Add outline pdfs for everyone

[web/altusmetrum] / TeleMega / index.mdwn

diff --git a/TeleMega/index.mdwn b/TeleMega/index.mdwn
index f32780bb10cb16a76c08c3952370fadc4bf8c857..3894ac0393a0ac6e5dc4a2a313f7821f422a50c4 100644 (file)
--- a/TeleMega/index.mdwn
+++ b/TeleMega/index.mdwn
@@ -8,7 +8,8 @@ can be based on time and various flight events and status, including angle
 from vertical.
 
 For the latest TeleMega firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.
+visit the [AltOS](../AltOS) page on this site.  TeleMega requires AltOS
+version 1.3 or later.
 
 These are photos of the current production version 1.0:
 
@@ -27,7 +28,7 @@ These are photos of the current production version 1.0:
 * 70cm ham-band transceiver for telemetry downlink
 * Barometric pressure sensor good to 100k feet MSL
 * 1-axis 105-g accelerometer for motor characterization
-* 3-axis 18-g accelerometer for gyro calibration
+* 3-axis 16-g accelerometer for gyro calibration
 * 3-axis 2000 deg/sec gyros
 * 3-axis magnetic sensor
 * On-board, integrated GPS receiver
@@ -76,6 +77,9 @@ There is a single manual for TeleMega and most other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemega-outline.pdf] format.
+
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/telemega](http://git.gag.com/?p=hw/telemega;a=summary).