Add outline pdfs for everyone

[web/altusmetrum] / TeleMega / index.mdwn

diff --git a/TeleMega/index.mdwn b/TeleMega/index.mdwn
index 0638355d6c9bba7fee5748ced3208c06c3d305c8..3894ac0393a0ac6e5dc4a2a313f7821f422a50c4 100644 (file)
--- a/TeleMega/index.mdwn
+++ b/TeleMega/index.mdwn
@@ -8,12 +8,13 @@ can be based on time and various flight events and status, including angle
 from vertical.
 
 For the latest TeleMega firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.
+visit the [AltOS](../AltOS) page on this site.  TeleMega requires AltOS
+version 1.3 or later.
 
-These are photos of the first v0.1 prototype:
+These are photos of the current production version 1.0:
 
-<a href="v0.1/megametrum-v0.1-top.jpg"> <img src="v0.1/megametrum-v0.1-top-thumb.jpg"></a>
-<a href="v0.1/megametrum-v0.1-bottom.jpg"> <img src="v0.1/megametrum-v0.1-bottom-thumb.jpg"></a>
+<a href="v1.0/telemega-v1.0-top.jpg"> <img src="v1.0/telemega-v1.0-top-thumb.jpg"></a>
+<a href="v1.0/telemega-v1.0-bottom.jpg"> <img src="v1.0/telemega-v1.0-bottom-thumb.jpg"></a>
 
 ## Features ##
 
@@ -27,7 +28,7 @@ These are photos of the first v0.1 prototype:
 * 70cm ham-band transceiver for telemetry downlink
 * Barometric pressure sensor good to 100k feet MSL
 * 1-axis 105-g accelerometer for motor characterization
-* 3-axis 18-g accelerometer for gyro calibration
+* 3-axis 16-g accelerometer for gyro calibration
 * 3-axis 2000 deg/sec gyros
 * 3-axis magnetic sensor
 * On-board, integrated GPS receiver
@@ -76,24 +77,20 @@ There is a single manual for TeleMega and most other Altus Metrum products,
 which is available in [html](../AltOS/doc/altusmetrum.html) and 
 [pdf](../AltOS/doc/altusmetrum.pdf) formats.
 
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemega-outline.pdf] format.
+
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/telemega](http://git.gag.com/?p=hw/telemega;a=summary).  
 
-## Future Plans ##
-
-TeleMega v0.1 prototypes worked and were flown on a number of test 
-flights.  This version was shown publicly at NARCON 2013.
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of the files for Production PCB version 1.0 in more easily readable form:
 
-Several changes to the hardware to improve performance and reliability 
-resulted in a v0.2 prototype version, however feedback from conversations at
-NARCON caused us to sort of "skip" doing much with this version.
+* [schematic](v1.0/telemega-sch.pdf)
+* [pcb artwork](v1.0/telemega-pcb.pdf)
+* [bill of materials](v1.0/partslist.csv)
 
-Version 0.3 prototypes were built and working, with an improved pyro control 
-circuit and u-blox 6-series GPS receiver.  The first test flight of v0.3 was 
-on 19 May 2013, and the results looked great!  Unfortunately, all prototypes
-were then lost in the fire that destroyed Bdale's house.
+## Future Plans ##
 
-Version 0.4 prototypes are built and work great, using the brand-new u-blox
-MAX-7Q GPS receiver.  Flight testing is underway, and we hope to introduce
-TeleMega as a product by the end of October 2013.
+Version 1.0 is now available for purchase.