Fix easymini v2.0 mistakes

[web/altusmetrum] / EasyMini / index.mdwn

diff --git a/EasyMini/index.mdwn b/EasyMini/index.mdwn
index 9f565f346f3ae573860acb3732fffee136c5bdf2..c1bf79a5fdeaa94aca9e4e15de934d3e1d55d4d1 100644 (file)
--- a/EasyMini/index.mdwn
+++ b/EasyMini/index.mdwn
@@ -1,20 +1,20 @@
+[[!meta title="EasyMini"]]
 # EasyMini
 
 This is a small, baro-only recording dual-deploy altimeter for 
 model rocketry
 
-EasyMini is currently in development, with a handful of prototype
-boards built and flown. Production units will eventually be available from the 
-[Garbee and Garbee](http://auric.gag.com) web 
-store.
+EasyMini is available from the [Garbee and Garbee](https://shop.gag.com) web 
+store, and should be available from our distributors soon.
 
 For the latest EasyMini firmware and related ground station software, please
-visit the [AltOS](../AltOS) page on this site.
+visit the [AltOS](../AltOS) page on this site.  EasyMini requires AltOS
+version 1.3 or later.
 
-These are photos of our current prototype version: 
+These are photos of version 2.0:
 
-<a href="v0.2/easymini-top.jpg"> <img src="v0.2/easymini-top-thumb.jpg"></a>
-<a href="v0.2/easymini-parts.jpg"> <img src="v1.0/easymini-parts-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-top.jpg"> <img src="v2.0/easymini-v2.0-top-thumb.jpg"></a>
+<a href="v2.0/easymini-v2.0-bottom.jpg"> <img src="v2.0/easymini-v2.0-bottom-thumb.jpg"></a>
 
 ## Features ##
 
@@ -25,12 +25,13 @@ These are photos of our current prototype version:
 * Barometric pressure sensor good to 100k feet MSL
 * Designed to use a battery supplying 3.7V-12V.
 * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
-* 2MB on-board data logging flash
+* 1MB on-board data logging flash
+* Weighs only 6.5g (less than 1/4 oz)
 
 ### Developer View ###
 
 * Hardware Features
-       * [NXP LPC11U14](http://www.nxp.com/products/microcontrollers/cortex_m0_m0/LPC11U14FHI33.html) System-on-Chip
+       * [STM32F042])http://www.st.com/en/microcontrollers/stm32f042f6.html) System-on-Chip
                * ARM Cortex-M0 MCU
                * 32k Flash
                * 6k RAM
@@ -39,7 +40,7 @@ These are photos of our current prototype version:
                * I2C, SPI, async serial
                * digital I/O
        * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor
-       * 2MB SPI flash
+       * 1MB SPI flash
 * Software Features
        * Written mostly in C with some ARM assembler
        * Runs from on-chip flash, uses on-chip RAM, stores flight data to
@@ -53,9 +54,29 @@ These are photos of our current prototype version:
 
 ## Artifacts ##
 
-There is a single manual for EasyMini and all other Altus Metrum products,
-which is available in [html](../AltOS/doc/altusmetrum.html) and 
-[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+There is a shorter manual for EasyMini which is available in
+[html](../AltOS/doc/easymini.html) and
+[pdf](../AltOS/doc/easymini.pdf) formats. EasyMini is also documented
+in the comprehensive Altus Metrum manual in
+[html](../AltOS/doc/altusmetrum.html) and
+[pdf](../AltOS/doc/altusmetrum.pdf) formats
+
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/easymini-outline.pdf) format.
+
+Thanks to Bryan Duke, there's also a 3d model of EasyMini available on 
+[Thingiverse](http://www.thingiverse.com/thing:1946852). 
 
 The hardware design files can be found on [git.gag.com](http://git.gag.com) 
 in the project [hw/easymini](http://git.gag.com/?p=hw/easymini;a=summary).  
+
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of the files for production PCB version 1.0 in more easily readable form.  
+
+* [schematic](v2.0/easymini-sch.pdf)
+* [pcb artwork](v2.0/easymini-pcb.pdf)
+
+## Older Version ##
+
+Easy Mini [version 1.0](v1.0) was largely the same design but used a
+different processor.