Merge branch 'master' of ssh://git.gag.com/scm/git/web/altusmetrum

[web/altusmetrum] / TeleDongle / index.mdwn

diff --git a/TeleDongle/index.mdwn b/TeleDongle/index.mdwn
index cf6b61d4eccf2efff9e31bec2138013b98adc74e..cf182f92a4f0dd3c4a747be2da162c5ee45c9d2b 100644 (file)
--- a/TeleDongle/index.mdwn
+++ b/TeleDongle/index.mdwn
@@ -7,11 +7,19 @@ and SPI are also available as alternatives.  The RF filter components are
 by default set for use in the vicinity of 435 Mhz, but can be altered to
 support other frequency ranges.
 
+Production units are not currently available, but we hope to make more soon.
+
+For the latest TeleDongle firmware and related software, please
+visit the [AltOS](../AltOS) page on this site.
+
+<img src="v0.2/cimg5556-small.jpg">
+
 ## Features ##
 
 ### User View ###
 
 * 70cm ham-band transceiver for interaction with [TeleMetrum](../TeleMetrum/)
+* programmed for 38k4 GFSK data rate with forward error correction
 * USB interface for power, configuration, and data interface
 * 4 pin Tyco MicroMaTch connector for debug and flash programming
 * 8 pin Tyco MicroMaTch connector supports serial or SPI interface
@@ -28,7 +36,11 @@ support other frequency ranges.
        * 6 12-bit analog inputs (11 bits with single-ended sensors)
        * 2 channels of serial I/O
        * digital I/O
-* Software Features (planned)
+* 100mA 3.3V LDO regulator
+       * takes input from USB interface by default
+       * output appears on 8-pin companion connector
+       * can take input from 8-pin companion connector in non-USB applications
+* Software Features
        * Written mostly in C with some 8051 assembler
        * Runs from on-chip flash, uses on-chip RAM
        * USB serial emulation for data interface
@@ -39,10 +51,14 @@ support other frequency ranges.
        * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
        * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
 
-## [Production History](production) ##
+## [Production History](../production) ##
 
 ## Artifacts ##
 
+There is a single manual for all Altus Metrum products,
+which is available in [html](../AltOS/doc/altusmetrum.html) and 
+[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
 [hw/teledongle](http://git.gag.com/?p=hw/teledongle;a=summary).  
@@ -61,7 +77,5 @@ source code and pre-built packages can be found on the
 
 ## Future Plans ##
 
-We hope to fabricate an initial batch of TeleDongle v0.2 boards in
-February 2010, and intend to make both loaded circuit boards and complete
-packaged units available for sale soon.
+We hope to return TeleDongle to production soon.