TeleBT provides the equivalent of a [TeleDongle](../TeleDongle), with
the addition of [Bluetooth](http://www.bluetooth.com) as an alternative to
-USB for connection to the ground station computer.
+USB for connection to the ground station computer.
The RF filter components are set for use in the vicinity of 435 Mhz.
-These are photos of prototype version 0.2:
+These are photos of the first production version, 1.0:
-<a href="v0.2/telebt-v0.2-top.jpg"> <img src="v0.2/telebt-v0.2-top-thumb.jpg"></a>
-<a href="v0.2/telebt-v0.2-bottom.jpg"> <img src="v0.2/telebt-v0.2-bottom-thumb.jpg"></a>
+<a href="v1.0/telebt-top.jpg"> <img src="v1.0/telebt-top-thumb.jpg"></a>
+<a href="v1.0/telebt-bottom.jpg"> <img src="v1.0/telebt-bottom-thumb.jpg"></a>
+
+And here's what it looks like packaged with battery, attached to an Arrow
+3-element yagi, ready for use:
+
+<a href="v1.0/telebt-onyagi.jpg"> <img src="v1.0/telebt-onyagi-thumb.jpg"></a>
+<a href="v1.0/telebt-inuse.jpg"> <img src="v1.0/telebt-inuse-thumb.jpg"></a>
For the latest TeleBT firmware and related software, please
-visit the [AltOS](../AltOS) page on this site.
+visit the [AltOS](../AltOS) and [AltosDroid](../AltosDroid) pages on this site.
## Features ##
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
-* 900mAh LiPo battery charged via USB
+* 850mAh LiPo battery charged via USB
### Developer View ###
* 2 channels of serial I/O
* digital I/O
* interfaced to Arduino via async serial plus two handshake pins
-* Raycom Bluetooth module interfaced to the CC1111 via async serial
+* Rayson BTM-182 (Bluetooth SPP module) with async interface to CC1111
* 150mA 3.3V LDO regulator
* input and output appear on 8-pin companion connector
-* Software Features
+* Firmware Features
* Written mostly in C with some 8051 assembler
* Runs from on-chip flash, uses on-chip RAM
* USB serial emulation for data interface
[git.gag.com](http://git.gag.com) in the project
[hw/teleshield](http://git.gag.com/?p=hw/telebt;a=summary).
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of the files for Production PCB version 1.0 in more easily readable form.
+
+* [schematic](v1.0/telebt.pdf)
+* [pcb artwork](v1.0/telebt.pcb.pdf)
+* [bill of materials](v1.0/partslist.csv)
+
## Future Plans ##
-Two prototype versions have been built with different physical form factors.
-We have working firmware, and a prototype of support in AltosUI. Work is
-also underway on an [Android](http://www.android.com) version of AltosUI.
+The inventory of version 1.0 boards was lost in the fire that destroyed
+Bdale's home in June of 2013. Version 1.1 will be available for purchase
+we hope by the end of October 2013.
-No firm schedule for production and sale of TeleBT has been set yet.
+TeleBT works with both AltosUI version 1.2 and later, and a new
+[Android](http://www.android.com) application
+called [AltosDroid](../AltosDroid).