This is a recording dual-deploy altimeter for high power model rocketry
with integrated telemetry link.
+<a href="v0.2 SMT side"> <img src="v0.2/cimg5164-cropped.jpg"></a>
+<a href="v0.2 connector side"> <img src="v0.2/cimg5171-cropped.jpg"></a>
<a href="loadedpair.jpg"> <img src="loadedpair-thumb.jpg"></a>
<a href="rawfront.jpg"> <img src="rawfront-thumb.jpg"></a>
<a href="rawback.jpg"> <img src="rawback-thumb.jpg"></a>
using a different part in the same TI series, that integrated a transceiver
and CPU on the same chip.
It didn't take us long to realize that with such a part we could combine and
-simplify things by building a new altimeter with integrated RF link!
+simplify things by building a new altimeter with integrated RF link! And
+after gaining some experience in 2009 with a first version, we realized we
+always want GPS on board, which lead to our current second generation boards.
## Features ##
* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
* The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
-[## Production History ##](production)
+## [Production History](production) ##
-[## Flight Logs ##](flightlogs)
+## [Flight Logs](flightlogs) ##
## Problems ##
## Artifacts ##
The hardware design current gEDA files are available from
-[git.gag.com](http://git.gag.com). The 'fab' tag on the master branch reflects
-the artwork as sent out for PCB fab. The 'loaded' tag on the master branch
-indicates the parts Bdale loads for a functional board, but the schematic
-does not reflect the cuts and jumps or added resistors. The 'nextcut' branch
-is work towards our next PCB revision. The 'ground' branch has a cut-down
-schematic used to generate the BOM for partially loading boards to use in
-the matching TeleTerra ground station design.
-
-Keith has working data collection firmware, however the firmware is under a
-massive, rapid rewrite to eliminate FreeRTOS which is much more generalized
-and capable than we need... and consuming more system resources than we
-can tolerate. As soon as we're over this transition, the sourcecode to the
-firmware and related tools will also be made available.
-
-As of 11 April 2009, the first two boards are fully checked out, we have some
-initial firmware capable of data logging ready, and as soon as we get a good
-day to fly we hope to log our first flight data!
+[git.gag.com](http://git.gag.com) in the project
+[hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary).
+
+Work on the next version proceeds on the master branch, with occasional
+temporary branches created when Bdale is making some major / speculative
+change. The 'v0.2' and 'v0.1' branches document what we're actually flying
+right now on the two respective PCB revisions. The 'ground' branch has a
+cut-down schematic used to generate the BOM for partially loading v0.1 boards
+to used on the ground. We call the on-the-ground version 'TeleDongle'.
+
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of files in more easily readable form.
+
+* These are from the v0.2 branch:
+ * [schematic](v0.2/telemetrum.pdf)
+ * [pcb artwork](v0.2/telemetrum.pcb.pdf)
+ * [bill of materials](v0.2/partslist.csv)
+* These are as of the working-v0.1 tag:
+ * [schematic](v0.1/telemetrum.pdf)
+ * [pcb artwork](v0.1/telemetrum.pcb.pdf)
+ * [bill of materials](v0.1/telemetrum.bom)
+
+We have firmware that works well enough that we now routinely allow TeleMetrum
+to control flights by firing ejection charges. We've flown v0.1 boards in
+rockets exceeding 50g acceleration, above Mach 1, and to altitudes greater
+than 12k feet AGL with great results. Keith wrote a ground station program
+called
+ao-view that logs telemetry to disk, displays current and max
+values for key parameters during flight, and even includes voice synthesis
+during the flight so that our eyes can stay on the rockets! We have post
+flight analysis software that makes it easy to extract data from the board,
+analyze it, and even generate KML files for viewing flights in GoogleEarth!
+More details on the software, including full source code and pre-built packages
+can be found on the [AltOS](../AltOS) page on this site.
+
+## Future Plans ##
+
+Work is underway on a second revision of TeleMetrum with the following changes:
+
+* stretch board length by 0.25 inches
+* adjust USB connector position to be flush with edge of board
+* eliminate temperature sensor, since baro sensor is already compensated and there's a sensor on the cc1111
+* eliminate serial port connector
+* integrate SkyTraq Venus GPS receiver and patch antenna on-board
+* change debug connector to 4 pin Tyco MicroMaTch
+* add 8 pin Tyco MicroMaTch connector for companion board interface
+* use v_lipo as pyro power, eliminating the huge 1000uF capacitor and instead
+ adding ballast capacitance on the 3.3V rail to prevent brownouts
+* move all connectors, beeper, and GPS patch antenna to the "other side" of the board from the surface mount parts
+* add a rectangle of silk screen material for improved serial number labeling
+
+As of early December 2009, the layout work for v0.2 is done and we're busy
+verifying it and deciding exactly how we're going to build them. We hope to
+have first prototypes to test in time to show the new version at LCA in late
+January 2010. If it works out as well as we hope, v0.2 may be made available
+in assembled and tested form to others in the rocketry hobby who have
+expressed interest sometime in 2010.