manual for TeleMini and all other Altus Metrum products,
+which is available in [html](../AltOS/doc/altusmetrum.html) and 
+[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemini-v1-outline.pdf) format.
+
+The hardware design files can be found on [git.gag.com](http://git.gag.com) 
+in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).