Update micropeak photos to v1.0 boards
[web/altusmetrum] / MicroPeak / index.mdwn
index 647f21e220591dcd0d4ac223d1ea6da1981d2316..ee4d7a5f263807530fcf8efb859a5119cecb8b96 100644 (file)
@@ -6,12 +6,12 @@
 Micropeak is a peak-recording barometric altimeter for precision model
 rocketry altitude measurements.
 
-<a href="v0.1/micropeak-dime.jpg"><img
-src="v0.1/micropeak-dime-640.jpg"></a>
+<a href="v1.0/micropeak-dime.jpg"><img
+src="v1.0/micropeak-dime-640.jpg"></a>
 
-Production units will be available from the
-[Garbee and Garbee](http://auric.gag.com) web
-store.
+Production units are available from the
+[Garbee and Garbee](http://auric.gag.com/index.php?route=product/product&product_id=80) 
+web store 
 
 ## Documentation ##
 
@@ -22,7 +22,7 @@ The MicroPeak manual is available in
 ## Hardware Features ##
 
  * Measure ground pressure and peak altitude pressure.
- * Blue LED blinks out maximum height in decimeters.
+ * Orange LED blinks out maximum height in decimeters.
  * 18mm x 14mm. 1.9g including battery.
  * Power switch.
 
@@ -39,14 +39,14 @@ The CR1025 battery holder is mounted on the back side of the board, so there are
 MicroPeak includes an integrated battery holder on the back side of
 the circuit board.
 
-<a href="v0.1/micro-peak-back.jpg"><img
-src="v0.1/micro-peak-back-640.jpg"></a>
+<a href="v1.0/micropeak-back.jpg"><img
+src="v1.0/micropeak-back-640.jpg"></a>
 
 ## Developer View ##
 
 Here's a close-up view of the hardware
 
-<a href="v0.1/micropeak.jpg"><img src="v0.1/micropeak-640.jpg"></a>
+<a href="v1.0/micropeak.jpg"><img src="v1.0/micropeak-640.jpg"></a>
 
  * Hardware Features
        * [ATMEL ATtiny85](http://www.atmel.com/devices/attiny85.aspx) Microcontroller
@@ -59,14 +59,15 @@ Here's a close-up view of the hardware
                * High precision — 2.4Pa resolution (approximately 20cm at sea level)
                * Factory calibrated.
        * CR1025 Lithium Battery
-               * 30mAh. Runs MicroPeak for 10 hours on the pad or in flight
+               * 30mAh. Runs MicroPeak for more than 40 hours on the pad or in flight
+       * [OSRAM LO T67K](http://catalog.osram-os.com/catalogue/catalogue.do?favOid=000000000002269f00090023&act=showBookmark) orange LED
        * Standard 6-pin AVR programming interface.
 
  * Software Features
        * Written in C
        * Samples pressure every 96ms
        * Delay 30s after power-on to finish airframe prep
-       * Detect boost with 10m altitude change
+       * Detect boost with 20m altitude change
        * Exponential averaging filter to minimize transient effects.
 
  * Tools Used