remove dangling comma

[web/altusmetrum] / TeleMini / index.mdwn

diff --git a/TeleMini/index.mdwn b/TeleMini/index.mdwn
index 8fa6ff39a79f95808aa73ab4624f125a22e7b351..49db4449d31737ad3e4c48925341a5b395f8d5b0 100644 (file)
--- a/TeleMini/index.mdwn
+++ b/TeleMini/index.mdwn
@@ -1,3 +1,4 @@
+[[!meta title="TeleMini"]]
 # TeleMini
 
 This is a very small, baro-only recording dual-deploy altimeter for 
@@ -36,7 +37,10 @@ Here's two photos of v3.0, top and bottom:
                * 6k RAM
                * USB 2.0
                * digital I/O
+       * [TI CC1200](http://www.ti.com/product/cc1200) High Performance RF Transceiver for Narrowband Systems 
+       
        * [Measurement Specialties MS5607](http://www.te.com/usa-en/product-CAT-BLPS0035.html) pressure sensor
+       * [Macronix MX25L4006E](http://www.macronix.com/Lists/Datasheet/Attachments/5087/MX25L4006E,%203V,%204Mb,%20v1.6.pdf) 512kB serial flash memory
 * Software Features
        * Written mostly in C with some ARM assembler
 * Tools Used
@@ -59,8 +63,15 @@ which is available in [html](../AltOS/doc/altusmetrum.html) and
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
 An outline of the board with drill hole locations is available in
-[pdf](../Documents/telemini-v3-outline.pdf) format.
+[pdf](../AltOS/doc/telemini-v3-outline.pdf) format.
 
 The hardware design files can be found on [git.gag.com](http://git.gag.com) 
 in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).  
 
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of the files for Production PCB version 3.0 in more easily readable form.  
+
+* [schematic](v3.0/telemini-sch.pdf)
+* [pcb artwork](v3.0/telemini-pcb.pdf)
+* [bill of materials](v3.0/partslist.csv)
+