## Artifacts ##
The hardware design current gEDA files are available from
-[git.gag.com](http://git.gag.com). The 'fab' tag on the master branch reflects
+[git.gag.com](http://git.gag.com) in the project
+[hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary). The 'fab'
+tag on the master branch reflects
the artwork as sent out for PCB fab. The 'loaded' tag on the master branch
indicates the parts Bdale loads for a functional board, but the schematic
does not reflect the cuts and jumps or added resistors. The 'nextcut' branch
schematic used to generate the BOM for partially loading boards to use in
the matching [TeleTerra](../TeleTerra) ground station design.
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of files in more easily readable form. The schematic and BOM are from the
+'nextcut' branch as of 20 April 2009, the artwork is of the v0.1 boards:
+
+* [schematic](telemetrum.pdf)
+* [pcb artwork](telemetrum.pcb.pdf)
+* [bill of materials](telemetrum.bom)
+
+
Keith has working firmware that has now been flown once and successfully
-collected flight data to apogee. We'll publish a link to the git
-repository here soon!
+collected flight data to apogee. The source is also available from
+[git.gag.com](http://git.gag.com) in the project
+[fw/altos](http://git.gag.com/?p=fw/altos;a=summary). Note that actually
+building these sources requires a modifified version of sdcc and a set of
+helper utilities that we're not publishing since we hope to have the important
+bits accepted upstream shortly. Watch this space for more details soon.