-# TeleMini
+# TeleMini #
-This is a very small, baro-only recording dual-deploy altimeter for
-model rocketry with integrated telemetry link.
+There are two versions of TeleMini:
-Production units are available from the
-[Garbee and Garbee](http://auric.gag.com) web
-store. TeleMini starter kits are also available from
-[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp).
-
-For the latest TeleMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.
-
-These are photos of our current production version:
-
-<a href="v1.0/telemini_top.jpg"> <img src="v1.0/telemini_top_thumb.jpg"></a>
-<a href="v1.0/telemini_bottom.jpg"> <img src="v1.0/telemini_bottom_thumb.jpg"></a>
-
-## Features ##
-
-### User View ###
-
-* Recording altimeter for model rocketry
-* Supports dual deployment (can fire 2 ejection charges)
-* 70cm ham-band transceiver for telemetry downlink
-* Barometric pressure sensor good to 45k feet MSL
-* Designed to use a single LiPo rechargeable battery
-* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
-
-### Developer View ###
-
-* Hardware Features
- * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
- * Sub-1Ghz transceiver
- * 8051 MCU
- * 32k Flash
- * 4k RAM
- * USB 2.0
- * 6 12-bit analog inputs (11 bits with single-ended sensors)
- * 2 channels of serial I/O
- * digital I/O
- * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor
-* Software Features
- * Written mostly in C with some 8051 assembler
- * Runs from on-chip flash, uses on-chip RAM, stores flight data to
- upper blocks of on-chip flash
-* Tools Used
- * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
- * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
-* Licenses
- * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
- * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
-
-## Artifacts ##
-
-There is a single manual for TeleMini and all other Altus Metrum products,
-which is available in [html](../AltOS/doc/altusmetrum.html) and
-[pdf](../AltOS/doc/altusmetrum.pdf) formats.
-
-The hardware design files can be found on [git.gag.com](http://git.gag.com)
-in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).
-
-For those who don't have ready access to the gEDA suite, here are pdf snapshots
-of the files for Production PCB version 1.0 in more easily readable form.
-
-* [schematic](v1.0/telemini.pdf)
-* [pcb artwork](v1.0/telemini.pcb.pdf)
-* [bill of materials](v1.0/partslist.csv)
+ * [Version 1.0](v1.0) — the original TeleMini, 0.5 x 1.5 inches
+ * [Version 1.2](v1.2) — the new TeleMini, 0.8 x 1.5 inches
projects / web / altusmetrum / blobdiff