easytimer prototypes loaded

[web/altusmetrum] / MicroPeak / index.mdwn

diff --git a/MicroPeak/index.mdwn b/MicroPeak/index.mdwn
index b6fecd362ecfae6cfd4ea3aa75cd02de19ebaa00..248492866f98d2675a6c5125ba38b9e7aaed7356 100644 (file)
--- a/MicroPeak/index.mdwn
+++ b/MicroPeak/index.mdwn
@@ -3,15 +3,13 @@
 
 # Introducing MicroPeak by AltusMetrum #
 
-Micropeak is a peak-recording barometric altimeter for precision model
-rocketry altitude measurements.
+Micropeak is a barometric logging altimeter for precision model
+rocketry altitude measurements. 
 
-<a href="v0.1/micropeak-dime.jpg"><img
-src="v0.1/micropeak-dime-640.jpg"></a>
+<a href="v1.0/micropeak-dime.jpg"><img
+src="v1.0/micropeak-dime-640.jpg"></a>
 
-Production units are available from the
-[Garbee and Garbee](http://auric.gag.com/index.php?route=product/product&product_id=80) 
-web store 
+Data download is available using the [MicroPeak USB adapter](../MicroPeakUSB).
 
 ## Documentation ##
 
@@ -19,9 +17,28 @@ The MicroPeak manual is available in
 [html](../AltOS/doc/micropeak.html) and
 [pdf](../AltOS/doc/micropeak.pdf) formats.
 
+## Software ##
+
+The MicroPeak application runs on Linux, Mac OS X and Windows. It
+communicates with the [MicroPeak USB adapter](../MicroPeakUSB) to download and analyze
+flight data. It's written in [Java](http://java.com) and offers the
+same functionality and interface on all three platforms. It uses the
+FTDI USB Serial drivers to communicate with the hardware. If you're
+running Mac OS X or Windows, a compatible version of those drivers is
+included with the software. You can also install a different from from
+the [FTDI Driver](http://www.ftdichip.com/FTDrivers.htm) page.
+
+MicroPeak is part of the larger [AltOS](/AltOS) suite of software, which also
+includes a dedicated [TeleGPS](/TeleGPS) application.
+
+### Available Versions ###
+
+[[!inline pages="./releases/* and !*/Discussion and !*.sh and !*.html and !*.bz2 and !*.zip and !*.exe and !*.dmg" show="10" rss="no" raw="yes" ]]
+
 ## Hardware Features ##
 
  * Measure ground pressure and peak altitude pressure.
+ * Logs 48 seconds of flight data
  * Orange LED blinks out maximum height in decimeters.
  * 18mm x 14mm. 1.9g including battery.
  * Power switch.
@@ -39,14 +56,14 @@ The CR1025 battery holder is mounted on the back side of the board, so there are
 MicroPeak includes an integrated battery holder on the back side of
 the circuit board.
 
-<a href="v0.1/micro-peak-back.jpg"><img
-src="v0.1/micro-peak-back-640.jpg"></a>
+<a href="v1.0/micropeak-back.jpg"><img
+src="v1.0/micropeak-back-640.jpg"></a>
 
 ## Developer View ##
 
 Here's a close-up view of the hardware
 
-<a href="v0.1/micropeak.jpg"><img src="v0.1/micropeak-640.jpg"></a>
+<a href="v1.0/micropeak.jpg"><img src="v1.0/micropeak-640.jpg"></a>
 
  * Hardware Features
        * [ATMEL ATtiny85](http://www.atmel.com/devices/attiny85.aspx) Microcontroller
@@ -60,13 +77,14 @@ Here's a close-up view of the hardware
                * Factory calibrated.
        * CR1025 Lithium Battery
                * 30mAh. Runs MicroPeak for more than 40 hours on the pad or in flight
+       * [OSRAM LO T67K](http://catalog.osram-os.com/catalogue/catalogue.do?favOid=000000000002269f00090023&act=showBookmark) orange LED
        * Standard 6-pin AVR programming interface.
 
  * Software Features
        * Written in C
        * Samples pressure every 96ms
        * Delay 30s after power-on to finish airframe prep
-       * Detect boost with 20m altitude change
+       * Detect boost with 30m altitude change
        * Exponential averaging filter to minimize transient effects.
 
  * Tools Used