# TeleLaunch — Multi-channel Wireless Launch Controller System #
-TeleLaunch is secure radio-controlled rocket launch system capable of
+TeleLaunch is a secure radio-controlled rocket launch system capable of
operating up to 792 pads from a single controler. A typical TeleLaunch
-system consists of one LCO unit and one or more pyro units.
+system consists of one TeleLCO unit and one or more TeleFire units.
TeleLaunch uses a two-way digital radio communications system for
positive indication of all operations. The communications link is
## Launch Control Products ##
-All launch control units in the TeleLaunch system are designed to use
+All TeleLCO devices in the TeleLaunch system are designed to use
a lithium polymer battery that can be recharged over USB. They support
distinct arm and fire switches, continuous indication of igniter
continuity, and have super-bright LED indicators for remote arming,
### TeleLCO ###
-<a href="telelco-v2.0/telelco-v2.0-open.jpg"> <img src="telelco-v2.0/telelco-v2.0-open_small.jpg"></a>
+<a href="telelco-v2.0/lco-open.jpg"> <img src="telelco-v2.0/lco-open-small.jpg"></a>
-TeleLCO controls up to 100 TeleFire banks, comes packaged in a rugged
+TeleLCO controls up to 99 TeleFire banks, comes packaged in a rugged
case, and is typically placed on a table for use by the designated LCO.
* Large 1.36 inch LCD display for selected bank and pad
[git.gag.com](http://git.gag.com) in the project
[hw/telelco](http://git.gag.com/?p=hw/telelco;a=summary).
-### TeleLCOTwo ###
+For those who don't have ready access to the Lepton-EDA and pcb-rnd tool suites,
+here are pdf snapshots of the files for PCB version 2.0 in more easily
+readable form:
-<img src="protos/telelcotwo.jpg">
+* [schematic](telelco-v2.0/telelco-sch.pdf)
+* [pcb artwork](telelco-v2.0/telelco-pcb.pdf)
-A small LCO unit capable of handling up to two pyro channels. TeleLCOTwo
-is ideal for individuals, or clubs that have an existing launch control
-system but want to use TeleLaunch for an "away" launch cell.
+## TeleFire Boxes ##
-TeleLCOTwo is configured in advance by USB to know which two pyro channels
-it should interact with, and then a simple rocker switch selects between
-the two during use.
-
-TeleLCOTwo comes packaged in a weather-sealed polycarbonate box with
-switches on one face, and BNC antenna connector and USB connectors
-through the box walls. It can be placed on a table, but is typically
-hand-held during operation.
-
-The TeleLCOTwo hardware design is available from
-[git.gag.com](http://git.gag.com) in the project
-[hw/telelcotwo](http://git.gag.com/?p=hw/telelcotwo;a=summary).
-
-## Pyro Boards ##
-
-Each pyro board in the TeleLaunch system uses FET technology for lowest
+Each TeleFire box in the TeleLaunch system uses FET technology for lowest
possible resistance paths, allowing maximum current to be reliably
delivered from the power source to the igniter leads. TeleFire boards can
-be powered by any 10-15V supply. This would typically be a 12V lead acid
-battery, but 3-cell lithium polymer packs used in RC aircraft are also
-suitable.
+be powered by any 10-15V supply, typically a 12V sealed lead acid
+battery.
Each board features:
* Super-bright LEDs for continuity, arming and RF quality indicators.
- * Strobe and Siren. TeleFireFour has two 12V medium current (5A) outputs
- to drive a siren and strobe light when the launch system is armed
+ * Strobe and Siren. TeleFire boards have has two 12V medium current (5A)
+ outputs to drive a siren and strobe light when the launch system is armed
and ready to fire.
* Local arming switch. When in the safe position, power is completely
of the LCO accidentally engaging firing circuits during rocket
preparations at the pad.
- * Each board is designed to fit in a standard Hammond weather-sealed
- polycarbonate enclosure with weather-sealed rocker switches for
- power and arming plus cable glands for DC input cable and igniter
- output cables. Alternatively, boards can be configured to mount
- in the user's choice of enclosure, such as a metal ammo box or
- larger NEMA enclosure with space for the user's choice of
- external connectors.
-
-### TeleFireTwo ###
-
-<img src="protos/telefireone.jpg">
-
-TeleFireTwo is a pyro board supporting two igniter circuits. This
-makes TeleFireTwo ideal for individuals, launch trailers, or for "away
-cells" at larger club launches.
-
-All high-current connections are made on the board using standard
-1/4-inch spade lugs, with screw terminals for the siren and strobe. This
-allows for easy packaging and quick board swaps.
-
-The photo above is of an early single-channel prototype, the design has
-changed significantly since then and we'll take new photos someday. The two
-switches are for power on/off and safe/arm. The two cables are for DC power
-in and igniter leads out.
-
-The TeleFireOne hardware design is available from
-[git.gag.com](http://git.gag.com) in the project
-[hw/telefiretwo](http://git.gag.com/?p=hw/telefiretwo;a=summary).
-
### TeleFireEight ###
-<a href="telefireeight-v2/tf8-packaged.jpg"> <img src="telefireeight-v2/tf8-packaged_small.jpg"></a>
+<a href="telefireeight-v2/tf8-overview.png"> <img src="telefireeight-v2/tf8-overview-small.png"></a>
TeleFireEight has eight igniter circuits, making it ideal for use at
club launches. Larger clubs or launch site setups can use multiple
[git.gag.com](http://git.gag.com) in the project
[hw/telefireeight](http://git.gag.com/?p=hw/telefireeight;a=summary).
+For those who don't have ready access to the Lepton-EDA and pcb-rnd tool suites,
+here are pdf snapshots of the files for PCB version 2 in more easily
+readable form:
+
+* [schematic](telefireeight-v2/telefireeight-sch.pdf)
+* [pcb artwork](telefireeight-v2/telefireeight-pcb.pdf)
+
## Documentation ##
There's a cheat-sheat inside the lid of TeleLCO that has proven to be
## Availability ##
TeleLCO and TeleFireEight are now in production, and available for purchase
-directly through the [Garbee and Garbee](https://shop.gag.com) online store.
-
-Prototypes of the other products in this family have been built, deployed,
-and used successfully. Updates to the designs are underway and we hope to
-have additional products available in 2019.
+directly through the [Garbee and Garbee](https://shop.gag.com/telelaunch.html)
+online store.
## Licenses ##
TeleLaunch software is licensed
[GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
+## [Future Products](futures.html)
+
projects / web / altusmetrum / blobdiff