TeleBT provides the equivalent of a [TeleDongle](../TeleDongle), with
the addition of [Bluetooth](http://www.bluetooth.com) as an alternative to
-USB for connection to the ground station computer.
+USB for connection to the ground station computer.
The RF filter components are set for use in the vicinity of 435 Mhz.
-These are photos of prototype version 0.3:
+These are photos of the first production version, 1.0:
-<a href="v0.3/telebt-top.jpg"> <img src="v0.3/telebt-top-thumb.jpg"></a>
-<a href="v0.3/telebt-bottom.jpg"> <img src="v0.3/telebt-bottom-thumb.jpg"></a>
+<a href="v1.0/telebt-top.jpg"> <img src="v1.0/telebt-top-thumb.jpg"></a>
+<a href="v1.0/telebt-bottom.jpg"> <img src="v1.0/telebt-bottom-thumb.jpg"></a>
For the latest TeleBT firmware and related software, please
visit the [AltOS](../AltOS) page on this site.
* micro USB interface
* 4 pin Tyco MicroMaTch connector for debug and flash programming
* 8 pin Tyco MicroMaTch connector supports serial or SPI interface
-* 900mAh LiPo battery charged via USB
+* 850mAh LiPo battery charged via USB
### Developer View ###
* Rayson BTM-182 (Bluetooth SPP module) with async interface to CC1111
* 150mA 3.3V LDO regulator
* input and output appear on 8-pin companion connector
-* Software Features
+* Firmware Features
* Written mostly in C with some 8051 assembler
* Runs from on-chip flash, uses on-chip RAM
* USB serial emulation for data interface
## Future Plans ##
-Two prototype versions have been built with different physical form factors.
-We have working firmware, and a prototype of support in AltosUI. Work is
-also underway on an [Android](http://www.android.com) version of AltosUI.
+Production version 1.0 is back from assembly and works great! TeleBT works
+with both AltosUI version 1.2 and later (not released yet), and a new
+[Android](http://www.android.com) application called AltosDroid.
-Prototype version 0.3 is working, and we hope to move TeleBT to production
-soon.
+TeleBT will be available to purchase very soon.